← Commit history
page.json+142−8@@ -1,13 +1,152 @@ {+ "schema_version": 1,+ "type": "component", "slug": "lp2951acm-3-3",+ "title": "LP2951ACM-3.3",+ "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "power management (pmic)", "lp2951acm-3.3" ],+ "component": {+ "mpn": "LP2951ACM-3.3",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lp2951-n",+ "parts": {+ "symbol": "lp2951acm-3-3.kicad_sym",+ "footprint": "lp2951acm-3-3.kicad_mod",+ "model_3d": "lp2951acm-3-3.glb",+ "model_3d_step": "lp2951acm-3-3.step",+ "lbr": "lp2951acm-3-3.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage (3.3 V nominal, \u00b10.5% typ). Sourced through internal PMOS pass element; rated to 100 mA. Requires an output capacitor (\u2265 2.2 \u00b5F for 3.3-V version) with ESR of 10 m\u03a9-6 \u03a9 for stability."+ },+ {+ "number": "2",+ "name": "SENSE",+ "type": "input",+ "description": "Output voltage sense (Kelvin-sense) input for the internal error amplifier. Normally tied to OUT (pin 1) at the load to compensate for IR drop in the output trace. Do not leave floating."+ },+ {+ "number": "3",+ "name": "SHUTDOWN",+ "type": "input",+ "description": "Logic-level shutdown control. Regulator ON when driven low (\u2264 0.6 V ensured over -40 \u00b0C to 125 \u00b0C); regulator OFF when driven high (\u2265 2 V). Input threshold typ 1.3 V; may be tied to IN or driven from CMOS/TTL logic."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference and return for internal circuitry. On the WSON (NGT) variant the exposed DAP must also be connected to this pin/GND."+ },+ {+ "number": "5",+ "name": "ERROR",+ "type": "output",+ "description": "Open-collector active-low error flag. Pulls low when the output falls ~5% below nominal (dropout / undervoltage warning); useful as a power-on-reset. Off-state leakage \u2264 1 \u00b5A at 30 V; VOL \u2264 250 mV at IOL = 400 \u00b5A. Requires an external pull-up resistor."+ },+ {+ "number": "6",+ "name": "VTAP",+ "type": "output",+ "description": "Output of the internal resistor divider tap (nominally 1.235 V reference for the 3.3-V fixed configuration). Tie to FEEDBACK (pin 7) to select the factory-preset 3.3-V output; leave open (or tie to an external divider node) when programming a custom output voltage."+ },+ {+ "number": "7",+ "name": "FEEDBACK",+ "type": "input",+ "description": "Error-amplifier feedback input; internally regulated to VREF \u2248 1.235 V. Tie to VTAP (pin 6) for the fixed 3.3-V output, or connect to an external R1/R2 divider from OUT to program 1.24 V \u2264 VOUT \u2264 29 V. Input bias current ~20 nA (typ)."+ },+ {+ "number": "8",+ "name": "IN",+ "type": "power_in",+ "description": "Input supply voltage, 2.3 V to 30 V. Requires a bypass capacitor (\u2265 1 \u00b5F) close to the pin. Dropout is typically 40 mV at 100 \u00b5A and 380 mV at 100 mA of load."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lp2951-n",+ "pages": null,+ "sha256": "b9e1f8851a20b9c9",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "SOIC-8",+ "Category": "Power Management (PMIC)",+ "Pins": "8"+ }+ },+ "variants": [+ {+ "mpn": "LP2951ACM-3.3/NOPB",+ "kind": "packaging"+ },+ {+ "mpn": "LP2951ACMX-3.3/NOPB",+ "kind": "unknown"+ },+ {+ "mpn": "LP2951ACMM-3.3/NOPB",+ "kind": "unknown"+ },+ {+ "mpn": "LP2951ACMMX-3.3/NOPB",+ "kind": "unknown"+ },+ {+ "mpn": "LP2951ACSDX-3.3/NOPB",+ "kind": "unknown"+ },+ {+ "mpn": "LP2951ACN/NOPB",+ "kind": "unknown"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "lp2951acm-3.3"+ ],+ "discovery_pitch": "LP2951ACM-3.3 (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +164,5 @@ "docs/lp2951acm-3-3-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }