← Commit history

Initial commit: component/lp2951acm-3-3

Ray ·7567a1c5bf ·
2 files changed +88
README.mdadded+54
@@ -0,0 +1,54 @@+# LP2951ACM-3.3++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8++LP2951ACM-3.3 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OUT | power_out | Regulated output voltage (3.3 V nominal, ±0.5% typ). Sourced through internal PMOS pass element; rated to 100 mA. Requires an output capacitor (≥ 2.2 µF for 3.3-V version) with ESR of 10 mΩ-6 Ω for stability. |+| 2 | SENSE | input | Output voltage sense (Kelvin-sense) input for the internal error amplifier. Normally tied to OUT (pin 1) at the load to compensate for IR drop in the output trace. Do not leave floating. |+| 3 | SHUTDOWN | input | Logic-level shutdown control. Regulator ON when driven low (≤ 0.6 V ensured over -40 °C to 125 °C); regulator OFF when driven high (≥ 2 V). Input threshold typ 1.3 V; may be tied to IN or driven from CMOS/TTL logic. |+| 4 | GND | power_in | Device ground reference and return for internal circuitry. On the WSON (NGT) variant the exposed DAP must also be connected to this pin/GND. |+| 5 | ERROR | output | Open-collector active-low error flag. Pulls low when the output falls ~5% below nominal (dropout / undervoltage warning); useful as a power-on-reset. Off-state leakage ≤ 1 µA at 30 V; VOL ≤ 250 mV at IOL = 400 µA. Requires an external pull-up resistor. |+| 6 | VTAP | output | Output of the internal resistor divider tap (nominally 1.235 V reference for the 3.3-V fixed configuration). Tie to FEEDBACK (pin 7) to select the factory-preset 3.3-V output; leave open (or tie to an external divider node) when programming a custom output voltage. |+| 7 | FEEDBACK | input | Error-amplifier feedback input; internally regulated to VREF ≈ 1.235 V. Tie to VTAP (pin 6) for the fixed 3.3-V output, or connect to an external R1/R2 divider from OUT to program 1.24 V ≤ VOUT ≤ 29 V. Input bias current ~20 nA (typ). |+| 8 | IN | power_in | Input supply voltage, 2.3 V to 30 V. Requires a bypass capacitor (≥ 1 µF) close to the pin. Dropout is typically 40 mV at 100 µA and 380 mV at 100 mA of load. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## Ordering variants++Same part, different packaging or reel option.++- `LP2951ACM-3.3/NOPB`+- `LP2951ACMX-3.3/NOPB`+- `LP2951ACMM-3.3/NOPB`+- `LP2951ACMMX-3.3/NOPB`+- `LP2951ACSDX-3.3/NOPB`+- `LP2951ACN/NOPB`++## CAD (KiCad official)++- Symbol: `LP2951ACM-3.3`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp2951-n) (None pp, sha256 `b9e1f8851a20b9c9`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp2951acm-3-3-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lp2951acm-3-3",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lp2951acm-3.3"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lp2951acm-3-3.kicad_sym",+    "lp2951acm-3-3.kicad_mod",+    "lp2951acm-3-3.glb",+    "lp2951acm-3-3.step",+    "lp2951acm-3-3.lbr",+    "docs/hero.png",+    "docs/lp2951acm-3-3-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file