← Commit history

Set visibility: public

Ray ·6d923560d1 · ·parent 8d16f10
1 file changed +9−6
page.json+9−6
@@ -32,19 +32,19 @@         "number": "1",         "name": "Output",         "type": "power_out",-        "description": "Regulated voltage output, up to 100 mA. Requires a minimum 1.0 \u00b5F output capacitor for stability."+        "description": "Regulated voltage output, up to 100 mA. Requires a minimum 1.0 µF output capacitor for stability."       },       {         "number": "2",         "name": "Sense",         "type": "input",-        "description": "Kelvin sense connection to the top of the internal 182 k\u03a9 feedback divider. Tie to Output (pin 1) at the load for preset-voltage operation."+        "description": "Kelvin sense connection to the top of the internal 182 kΩ feedback divider. Tie to Output (pin 1) at the load for preset-voltage operation."       },       {         "number": "3",         "name": "Shutdown",         "type": "input",-        "description": "Logic-level shutdown input. Logic '0' (0 to 0.7 V) enables the regulator; logic '1' (2.0 to 30 V) disables it. Draws ~35 \u00b5A at 2.4 V."+        "description": "Logic-level shutdown input. Logic '0' (0 to 0.7 V) enables the regulator; logic '1' (2.0 to 30 V) disables it. Draws ~35 µA at 2.4 V."       },       {         "number": "4",@@ -56,13 +56,13 @@         "number": "5",         "name": "Error_Output",         "type": "output",-        "description": "Active-low, open-collector out-of-regulation flag. Pulls low (VOL \u2264 250 mV at 400 \u00b5A) when the output falls ~5% below nominal. Can drive a \u00b5P power-on-reset. Requires external pull-up; 30 V max."+        "description": "Active-low, open-collector out-of-regulation flag. Pulls low (VOL ≤ 250 mV at 400 µA) when the output falls ~5% below nominal. Can drive a µP power-on-reset. Requires external pull-up; 30 V max."       },       {         "number": "6",         "name": "VO_Tap",         "type": "output",-        "description": "Tap point of the internal 182 k\u03a9 / 60 k\u03a9 divider producing the 1.235 V reference node when tied to Feedback (pin 7). Connect pin 6 to pin 7 for preset output; leave open and use an external divider for adjustable operation."+        "description": "Tap point of the internal 182 kΩ / 60 kΩ divider producing the 1.235 V reference node when tied to Feedback (pin 7). Connect pin 6 to pin 7 for preset output; leave open and use an external divider for adjustable operation."       },       {         "number": "7",@@ -138,5 +138,8 @@     "docs/lp2951acdr2g-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file