← Commit history
lp28303aqvf: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+86−1
page.json+86−1@@ -33,5 +33,90 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LP28303AQVF",+ "manufacturer": "LOWPOWER",+ "package": "TDFN-10-EP(3x3)",+ "pin_count": 10,+ "category": "Battery Management",+ "parts": {+ "symbol": "lp28303aqvf.kicad_sym",+ "footprint": "lp28303aqvf.kicad_mod",+ "model_3d": "lp28303aqvf-etched.glb",+ "model_3d_plain": "lp28303aqvf.glb",+ "model_3d_step": "lp28303aqvf-etched.step",+ "model_3d_step_plain": "lp28303aqvf.step",+ "lbr": "lp28303aqvf.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog (signal) ground reference for internal control and reference circuitry."+ },+ {+ "number": "2",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground return for the synchronous buck power stage. Also serves as the exposed thermal pad; connect to the ground plane for proper power dissipation."+ },+ {+ "number": "3",+ "name": "VIN",+ "type": "power_in",+ "description": "Positive supply voltage input, 4.5V-5.5V (7V absolute max). Decouple with a 10 µF or larger surface-mount ceramic capacitor close to the pin. UVLO rising 4.1V / falling 3.9V; OVP rising 6.0V / falling 5.7V."+ },+ {+ "number": "4",+ "name": "CHRG",+ "type": "output",+ "description": "Open-drain charge-status output. Pulled low by an internal N-channel MOSFET while the battery is charging; high-impedance otherwise. VOL ≤ 0.5V at ICHRG = 5 mA. Typically drives a status LED with a series resistor to VIN."+ },+ {+ "number": "5",+ "name": "FULL",+ "type": "output",+ "description": "Open-drain charge-complete status output. Pulled low by an internal N-channel MOSFET when charging is complete; high-impedance otherwise. VOL ≤ 0.5V at IFULL = 5 mA."+ },+ {+ "number": "6",+ "name": "NTC",+ "type": "input",+ "description": "Negative-temperature-coefficient thermistor sense input for battery-pack temperature qualification. Charging halts when VNTC is outside VNTC1 (45% VIN) to VNTC2 (80% VIN). Tie to GND (< 100 mV) to disable temperature sensing; pulling to VIN puts the part into shutdown and resets the internal timer."+ },+ {+ "number": "7",+ "name": "BAT",+ "type": "power_out",+ "description": "Battery pin. Connects to the positive terminal of the Li-Ion cell (via the sense resistor RCS between CS and BAT). Regulated float voltage 4.2V ±1%; automatic recharge threshold ≈4.05V (VFLOAT − 150 mV)."+ },+ {+ "number": "8",+ "name": "CS",+ "type": "input",+ "description": "Current-sense input. Charge current is set by an external resistor RCS between CS and BAT with an internal 50 mV reference: IBAT = 50 mV / RCS (e.g. RCS = 25 mΩ → 2A, RCS = 20 mΩ → 2.5A). C/10 termination at ITERM ≈ 100 mA with RCS = 50 mΩ."+ },+ {+ "number": "9",+ "name": "SW",+ "type": "output",+ "description": "Switch node of the internal synchronous buck converter. Connect to the external inductor (typ. 4.7 µH) feeding the sense resistor and battery. Operates at 600 kHz with switch rise/fall times < 5 ns; keep track short to minimise EMI."+ },+ {+ "number": "10",+ "name": "SW",+ "type": "output",+ "description": "Switch node of the internal synchronous buck converter (paralleled with pin 9). Connect to the external inductor. See pin 9 for full description."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}