← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# LP28303AQVF++**LOWPOWER** · Battery Management · TDFN-10-EP(3x3)++LP28303AQVF from LOWPOWER, in a TDFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AGND | power_in | Analog (signal) ground reference for internal control and reference circuitry. |+| 2 | PGND | power_in | Power ground return for the synchronous buck power stage. Also serves as the exposed thermal pad; connect to the ground plane for proper power dissipation. |+| 3 | VIN | power_in | Positive supply voltage input, 4.5V-5.5V (7V absolute max). Decouple with a 10 µF or larger surface-mount ceramic capacitor close to the pin. UVLO rising 4.1V / falling 3.9V; OVP rising 6.0V / falling 5.7V. |+| 4 | CHRG | output | Open-drain charge-status output. Pulled low by an internal N-channel MOSFET while the battery is charging; high-impedance otherwise. VOL ≤ 0.5V at ICHRG = 5 mA. Typically drives a status LED with a series resistor to VIN. |+| 5 | FULL | output | Open-drain charge-complete status output. Pulled low by an internal N-channel MOSFET when charging is complete; high-impedance otherwise. VOL ≤ 0.5V at IFULL = 5 mA. |+| 6 | NTC | input | Negative-temperature-coefficient thermistor sense input for battery-pack temperature qualification. Charging halts when VNTC is outside VNTC1 (45% VIN) to VNTC2 (80% VIN). Tie to GND (< 100 mV) to disable temperature sensing; pulling to VIN puts the part into shutdown and resets the internal timer. |+| 7 | BAT | power_out | Battery pin. Connects to the positive terminal of the Li-Ion cell (via the sense resistor RCS between CS and BAT). Regulated float voltage 4.2V ±1%; automatic recharge threshold ≈4.05V (VFLOAT − 150 mV). |+| 8 | CS | input | Current-sense input. Charge current is set by an external resistor RCS between CS and BAT with an internal 50 mV reference: IBAT = 50 mV / RCS (e.g. RCS = 25 mΩ → 2A, RCS = 20 mΩ → 2.5A). C/10 termination at ITERM ≈ 100 mA with RCS = 50 mΩ. |+| 9 | SW | output | Switch node of the internal synchronous buck converter. Connect to the external inductor (typ. 4.7 µH) feeding the sense resistor and battery. Operates at 600 kHz with switch rise/fall times < 5 ns; keep track short to minimise EMI. |+| 10 | SW | output | Switch node of the internal synchronous buck converter (paralleled with pin 9). Connect to the external inductor. See pin 9 for full description. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | LOWPOWER |+| Package | TDFN-10-EP(3x3) |+| Category | PMIC |+| Pins | 10 |++## Ordering variants++- `LP28303AQVF`+- `LP28303AQVFSPF`++## CAD (KiCad official)++- Symbol: `LP28303AQVF`+- Footprint: `Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm`+- 3D model: TDFN-10-EP(3x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [LOWPOWER datasheet](docs/lp28303aqvf-datasheet.pdf) (None pp, sha256 `f160b4d8c7d33918`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp28303aqvf-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lp28303aqvf",+ "version": "0.1.0",+ "type": "component",+ "description": "LOWPOWER Battery Management, TDFN-10-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "lp28303aqvf"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lp28303aqvf.kicad_sym",+ "lp28303aqvf.kicad_mod",+ "lp28303aqvf.glb",+ "lp28303aqvf.step",+ "lp28303aqvf.lbr",+ "docs/hero.png",+ "docs/lp28303aqvf-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}