← Commit history

Initial commit: component/lp28056spf

Ray ·703996c4ce ·
2 files changed +82
README.mdadded+48
@@ -0,0 +1,48 @@+# LP28056SPF++**LOWPOWER** · Battery Management · ESOP-8++LP28056SPF from LOWPOWER, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No connect. Leave floating or tie to ground per PCB layout preference. |+| 2 | ISET | input | Charge current program, charge current monitor, and shutdown pin. A resistor RISET from this pin to GND programs the charge current: IBAT = 1000V / RISET (e.g. 1kΩ → 1000mA, 2kΩ → 500mA). Pin voltage is ~1V in current mode; leaving RISET open (NC) puts the device into shutdown (~50µA supply, ±1µA on BAT). |+| 3 | VSS | power_in | Signal ground (system ground reference). Connect to the ground plane along with PGND. |+| 4 | VIN | power_in | Input power source, 4.5V to 6.5V (typ 5V, absolute max 8V). Connect to a wall adapter or USB 5V rail. Bypass with ~10µF to GND close to the pin. |+| 5 | BAT | power_out | Charge current output to the single-cell Li-ion battery. Regulated to 4.2V ±1% float voltage; sources up to 1200mA. Requires a 10µF tantalum cap for stability if no battery is present, otherwise a 0.1µF ceramic when a battery is connected. |+| 6 | STAT2 | output | Open-drain charge status output (active-low when charge complete). During charging, this pin is high impedance (external pull-up pulls HIGH); when the charge cycle terminates, an internal N-channel MOSFET pulls it LOW. Requires an external pull-up resistor (typ. to LED or MCU rail). |+| 7 | STAT1 | output | Open-drain charge status output (active-low while charging). During charging, an internal N-channel MOSFET pulls this pin LOW; when the charge cycle completes, the pin goes high impedance (external pull-up pulls HIGH). Requires an external pull-up resistor. |+| 8 | NC | unconnected | No connect. Leave floating or tie to ground per PCB layout preference. |+| 9 | PGND | power_in | Power ground / exposed thermal pad on the ESOP-8 underside. Must be soldered to the PCB ground plane for both electrical return of the charge current and thermal dissipation (θJA = 50°C/W). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | LOWPOWER |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++- `LP28056SPF`++## CAD (KiCad official)++- Symbol: `LP28056SPF`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [LOWPOWER datasheet](docs/lp28056spf-datasheet.pdf) (8 pp, sha256 `d88550970528eed6`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp28056spf-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lp28056spf",+  "version": "0.1.0",+  "type": "component",+  "description": "LOWPOWER Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "lp28056spf"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lp28056spf.kicad_sym",+    "lp28056spf.kicad_mod",+    "lp28056spf.glb",+    "lp28056spf.step",+    "lp28056spf.lbr",+    "docs/hero.png",+    "docs/lp28056spf-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file