← Commit history

Set visibility: public

Ray ·0b0e15eb1c · ·parent a64da72
1 file changed +8−5
page.json+8−5
@@ -38,7 +38,7 @@         "number": "2",         "name": "ISET",         "type": "input",-        "description": "Charge current program, charge current monitor, and shutdown pin. A resistor RISET from this pin to GND programs the charge current: IBAT = 1000V / RISET (e.g. 1k\u03a9 \u2192 1000mA, 2k\u03a9 \u2192 500mA). Pin voltage is ~1V in current mode; leaving RISET open (NC) puts the device into shutdown (~50\u00b5A supply, \u00b11\u00b5A on BAT)."+        "description": "Charge current program, charge current monitor, and shutdown pin. A resistor RISET from this pin to GND programs the charge current: IBAT = 1000V / RISET (e.g. 1kΩ → 1000mA, 2kΩ → 500mA). Pin voltage is ~1V in current mode; leaving RISET open (NC) puts the device into shutdown (~50µA supply, ±1µA on BAT)."       },       {         "number": "3",@@ -50,13 +50,13 @@         "number": "4",         "name": "VIN",         "type": "power_in",-        "description": "Input power source, 4.5V to 6.5V (typ 5V, absolute max 8V). Connect to a wall adapter or USB 5V rail. Bypass with ~10\u00b5F to GND close to the pin."+        "description": "Input power source, 4.5V to 6.5V (typ 5V, absolute max 8V). Connect to a wall adapter or USB 5V rail. Bypass with ~10µF to GND close to the pin."       },       {         "number": "5",         "name": "BAT",         "type": "power_out",-        "description": "Charge current output to the single-cell Li-ion battery. Regulated to 4.2V \u00b11% float voltage; sources up to 1200mA. Requires a 10\u00b5F tantalum cap for stability if no battery is present, otherwise a 0.1\u00b5F ceramic when a battery is connected."+        "description": "Charge current output to the single-cell Li-ion battery. Regulated to 4.2V ±1% float voltage; sources up to 1200mA. Requires a 10µF tantalum cap for stability if no battery is present, otherwise a 0.1µF ceramic when a battery is connected."       },       {         "number": "6",@@ -80,7 +80,7 @@         "number": "9",         "name": "PGND",         "type": "power_in",-        "description": "Power ground / exposed thermal pad on the ESOP-8 underside. Must be soldered to the PCB ground plane for both electrical return of the charge current and thermal dissipation (\u03b8JA = 50\u00b0C/W)."+        "description": "Power ground / exposed thermal pad on the ESOP-8 underside. Must be soldered to the PCB ground plane for both electrical return of the charge current and thermal dissipation (θJA = 50°C/W)."       }     ],     "provenance": {@@ -144,5 +144,8 @@     "docs/lp28056spf-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file