← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# LP28013SQVF++**LOWPOWER** · Battery Management · TDFN-10-EP(3x3)++LP28013SQVF from LOWPOWER, in a TDFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Input power source pin. Connect to a wall adapter; operating range 4.5V-6.5V with absolute maximum 28V and internal OVP at ~7V. Typically bypassed with a 1uF capacitor to GND. |+| 2 | CHRG | output | Open-drain charge status output. Pulled low (~5mA sink) by an internal NMOS while charging; high-impedance when the charge cycle completes. Requires an external pull-up resistor (e.g. through an indicator LED). |+| 3 | NC | unconnected | No connection. Leave floating or tie to GND per PCB layout preference. |+| 4 | EN | input | Charge enable input, active low. Logic-low threshold <=0.4V enables charging; logic-high threshold >=1.4V disables the charger. |+| 5 | NC | unconnected | No connection. |+| 6 | GND | power_in | Device ground reference. Tie to system ground along with the exposed pad (pin 11). |+| 7 | NC | unconnected | No connection. |+| 8 | NC | unconnected | No connection. |+| 9 | ISET | input | Charge current program pin. Connect a 1% resistor RISET from this pin to GND to set the constant-current charge level per IBAT = 1700 * VISET / RISET (VISET=1V typical). Charge termination is detected when the ISET pin voltage falls below 100mV for tTERM. |+| 10 | BAT | power_out | Battery connection pin. Provides regulated 4.2V float voltage and up to 1A charge current to a single-cell Li-Ion/Li-Polymer battery. Typically bypassed with a 10uF capacitor. |+| 11 | GND | power_in | Exposed thermal pad on the bottom of the TDFN-10 package. Must be soldered to the PCB ground plane for proper electrical grounding and thermal dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | LOWPOWER |+| Package | TDFN-10-EP(3x3) |+| Category | PMIC |+| Pins | 11 |++## Ordering variants++- `LP28013SQVF`++## CAD (KiCad official)++- Symbol: `LP28013SQVF`+- Footprint: `Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm`+- 3D model: TDFN-10-EP(3x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [LOWPOWER datasheet](docs/lp28013sqvf-datasheet.pdf) (8 pp, sha256 `345852311f6ff987`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp28013sqvf-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lp28013sqvf",+ "version": "0.1.0",+ "type": "component",+ "description": "LOWPOWER Battery Management, TDFN-10-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "lp28013sqvf"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lp28013sqvf.kicad_sym",+ "lp28013sqvf.kicad_mod",+ "lp28013sqvf.glb",+ "lp28013sqvf.step",+ "lp28013sqvf.lbr",+ "docs/hero.png",+ "docs/lp28013sqvf-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}