← Commit history

lp28013hqvf-435: factory component page (tier=lcsc)

Ray ·9ba767499c · ·parent ad2563c
1 file changed +134−8
page.json+134−8
@@ -1,13 +1,144 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lp28013hqvf-435",+  "title": "LP28013HQVF-435",+  "brief": "LOWPOWER Battery Management, TDFN-10-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "LOWPOWER Battery Management, TDFN-10-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "lp28013hqvf-435"   ],+  "component": {+    "mpn": "LP28013HQVF-435",+    "manufacturer": "LOWPOWER",+    "package": "TDFN-10-EP(3x3)",+    "pin_count": 11,+    "category": "PMIC",+    "subcategory": "Battery Management",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2108271830_LOWPOWER-LP28013HQVF-435_C2890381.pdf",+    "parts": {+      "symbol": "lp28013hqvf-435.kicad_sym",+      "footprint": "lp28013hqvf-435.kicad_mod",+      "model_3d": "lp28013hqvf-435.glb",+      "model_3d_step": "lp28013hqvf-435.step",+      "lbr": "lp28013hqvf-435.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "IN",+        "type": "power_in",+        "description": "Input power source. Connect to a wall adapter (recommended 4.5V-5.8V, absolute max 36V). Requires 1uF decoupling capacitor; input OVP triggers at 6.3V and UVLO at 3.3V."+      },+      {+        "number": "2",+        "name": "CHRG",+        "type": "output",+        "description": "Open-drain charge status output. Pulled low by internal NMOS during charging (~5mA sink); goes high-impedance when charging completes. Requires external pull-up resistor (typ. 1k to VBAT for LED indicator)."+      },+      {+        "number": "3",+        "name": "PG",+        "type": "output",+        "description": "Open-drain power-good status output. Low indicates VUVLO < VIN < VOVP (3.3V-6.3V) and input above battery voltage; Hi-Z otherwise. Requires external pull-up resistor."+      },+      {+        "number": "4",+        "name": "EN",+        "type": "input",+        "description": "Charge enable input, active low. Logic-low (<0.4V) or floating enables the charger; logic-high (>1.4V) shuts down the IC."+      },+      {+        "number": "5",+        "name": "NTC",+        "type": "input",+        "description": "Negative Thermal Coefficient thermistor input for battery temperature sensing (LP28013HQVF variant). Biased with internal 48uA source; designed for 10k NTC (\u03b2=3370, e.g. SEMITEC 103AT-2). Implements JEITA thresholds at 0/10/60\u00b0C. Tie 10k to GND to disable NTC feature."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "System ground connection."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to GND."+      },+      {+        "number": "8",+        "name": "IBF",+        "type": "input",+        "description": "Charge termination current program. Connect a resistor RIBF from this pin to GND to set the termination (end-of-charge) current threshold: IBF = (RISET \u00d7 IBAT) / RIBF. A 10nF decoupling capacitor is typically added."+      },+      {+        "number": "9",+        "name": "ISET",+        "type": "input",+        "description": "Charge current program. Connect a 1% resistor (RISET) to GND to set the constant-current charge level: IBAT = (VISET \u00d7 1800)/RISET, where VISET \u2248 1V. RISET=1.8k \u2192 1A; RISET=3.6k \u2192 500mA."+      },+      {+        "number": "10",+        "name": "BAT",+        "type": "power_out",+        "description": "Battery output connection. Regulated float voltage 4.35V (\u00b11%) for the -435 variant. Requires a 10uF decoupling capacitor to GND. Sinks <1uA from battery when input supply is removed."+      },+      {+        "number": "11",+        "name": "GND",+        "type": "power_in",+        "description": "Exposed thermal pad on the bottom of the TDFN-10 package. Must be soldered to the PCB ground plane for proper thermal dissipation (\u03b8JA=65\u00b0C/W) and electrical grounding."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2108271830_LOWPOWER-LP28013HQVF-435_C2890381.pdf",+        "pages": 10,+        "sha256": "0218726a42d6f51e",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "LOWPOWER",+      "Package": "TDFN-10-EP(3x3)",+      "Category": "PMIC",+      "Pins": "11"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lp28013hqvf-435"+  ],+  "discovery_pitch": "LP28013HQVF-435 (LOWPOWER) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +156,5 @@     "docs/lp28013hqvf-435-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file