← Commit history
page.json+9−6@@ -56,7 +56,7 @@ "number": "5", "name": "NTC", "type": "input",- "description": "Negative Thermal Coefficient thermistor input for battery temperature sensing (LP28013HQVF variant). Biased with internal 48uA source; designed for 10k NTC (\u03b2=3370, e.g. SEMITEC 103AT-2). Implements JEITA thresholds at 0/10/60\u00b0C. Tie 10k to GND to disable NTC feature."+ "description": "Negative Thermal Coefficient thermistor input for battery temperature sensing (LP28013HQVF variant). Biased with internal 48uA source; designed for 10k NTC (β=3370, e.g. SEMITEC 103AT-2). Implements JEITA thresholds at 0/10/60°C. Tie 10k to GND to disable NTC feature." }, { "number": "6",@@ -74,25 +74,25 @@ "number": "8", "name": "IBF", "type": "input",- "description": "Charge termination current program. Connect a resistor RIBF from this pin to GND to set the termination (end-of-charge) current threshold: IBF = (RISET \u00d7 IBAT) / RIBF. A 10nF decoupling capacitor is typically added."+ "description": "Charge termination current program. Connect a resistor RIBF from this pin to GND to set the termination (end-of-charge) current threshold: IBF = (RISET × IBAT) / RIBF. A 10nF decoupling capacitor is typically added." }, { "number": "9", "name": "ISET", "type": "input",- "description": "Charge current program. Connect a 1% resistor (RISET) to GND to set the constant-current charge level: IBAT = (VISET \u00d7 1800)/RISET, where VISET \u2248 1V. RISET=1.8k \u2192 1A; RISET=3.6k \u2192 500mA."+ "description": "Charge current program. Connect a 1% resistor (RISET) to GND to set the constant-current charge level: IBAT = (VISET × 1800)/RISET, where VISET ≈ 1V. RISET=1.8k → 1A; RISET=3.6k → 500mA." }, { "number": "10", "name": "BAT", "type": "power_out",- "description": "Battery output connection. Regulated float voltage 4.35V (\u00b11%) for the -435 variant. Requires a 10uF decoupling capacitor to GND. Sinks <1uA from battery when input supply is removed."+ "description": "Battery output connection. Regulated float voltage 4.35V (±1%) for the -435 variant. Requires a 10uF decoupling capacitor to GND. Sinks <1uA from battery when input supply is removed." }, { "number": "11", "name": "GND", "type": "power_in",- "description": "Exposed thermal pad on the bottom of the TDFN-10 package. Must be soldered to the PCB ground plane for proper thermal dissipation (\u03b8JA=65\u00b0C/W) and electrical grounding."+ "description": "Exposed thermal pad on the bottom of the TDFN-10 package. Must be soldered to the PCB ground plane for proper thermal dissipation (θJA=65°C/W) and electrical grounding." } ], "provenance": {@@ -156,5 +156,8 @@ "docs/lp28013hqvf-435-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }