← Commit history

Initial commit: component/lp28013hqvf-435

Ray ·0345228c50 ·
2 files changed +88
README.mdadded+54
@@ -0,0 +1,54 @@+# LP28013HQVF-435++**LOWPOWER** · Battery Management · TDFN-10-EP(3x3)++LP28013HQVF-435 from LOWPOWER, in a TDFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Input power source. Connect to a wall adapter (recommended 4.5V-5.8V, absolute max 36V). Requires 1uF decoupling capacitor; input OVP triggers at 6.3V and UVLO at 3.3V. |+| 2 | CHRG | output | Open-drain charge status output. Pulled low by internal NMOS during charging (~5mA sink); goes high-impedance when charging completes. Requires external pull-up resistor (typ. 1k to VBAT for LED indicator). |+| 3 | PG | output | Open-drain power-good status output. Low indicates VUVLO < VIN < VOVP (3.3V-6.3V) and input above battery voltage; Hi-Z otherwise. Requires external pull-up resistor. |+| 4 | EN | input | Charge enable input, active low. Logic-low (<0.4V) or floating enables the charger; logic-high (>1.4V) shuts down the IC. |+| 5 | NTC | input | Negative Thermal Coefficient thermistor input for battery temperature sensing (LP28013HQVF variant). Biased with internal 48uA source; designed for 10k NTC (β=3370, e.g. SEMITEC 103AT-2). Implements JEITA thresholds at 0/10/60°C. Tie 10k to GND to disable NTC feature. |+| 6 | GND | power_in | System ground connection. |+| 7 | NC | unconnected | No internal connection. Leave floating or tie to GND. |+| 8 | IBF | input | Charge termination current program. Connect a resistor RIBF from this pin to GND to set the termination (end-of-charge) current threshold: IBF = (RISET × IBAT) / RIBF. A 10nF decoupling capacitor is typically added. |+| 9 | ISET | input | Charge current program. Connect a 1% resistor (RISET) to GND to set the constant-current charge level: IBAT = (VISET × 1800)/RISET, where VISET ≈ 1V. RISET=1.8k → 1A; RISET=3.6k → 500mA. |+| 10 | BAT | power_out | Battery output connection. Regulated float voltage 4.35V (±1%) for the -435 variant. Requires a 10uF decoupling capacitor to GND. Sinks <1uA from battery when input supply is removed. |+| 11 | GND | power_in | Exposed thermal pad on the bottom of the TDFN-10 package. Must be soldered to the PCB ground plane for proper thermal dissipation (θJA=65°C/W) and electrical grounding. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | LOWPOWER |+| Package | TDFN-10-EP(3x3) |+| Category | PMIC |+| Pins | 11 |++## Ordering variants++- `LP28013HQVF-435`+- `LP28013HQVF-435LP28013HQVF-44`+- `LP28013HQVF-435LP28013HTQVF`+- `LP28013HQVF-435LP28013HTQVF-435`+- `LP28013HQVF-435LP28013HTQVF-44`++## CAD (KiCad official)++- Symbol: `LP28013HQVF-435`+- Footprint: `Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm`+- 3D model: TDFN-10-EP(3x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [LOWPOWER datasheet](docs/lp28013hqvf-435-datasheet.pdf) (10 pp, sha256 `0218726a42d6f51e`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp28013hqvf-435-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lp28013hqvf-435",+  "version": "0.1.0",+  "type": "component",+  "description": "LOWPOWER Battery Management, TDFN-10-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "lp28013hqvf-435"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lp28013hqvf-435.kicad_sym",+    "lp28013hqvf-435.kicad_mod",+    "lp28013hqvf-435.glb",+    "lp28013hqvf-435.step",+    "lp28013hqvf-435.lbr",+    "docs/hero.png",+    "docs/lp28013hqvf-435-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file