← Commit history

lnk3206d-tl: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·74742a30c9 · ·parent cbc7b6a
1 file changed +68−1
page.json+68−1
@@ -33,5 +33,72 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "LNK3206D-TL",+    "manufacturer": "POWER INTEGRATIONS",+    "package": "SO-7",+    "pin_count": 7,+    "category": "AC-DC Controllers and Regulators",+    "parts": {+      "symbol": "lnk3206d-tl.kicad_sym",+      "footprint": "lnk3206d-tl.kicad_mod",+      "model_3d": "lnk3206d-tl-etched.glb",+      "model_3d_plain": "lnk3206d-tl.glb",+      "model_3d_step": "lnk3206d-tl-etched.step",+      "model_3d_step_plain": "lnk3206d-tl.step",+      "lbr": "lnk3206d-tl.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "BP/M",+        "type": "passive",+        "description": "BYPASS / MULTI-FUNCTION pin. Connection point for the external decoupling capacitor of the internally regulated 5.0 V (VBP) supply. Cap value selects current-limit mode (0.1 µF = standard IL; 1 µF = reduced IL for low-cost SMD chokes). Shunt-clamped at ~5.2 V (VBP(SHUNT)); injecting a current >IBPSD for 2-3 oscillator cycles triggers auto-restart, enabling an external OVP function."+      },+      {+        "number": "2",+        "name": "FB",+        "type": "input",+        "description": "FEEDBACK pin. During normal operation, MOSFET switching is inhibited on any cycle where current into FB exceeds IFB (~49 µA, referenced to ~2.0 V). Line/output overvoltage protection triggers auto-restart when current into FB exceeds IFBSD (~670 µA) for 2 consecutive switching cycles. Regulation is achieved by cycle skipping."+      },+      {+        "number": "4",+        "name": "S",+        "type": "power_in",+        "description": "SOURCE pin. Internal power-MOSFET source connection and the IC's ground/common reference for the BYPASS and FEEDBACK pins. Tie to the local ground plane / heatsinking copper; all four SOURCE pins (4, 5, 6, 7) are internally common and should all be soldered."+      },+      {+        "number": "5",+        "name": "S",+        "type": "power_in",+        "description": "SOURCE pin. Internally tied to the other SOURCE pins; provides IC ground and PCB heatsinking. Solder to a copper pour large enough to meet the thermal derating in the datasheet."+      },+      {+        "number": "6",+        "name": "S",+        "type": "power_in",+        "description": "SOURCE pin. Internally tied to the other SOURCE pins; provides IC ground and PCB heatsinking. Solder to a copper pour large enough to meet the thermal derating in the datasheet."+      },+      {+        "number": "7",+        "name": "S",+        "type": "power_in",+        "description": "SOURCE pin. Internally tied to the other SOURCE pins; provides IC ground and PCB heatsinking. Solder to a copper pour large enough to meet the thermal derating in the datasheet."+      },+      {+        "number": "8",+        "name": "D",+        "type": "power_in",+        "description": "DRAIN pin. Drain of the internal 725 V power MOSFET and the supply node used both for start-up and steady-state internal bias (a high-voltage switched current source charges the BYPASS capacitor from DRAIN whenever the MOSFET is off). Extended creepage to all other pins (pin 3 is omitted) for surge withstand."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}