← Commit history
lmt87dckr: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+56−1
page.json+56−1@@ -32,5 +32,60 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LMT87DCKR",+ "manufacturer": "Texas Instruments",+ "package": "SC-70-5",+ "pin_count": 5,+ "category": "Temperature Sensors",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lmt87.pdf",+ "parts": {+ "symbol": "lmt87dckr.kicad_sym",+ "footprint": "lmt87dckr.kicad_mod",+ "model_3d": "lmt87dckr-etched.glb",+ "model_3d_step": "lmt87dckr-etched.step",+ "model_3d_step_plain": "lmt87dckr.step",+ "lbr": "lmt87dckr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply voltage. Operating range 2.7 V to 5.5 V (absolute max 6 V). Quiescent current is typically 5.4 μA. Bypass with a ceramic capacitor near the pin."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Power supply ground. This pin has a direct connection to the back side of the die, so it should be tied to the system ground/thermal reference."+ },+ {+ "number": "3",+ "name": "OUT",+ "type": "output",+ "description": "Analog output. Outputs a voltage that is inversely proportional to temperature with an average slope of -13.6 mV/°C. Class-AB push-pull output can source/sink up to ±50 μA and is short-circuit protected. Output voltage range approximately 0.2 V to 3.3 V over the -50°C to 150°C temperature range."+ },+ {+ "number": "4",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply voltage (internally connected to pin 1 and pin 5). Tie to VDD or leave to be handled by the pin 1 connection."+ },+ {+ "number": "5",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply voltage (internally connected to pin 1 and pin 4). Tie to VDD or leave to be handled by the pin 1 connection."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}