← Commit history

Initial commit: component/lmp90100mhx

Ray ·1412bef8d7 ·
2 files changed +335
README.mdadded+66
@@ -0,0 +1,66 @@+# LMP90100MHX++**Texas Instruments** · Analog Front End (AFE) · HTSSOP-28++LMP90100MHX from Texas Instruments, in a HTSSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VA | power_in | Analog power supply pin, voltage range 2.85V to 5.5V. |+| 2 | VIN0 | input | Analog input pin, can be configured as differential input positive or single-ended input. |+| 3 | VIN1 | input | Analog input pin, can be configured as differential input or reference. |+| 4 | VIN2 | input | Analog input pin, can be configured as differential input or reference. |+| 5 | VIN3 | input | Analog input pin, available for LMP90100 and LMP90099 only. |+| 6 | VIN4 | input | Analog input pin, available for LMP90100 and LMP90099 only. |+| 7 | VIN5 | input | Analog input pin, available for LMP90100 and LMP90099 only. |+| 8 | VREFP1 | input | Positive reference input for first reference pair, voltage range 0.5V to VA. |+| 9 | VREFN1 | input | Negative reference input for first reference pair, voltage range GND to 0.5V below VREFP1. |+| 10 | VIN6/VREFP2 | input | Analog input pin or positive reference input for second reference pair, configurable per channel. |+| 11 | VIN7/VREFN2 | input | Analog input pin or negative reference input for second reference pair, configurable per channel. |+| 12 | IB2 | output | Excitation current source output, 100µA to 1000µA in 100µA steps, LMP90100/LMP90098 only. |+| 13 | IB1 | output | Excitation current source output, 100µA to 1000µA in 100µA steps, LMP90100/LMP90098 only. |+| 14 | XOUT | output | External crystal oscillator output connection for 1.8MHz to 7.2MHz crystal. |+| 15 | XIN/CLK | input | External crystal oscillator input or external clock input, frequency range 1.8MHz to 7.2MHz. |+| 16 | GND | power_in | Power supply ground reference. |+| 17 | CSB | input | Chip select bar, active low SPI control signal, setup time 5ns before SCLK rising edge. |+| 18 | SCLK | input | Serial clock input for SPI interface, maximum frequency 10MHz. |+| 19 | SDI | input | Serial data input for SPI interface, setup time 5ns before SCLK rising edge. |+| 20 | SDO/DRDYB | output | Serial data output for SPI reads and multiplexed data ready bar signal indicating fresh conversion data. |+| 21 | D0 | bidirectional | General purpose input/output pin, configurable as input or output via GPIO_DIRCN register. |+| 22 | D1 | bidirectional | General purpose input/output pin, configurable as input or output via GPIO_DIRCN register. |+| 23 | D2 | bidirectional | General purpose input/output pin, configurable as input or output via GPIO_DIRCN register. |+| 24 | D3 | bidirectional | General purpose input/output pin, configurable as input or output via GPIO_DIRCN register. |+| 25 | D4 | bidirectional | General purpose input/output pin, configurable as input or output via GPIO_DIRCN register. |+| 26 | D5 | bidirectional | General purpose input/output pin, configurable as input or output via GPIO_DIRCN register. |+| 27 | D6/DRDYB | bidirectional | General purpose input/output pin or data ready bar output when SPI_DRDYB_D6 bit is set. |+| 28 | VIO | power_in | Digital input/output supply voltage, voltage range 2.7V to 5.5V. |+| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-28 |+| Category | Data Acquisition |+| Pins | 29 |++## CAD (KiCad official)++- Symbol: `LMP90100MHX`+- Footprint: `Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm`+- 3D model: HTSSOP-28 (KiCad packages3D, STEP)+- 3D model files: `lmp90100mhx-etched.step` / `lmp90100mhx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmp90100mhx.step` / `lmp90100mhx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmp90099) (75 pp, sha256 `5e1768e9d6941d7d`, retrieved 2026-09-18, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lmp90100mhx-datasheet.pdf)
page.jsonadded+269
@@ -0,0 +1,269 @@+{+  "slug": "lmp90100mhx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Analog Front End (AFE), HTSSOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "lmp90100mhx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lmp90100mhx.kicad_sym",+    "lmp90100mhx.kicad_mod",+    "lmp90100mhx.glb",+    "lmp90100mhx.step",+    "lmp90100mhx.lbr",+    "docs/hero.png",+    "docs/lmp90100mhx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LMP90100MHX",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-28",+    "pin_count": 29,+    "category": "Data Acquisition",+    "subcategory": "Analog Front End (AFE)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lmp90099",+    "parts": {+      "symbol": "lmp90100mhx.kicad_sym",+      "footprint": "lmp90100mhx.kicad_mod",+      "model_3d": "lmp90100mhx-etched.glb",+      "model_3d_plain": "lmp90100mhx.glb",+      "model_3d_step": "lmp90100mhx-etched.step",+      "model_3d_step_plain": "lmp90100mhx.step",+      "lbr": "lmp90100mhx.lbr"+    },+    "distributor_links": {+      "lcsc": "C2651594"+    },+    "pins": [+      {+        "number": "1",+        "name": "VA",+        "type": "power_in",+        "description": "Analog power supply pin, voltage range 2.85V to 5.5V."+      },+      {+        "number": "2",+        "name": "VIN0",+        "type": "input",+        "description": "Analog input pin, can be configured as differential input positive or single-ended input."+      },+      {+        "number": "3",+        "name": "VIN1",+        "type": "input",+        "description": "Analog input pin, can be configured as differential input or reference."+      },+      {+        "number": "4",+        "name": "VIN2",+        "type": "input",+        "description": "Analog input pin, can be configured as differential input or reference."+      },+      {+        "number": "5",+        "name": "VIN3",+        "type": "input",+        "description": "Analog input pin, available for LMP90100 and LMP90099 only."+      },+      {+        "number": "6",+        "name": "VIN4",+        "type": "input",+        "description": "Analog input pin, available for LMP90100 and LMP90099 only."+      },+      {+        "number": "7",+        "name": "VIN5",+        "type": "input",+        "description": "Analog input pin, available for LMP90100 and LMP90099 only."+      },+      {+        "number": "8",+        "name": "VREFP1",+        "type": "input",+        "description": "Positive reference input for first reference pair, voltage range 0.5V to VA."+      },+      {+        "number": "9",+        "name": "VREFN1",+        "type": "input",+        "description": "Negative reference input for first reference pair, voltage range GND to 0.5V below VREFP1."+      },+      {+        "number": "10",+        "name": "VIN6/VREFP2",+        "type": "input",+        "description": "Analog input pin or positive reference input for second reference pair, configurable per channel."+      },+      {+        "number": "11",+        "name": "VIN7/VREFN2",+        "type": "input",+        "description": "Analog input pin or negative reference input for second reference pair, configurable per channel."+      },+      {+        "number": "12",+        "name": "IB2",+        "type": "output",+        "description": "Excitation current source output, 100µA to 1000µA in 100µA steps, LMP90100/LMP90098 only."+      },+      {+        "number": "13",+        "name": "IB1",+        "type": "output",+        "description": "Excitation current source output, 100µA to 1000µA in 100µA steps, LMP90100/LMP90098 only."+      },+      {+        "number": "14",+        "name": "XOUT",+        "type": "output",+        "description": "External crystal oscillator output connection for 1.8MHz to 7.2MHz crystal."+      },+      {+        "number": "15",+        "name": "XIN/CLK",+        "type": "input",+        "description": "External crystal oscillator input or external clock input, frequency range 1.8MHz to 7.2MHz."+      },+      {+        "number": "16",+        "name": "GND",+        "type": "power_in",+        "description": "Power supply ground reference."+      },+      {+        "number": "17",+        "name": "CSB",+        "type": "input",+        "description": "Chip select bar, active low SPI control signal, setup time 5ns before SCLK rising edge."+      },+      {+        "number": "18",+        "name": "SCLK",+        "type": "input",+        "description": "Serial clock input for SPI interface, maximum frequency 10MHz."+      },+      {+        "number": "19",+        "name": "SDI",+        "type": "input",+        "description": "Serial data input for SPI interface, setup time 5ns before SCLK rising edge."+      },+      {+        "number": "20",+        "name": "SDO/DRDYB",+        "type": "output",+        "description": "Serial data output for SPI reads and multiplexed data ready bar signal indicating fresh conversion data."+      },+      {+        "number": "21",+        "name": "D0",+        "type": "bidirectional",+        "description": "General purpose input/output pin, configurable as input or output via GPIO_DIRCN register."+      },+      {+        "number": "22",+        "name": "D1",+        "type": "bidirectional",+        "description": "General purpose input/output pin, configurable as input or output via GPIO_DIRCN register."+      },+      {+        "number": "23",+        "name": "D2",+        "type": "bidirectional",+        "description": "General purpose input/output pin, configurable as input or output via GPIO_DIRCN register."+      },+      {+        "number": "24",+        "name": "D3",+        "type": "bidirectional",+        "description": "General purpose input/output pin, configurable as input or output via GPIO_DIRCN register."+      },+      {+        "number": "25",+        "name": "D4",+        "type": "bidirectional",+        "description": "General purpose input/output pin, configurable as input or output via GPIO_DIRCN register."+      },+      {+        "number": "26",+        "name": "D5",+        "type": "bidirectional",+        "description": "General purpose input/output pin, configurable as input or output via GPIO_DIRCN register."+      },+      {+        "number": "27",+        "name": "D6/DRDYB",+        "type": "bidirectional",+        "description": "General purpose input/output pin or data ready bar output when SPI_DRDYB_D6 bit is set."+      },+      {+        "number": "28",+        "name": "VIO",+        "type": "power_in",+        "description": "Digital input/output supply voltage, voltage range 2.7V to 5.5V."+      },+      {+        "number": "29",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 29 added from the footprint"+        ],+        "pages_sent": 75,+        "cost_usd": 0.618,+        "at": "2026-09-18T03:24:40"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lmp90099",+        "pages": 75,+        "sha256": "5e1768e9d6941d7d",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 29,+        "described": 29,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file