component
LMK05318RGZT
Public Made by Adomby adom
Texas Instruments Clock Generators, PLLs, Frequency Synthesizers, VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+86@@ -0,0 +1,86 @@+# LMK05318RGZT++**Texas Instruments** · Clock Generators, PLLs, Frequency Synthesizers · VQFN-48-EP(7x7)++LMK05318RGZT from Texas Instruments, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | STATUS0 | output | Programmable status output 0; configurable for device status and interrupt signals |+| 2 | STATUS1/FDEC | bidirectional | Status output 1 or DPLL DCO frequency decrement input in I2C mode |+| 3 | CAP_DIG | passive | External bypass capacitor for digital core LDO; recommend 10µF |+| 4 | VDD_DIG | power_in | 3.3V core power supply for digital block; bypass with 1µF capacitor |+| 5 | VDD_IN | power_in | 3.3V core power supply for PRIREF and SECREF inputs; bypass with 10µF capacitor |+| 6 | PRIREF_P | input | Primary reference clock differential input positive terminal, 5MHz to 800MHz |+| 7 | PRIREF_N | input | Primary reference clock differential input negative terminal, 5MHz to 800MHz |+| 8 | REFSEL | input | Manual DPLL reference input selection (3-level, 1.8V compatible); 0=PRIREF, 1=SECREF, floating=auto |+| 9 | HW_SW_CTRL | input | Device startup mode selection (3-level, 1.8V compatible); sampled during power-on reset |+| 10 | SECREF_P | input | Secondary reference clock differential input positive terminal, 5MHz to 800MHz |+| 11 | SECREF_N | input | Secondary reference clock differential input negative terminal, 5MHz to 800MHz |+| 12 | GPIO0/SYNCN | bidirectional | Output synchronization active-low input or programmable GPIO output |+| 13 | PDN | input | Device power down active-low input; pulling low disables all device blocks and serial interface |+| 14 | OUT0_P | output | Clock output 0 positive; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz |+| 15 | OUT0_N | output | Clock output 0 negative; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz |+| 16 | OUT1_N | output | Clock output 1 negative; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz |+| 17 | OUT1_P | output | Clock output 1 positive; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz |+| 18 | VDDO_01 | power_in | Output power supply for OUT0-OUT3 (1.8V/2.5V/3.3V); bypass with 0.1µF capacitor |+| 19 | VDDO_23 | power_in | Output power supply for OUT0-OUT3 (1.8V/2.5V/3.3V); bypass with 0.1µF capacitor |+| 20 | OUT2_P | output | Clock output 2 positive; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz |+| 21 | OUT2_N | output | Clock output 2 negative; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz |+| 22 | OUT3_N | output | Clock output 3 negative; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz |+| 23 | OUT3_P | output | Clock output 3 positive; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz |+| 24 | GPIO1/SCS | input | I2C address LSB select (3-level) sampled on power-on reset or SPI chip select in SPI mode |+| 25 | SDA/SDI | bidirectional | I2C serial data open-drain I/O or SPI serial data input selected by HW_SW_CTRL mode |+| 26 | SCL/SCK | input | I2C serial clock open-drain input or SPI serial clock input selected by HW_SW_CTRL mode |+| 27 | VDD_PLL1 | power_in | 3.3V core power supply for APLL1, APLL2, and digital block; bypass with 10µF capacitor |+| 28 | CAP_PLL1 | passive | External bypass capacitor for APLL1 LDO regulator; recommend 10µF |+| 29 | LF1 | passive | External loop filter capacitor for APLL1; recommend 0.47µF for 1.0kHz loop bandwidth |+| 30 | GPIO2/SDO/FINC | bidirectional | SPI serial data output or DPLL DCO frequency increment input in pin control mode |+| 31 | XO_P | input | Oscillator input positive terminal; 10MHz to 100MHz differential or single-ended signal |+| 32 | XO_N | input | Oscillator input negative terminal; 10MHz to 100MHz differential or single-ended signal |+| 33 | VDD_XO | power_in | 3.3V core power supply for XO input; bypass with 10µF capacitor |+| 34 | LF2 | passive | External loop filter capacitor for APLL2; recommend 0.1µF for 500kHz loop bandwidth |+| 35 | CAP_PLL2 | passive | External bypass capacitor for APLL2 LDO regulator; recommend 10µF |+| 36 | VDD_PLL2 | power_in | 3.3V core power supply for APLL2; bypass with 10µF capacitor |+| 37 | VDDO_4 | power_in | Output power supply for OUT4-OUT7 (1.8V/2.5V/3.3V); bypass with 0.1µF capacitor |+| 38 | OUT4_N | output | Clock output 4 negative; differential/HCSL (2MHz-800MHz) or 1.8V LVCMOS format |+| 39 | OUT4_P | output | Clock output 4 positive; differential/HCSL (2MHz-800MHz) or 1.8V LVCMOS format |+| 40 | VDDO_5 | power_in | Output power supply for OUT4-OUT7 (1.8V/2.5V/3.3V); bypass with 0.1µF capacitor |+| 41 | OUT5_N | output | Clock output 5 negative; differential/HCSL (2MHz-800MHz) or 1.8V LVCMOS format |+| 42 | OUT5_P | output | Clock output 5 positive; differential/HCSL (2MHz-800MHz) or 1.8V LVCMOS format |+| 43 | VDDO_6 | power_in | Output power supply for OUT4-OUT7 (1.8V/2.5V/3.3V); bypass with 0.1µF capacitor |+| 44 | OUT6_N | output | Clock output 6 negative; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz |+| 45 | OUT6_P | output | Clock output 6 positive; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz |+| 46 | VDDO_7 | power_in | Output power supply for OUT4-OUT7 (1.8V/2.5V/3.3V); bypass with 0.1µF capacitor |+| 47 | OUT7_N | output | Clock output 7 negative; differential/HCSL (2MHz-800MHz) or 1.8V LVCMOS format |+| 48 | OUT7_P | output | Clock output 7 positive; differential/HCSL (2MHz-800MHz) or 1.8V LVCMOS format |+| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-48-EP(7x7) |+| Category | Clock/Timing |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `LMK05318RGZT`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)+- 3D model files: `lmk05318rgzt-etched.step` / `lmk05318rgzt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmk05318rgzt.step` / `lmk05318rgzt.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmk05318) (83 pp, sha256 `72f9aafb7d60fe72`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lmk05318rgzt-datasheet.pdf)
page.jsonadded+390@@ -0,0 +1,390 @@+{+ "slug": "lmk05318rgzt",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Clock Generators, PLLs, Frequency Synthesizers, VQFN-48-EP(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "clock-timing",+ "lmk05318rgzt",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lmk05318rgzt.kicad_sym",+ "lmk05318rgzt.kicad_mod",+ "lmk05318rgzt.glb",+ "lmk05318rgzt.step",+ "lmk05318rgzt.lbr",+ "docs/hero.png",+ "docs/lmk05318rgzt-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LMK05318RGZT",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-48-EP(7x7)",+ "pin_count": 49,+ "category": "Clock/Timing",+ "subcategory": "Clock Generators, PLLs, Frequency Synthesizers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lmk05318",+ "parts": {+ "symbol": "lmk05318rgzt.kicad_sym",+ "footprint": "lmk05318rgzt.kicad_mod",+ "model_3d": "lmk05318rgzt-etched.glb",+ "model_3d_plain": "lmk05318rgzt.glb",+ "model_3d_step": "lmk05318rgzt-etched.step",+ "model_3d_step_plain": "lmk05318rgzt.step",+ "lbr": "lmk05318rgzt.lbr"+ },+ "distributor_links": {+ "lcsc": "C2662714"+ },+ "pins": [+ {+ "number": "1",+ "name": "STATUS0",+ "type": "output",+ "description": "Programmable status output 0; configurable for device status and interrupt signals"+ },+ {+ "number": "2",+ "name": "STATUS1/FDEC",+ "type": "bidirectional",+ "description": "Status output 1 or DPLL DCO frequency decrement input in I2C mode"+ },+ {+ "number": "3",+ "name": "CAP_DIG",+ "type": "passive",+ "description": "External bypass capacitor for digital core LDO; recommend 10µF"+ },+ {+ "number": "4",+ "name": "VDD_DIG",+ "type": "power_in",+ "description": "3.3V core power supply for digital block; bypass with 1µF capacitor"+ },+ {+ "number": "5",+ "name": "VDD_IN",+ "type": "power_in",+ "description": "3.3V core power supply for PRIREF and SECREF inputs; bypass with 10µF capacitor"+ },+ {+ "number": "6",+ "name": "PRIREF_P",+ "type": "input",+ "description": "Primary reference clock differential input positive terminal, 5MHz to 800MHz"+ },+ {+ "number": "7",+ "name": "PRIREF_N",+ "type": "input",+ "description": "Primary reference clock differential input negative terminal, 5MHz to 800MHz"+ },+ {+ "number": "8",+ "name": "REFSEL",+ "type": "input",+ "description": "Manual DPLL reference input selection (3-level, 1.8V compatible); 0=PRIREF, 1=SECREF, floating=auto"+ },+ {+ "number": "9",+ "name": "HW_SW_CTRL",+ "type": "input",+ "description": "Device startup mode selection (3-level, 1.8V compatible); sampled during power-on reset"+ },+ {+ "number": "10",+ "name": "SECREF_P",+ "type": "input",+ "description": "Secondary reference clock differential input positive terminal, 5MHz to 800MHz"+ },+ {+ "number": "11",+ "name": "SECREF_N",+ "type": "input",+ "description": "Secondary reference clock differential input negative terminal, 5MHz to 800MHz"+ },+ {+ "number": "12",+ "name": "GPIO0/SYNCN",+ "type": "bidirectional",+ "description": "Output synchronization active-low input or programmable GPIO output"+ },+ {+ "number": "13",+ "name": "PDN",+ "type": "input",+ "description": "Device power down active-low input; pulling low disables all device blocks and serial interface"+ },+ {+ "number": "14",+ "name": "OUT0_P",+ "type": "output",+ "description": "Clock output 0 positive; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz"+ },+ {+ "number": "15",+ "name": "OUT0_N",+ "type": "output",+ "description": "Clock output 0 negative; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz"+ },+ {+ "number": "16",+ "name": "OUT1_N",+ "type": "output",+ "description": "Clock output 1 negative; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz"+ },+ {+ "number": "17",+ "name": "OUT1_P",+ "type": "output",+ "description": "Clock output 1 positive; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz"+ },+ {+ "number": "18",+ "name": "VDDO_01",+ "type": "power_in",+ "description": "Output power supply for OUT0-OUT3 (1.8V/2.5V/3.3V); bypass with 0.1µF capacitor"+ },+ {+ "number": "19",+ "name": "VDDO_23",+ "type": "power_in",+ "description": "Output power supply for OUT0-OUT3 (1.8V/2.5V/3.3V); bypass with 0.1µF capacitor"+ },+ {+ "number": "20",+ "name": "OUT2_P",+ "type": "output",+ "description": "Clock output 2 positive; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz"+ },+ {+ "number": "21",+ "name": "OUT2_N",+ "type": "output",+ "description": "Clock output 2 negative; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz"+ },+ {+ "number": "22",+ "name": "OUT3_N",+ "type": "output",+ "description": "Clock output 3 negative; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz"+ },+ {+ "number": "23",+ "name": "OUT3_P",+ "type": "output",+ "description": "Clock output 3 positive; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz"+ },+ {+ "number": "24",+ "name": "GPIO1/SCS",+ "type": "input",+ "description": "I2C address LSB select (3-level) sampled on power-on reset or SPI chip select in SPI mode"+ },+ {+ "number": "25",+ "name": "SDA/SDI",+ "type": "bidirectional",+ "description": "I2C serial data open-drain I/O or SPI serial data input selected by HW_SW_CTRL mode"+ },+ {+ "number": "26",+ "name": "SCL/SCK",+ "type": "input",+ "description": "I2C serial clock open-drain input or SPI serial clock input selected by HW_SW_CTRL mode"+ },+ {+ "number": "27",+ "name": "VDD_PLL1",+ "type": "power_in",+ "description": "3.3V core power supply for APLL1, APLL2, and digital block; bypass with 10µF capacitor"+ },+ {+ "number": "28",+ "name": "CAP_PLL1",+ "type": "passive",+ "description": "External bypass capacitor for APLL1 LDO regulator; recommend 10µF"+ },+ {+ "number": "29",+ "name": "LF1",+ "type": "passive",+ "description": "External loop filter capacitor for APLL1; recommend 0.47µF for 1.0kHz loop bandwidth"+ },+ {+ "number": "30",+ "name": "GPIO2/SDO/FINC",+ "type": "bidirectional",+ "description": "SPI serial data output or DPLL DCO frequency increment input in pin control mode"+ },+ {+ "number": "31",+ "name": "XO_P",+ "type": "input",+ "description": "Oscillator input positive terminal; 10MHz to 100MHz differential or single-ended signal"+ },+ {+ "number": "32",+ "name": "XO_N",+ "type": "input",+ "description": "Oscillator input negative terminal; 10MHz to 100MHz differential or single-ended signal"+ },+ {+ "number": "33",+ "name": "VDD_XO",+ "type": "power_in",+ "description": "3.3V core power supply for XO input; bypass with 10µF capacitor"+ },+ {+ "number": "34",+ "name": "LF2",+ "type": "passive",+ "description": "External loop filter capacitor for APLL2; recommend 0.1µF for 500kHz loop bandwidth"+ },+ {+ "number": "35",+ "name": "CAP_PLL2",+ "type": "passive",+ "description": "External bypass capacitor for APLL2 LDO regulator; recommend 10µF"+ },+ {+ "number": "36",+ "name": "VDD_PLL2",+ "type": "power_in",+ "description": "3.3V core power supply for APLL2; bypass with 10µF capacitor"+ },+ {+ "number": "37",+ "name": "VDDO_4",+ "type": "power_in",+ "description": "Output power supply for OUT4-OUT7 (1.8V/2.5V/3.3V); bypass with 0.1µF capacitor"+ },+ {+ "number": "38",+ "name": "OUT4_N",+ "type": "output",+ "description": "Clock output 4 negative; differential/HCSL (2MHz-800MHz) or 1.8V LVCMOS format"+ },+ {+ "number": "39",+ "name": "OUT4_P",+ "type": "output",+ "description": "Clock output 4 positive; differential/HCSL (2MHz-800MHz) or 1.8V LVCMOS format"+ },+ {+ "number": "40",+ "name": "VDDO_5",+ "type": "power_in",+ "description": "Output power supply for OUT4-OUT7 (1.8V/2.5V/3.3V); bypass with 0.1µF capacitor"+ },+ {+ "number": "41",+ "name": "OUT5_N",+ "type": "output",+ "description": "Clock output 5 negative; differential/HCSL (2MHz-800MHz) or 1.8V LVCMOS format"+ },+ {+ "number": "42",+ "name": "OUT5_P",+ "type": "output",+ "description": "Clock output 5 positive; differential/HCSL (2MHz-800MHz) or 1.8V LVCMOS format"+ },+ {+ "number": "43",+ "name": "VDDO_6",+ "type": "power_in",+ "description": "Output power supply for OUT4-OUT7 (1.8V/2.5V/3.3V); bypass with 0.1µF capacitor"+ },+ {+ "number": "44",+ "name": "OUT6_N",+ "type": "output",+ "description": "Clock output 6 negative; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz"+ },+ {+ "number": "45",+ "name": "OUT6_P",+ "type": "output",+ "description": "Clock output 6 positive; AC-LVDS/CML/LVPECL/HCSL format, 2MHz to 800MHz"+ },+ {+ "number": "46",+ "name": "VDDO_7",+ "type": "power_in",+ "description": "Output power supply for OUT4-OUT7 (1.8V/2.5V/3.3V); bypass with 0.1µF capacitor"+ },+ {+ "number": "47",+ "name": "OUT7_N",+ "type": "output",+ "description": "Clock output 7 negative; differential/HCSL (2MHz-800MHz) or 1.8V LVCMOS format"+ },+ {+ "number": "48",+ "name": "OUT7_P",+ "type": "output",+ "description": "Clock output 7 positive; differential/HCSL (2MHz-800MHz) or 1.8V LVCMOS format"+ },+ {+ "number": "49",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 49 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 83,+ "cost_usd": 1.1383,+ "at": "2026-09-22T10:26:48"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lmk05318",+ "pages": 83,+ "sha256": "72f9aafb7d60fe72",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 49,+ "described": 49,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}