component
LMK01010ISQE
Public Made by Adomby adom
Texas Instruments Clock Buffers, Drivers, Distributors, WQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+85@@ -0,0 +1,85 @@+# LMK01010ISQE++**Texas Instruments** · Clock Buffers, Drivers, Distributors · WQFN-48-EP(7x7)++LMK01010ISQE from Texas Instruments, in a WQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground pin; the device ground connection. |+| 2 | NC | unconnected | No connect; pin is not connected to the die. |+| 3 | Vcc1 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 4 | CLKuWire | input | MICROWIRE clock input for device register programming. |+| 5 | DATAuWire | input | MICROWIRE data input for device register programming. |+| 6 | LEuWire | input | MICROWIRE latch enable input for device register programming. |+| 7 | NC | unconnected | No connect; pin is not connected to the die. |+| 8 | Vcc2 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 9 | NC | unconnected | No connect; pin is not connected to the die. |+| 10 | NC | unconnected | No connect; pin is not connected to the die. |+| 11 | GOE | input | Global output enable input. |+| 12 | Test | output | Test output for test purposes only; should be not connected in normal operation, though any load above 1 kΩ impedance is acceptable. |+| 13 | Vcc3 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 14 | CLKout0 | output | True clock output 0; LVDS on the LMK01010 per the device configuration table. |+| 15 | CLKout0* | output | Complementary clock output 0; LVDS on the LMK01010 per the device configuration table. |+| 16 | Vcc4 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 17 | CLKout1 | output | True clock output 1; LVDS on the LMK01010 per the device configuration table. |+| 18 | CLKout1* | output | Complementary clock output 1; LVDS on the LMK01010 per the device configuration table. |+| 19 | Vcc5 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 20 | CLKout2 | output | True clock output 2; LVDS on the LMK01010 per the device configuration table. |+| 21 | CLKout2* | output | Complementary clock output 2; LVDS on the LMK01010 per the device configuration table. |+| 22 | Vcc6 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 23 | CLKout3 | output | True clock output 3; LVDS on the LMK01010 per the device configuration table. |+| 24 | CLKout3* | output | Complementary clock output 3; LVDS on the LMK01010 per the device configuration table. |+| 25 | GND | power_in | Ground pin; the device ground connection. |+| 26 | Vcc7 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 27 | SYNC* | input | Global clock output synchronization input used to synchronize the outputs by an external pin. |+| 28 | CLKin0 | input | True clock input 0; must be AC coupled. |+| 29 | CLKin0* | input | Complementary clock input 0; must be AC coupled. |+| 30 | Vcc8 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 31 | Vcc9 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 32 | NC | unconnected | No connect; pin is not connected to the die. |+| 33 | Vcc10 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 34 | CLKin1 | input | True clock input 1; must be AC coupled. |+| 35 | CLKin1* | input | Complementary clock input 1; must be AC coupled. |+| 36 | Bias | passive | Bias bypass pin for the internal bias circuit. |+| 37 | Vcc11 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 38 | CLKout4 | output | True clock output 4; LVDS on the LMK01010 per the device configuration table. |+| 39 | CLKout4* | output | Complementary clock output 4; LVDS on the LMK01010 per the device configuration table. |+| 40 | Vcc12 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 41 | CLKout5 | output | True clock output 5; LVDS on the LMK01010 per the device configuration table. |+| 42 | CLKout5* | output | Complementary clock output 5; LVDS on the LMK01010 per the device configuration table. |+| 43 | Vcc13 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 44 | CLKout6 | output | True clock output 6; LVDS on the LMK01010 per the device configuration table. |+| 45 | CLKout6* | output | Complementary clock output 6; LVDS on the LMK01010 per the device configuration table. |+| 46 | Vcc14 | power_in | Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions. |+| 47 | CLKout7 | output | True clock output 7; LVDS on the LMK01010 per the device configuration table. |+| 48 | CLKout7* | output | Complementary clock output 7; LVDS on the LMK01010 per the device configuration table. |+| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-48-EP(7x7) |+| Category | Clock/Timing |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `LMK01010ISQE`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: WQFN-48-EP(7x7) (KiCad packages3D, STEP)+- 3D model files: `lmk01010isqe-etched.step` / `lmk01010isqe-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmk01010isqe.step` / `lmk01010isqe.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmk01020) (28 pp, sha256 `8f668476c4ca1696`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lmk01010isqe-datasheet.pdf)
page.jsonadded+445@@ -0,0 +1,445 @@+{+ "slug": "lmk01010isqe",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Clock Buffers, Drivers, Distributors, WQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "clock-timing",+ "lmk01010isqe",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lmk01010isqe.kicad_sym",+ "lmk01010isqe.kicad_mod",+ "lmk01010isqe.glb",+ "lmk01010isqe.step",+ "lmk01010isqe.lbr",+ "docs/hero.png",+ "docs/lmk01010isqe-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lmk01010isqe-hero.glb",+ "lmk01010isqe-hero.overlay.json"+ ],+ "component": {+ "mpn": "LMK01010ISQE",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-48-EP(7x7)",+ "pin_count": 49,+ "category": "Clock/Timing",+ "subcategory": "Clock Buffers, Drivers, Distributors",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lmk01020",+ "parts": {+ "symbol": "lmk01010isqe.kicad_sym",+ "footprint": "lmk01010isqe.kicad_mod",+ "model_3d": "lmk01010isqe-hero.glb",+ "model_3d_plain": "lmk01010isqe.glb",+ "model_3d_step": "lmk01010isqe-etched.step",+ "model_3d_step_plain": "lmk01010isqe.step",+ "lbr": "lmk01010isqe.lbr"+ },+ "distributor_links": {+ "lcsc": "C2876344"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T19:43:43Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin; the device ground connection."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; pin is not connected to the die."+ },+ {+ "number": "3",+ "name": "Vcc1",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "4",+ "name": "CLKuWire",+ "type": "input",+ "description": "MICROWIRE clock input for device register programming."+ },+ {+ "number": "5",+ "name": "DATAuWire",+ "type": "input",+ "description": "MICROWIRE data input for device register programming."+ },+ {+ "number": "6",+ "name": "LEuWire",+ "type": "input",+ "description": "MICROWIRE latch enable input for device register programming."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; pin is not connected to the die."+ },+ {+ "number": "8",+ "name": "Vcc2",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "9",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; pin is not connected to the die."+ },+ {+ "number": "10",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; pin is not connected to the die."+ },+ {+ "number": "11",+ "name": "GOE",+ "type": "input",+ "description": "Global output enable input."+ },+ {+ "number": "12",+ "name": "Test",+ "type": "output",+ "description": "Test output for test purposes only; should be not connected in normal operation, though any load above 1 kΩ impedance is acceptable."+ },+ {+ "number": "13",+ "name": "Vcc3",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "14",+ "name": "CLKout0",+ "type": "output",+ "description": "True clock output 0; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "15",+ "name": "CLKout0*",+ "type": "output",+ "description": "Complementary clock output 0; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "16",+ "name": "Vcc4",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "17",+ "name": "CLKout1",+ "type": "output",+ "description": "True clock output 1; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "18",+ "name": "CLKout1*",+ "type": "output",+ "description": "Complementary clock output 1; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "19",+ "name": "Vcc5",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "20",+ "name": "CLKout2",+ "type": "output",+ "description": "True clock output 2; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "21",+ "name": "CLKout2*",+ "type": "output",+ "description": "Complementary clock output 2; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "22",+ "name": "Vcc6",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "23",+ "name": "CLKout3",+ "type": "output",+ "description": "True clock output 3; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "24",+ "name": "CLKout3*",+ "type": "output",+ "description": "Complementary clock output 3; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "25",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin; the device ground connection."+ },+ {+ "number": "26",+ "name": "Vcc7",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "27",+ "name": "SYNC*",+ "type": "input",+ "description": "Global clock output synchronization input used to synchronize the outputs by an external pin."+ },+ {+ "number": "28",+ "name": "CLKin0",+ "type": "input",+ "description": "True clock input 0; must be AC coupled."+ },+ {+ "number": "29",+ "name": "CLKin0*",+ "type": "input",+ "description": "Complementary clock input 0; must be AC coupled."+ },+ {+ "number": "30",+ "name": "Vcc8",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "31",+ "name": "Vcc9",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "32",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; pin is not connected to the die."+ },+ {+ "number": "33",+ "name": "Vcc10",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "34",+ "name": "CLKin1",+ "type": "input",+ "description": "True clock input 1; must be AC coupled."+ },+ {+ "number": "35",+ "name": "CLKin1*",+ "type": "input",+ "description": "Complementary clock input 1; must be AC coupled."+ },+ {+ "number": "36",+ "name": "Bias",+ "type": "passive",+ "description": "Bias bypass pin for the internal bias circuit."+ },+ {+ "number": "37",+ "name": "Vcc11",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "38",+ "name": "CLKout4",+ "type": "output",+ "description": "True clock output 4; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "39",+ "name": "CLKout4*",+ "type": "output",+ "description": "Complementary clock output 4; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "40",+ "name": "Vcc12",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "41",+ "name": "CLKout5",+ "type": "output",+ "description": "True clock output 5; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "42",+ "name": "CLKout5*",+ "type": "output",+ "description": "Complementary clock output 5; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "43",+ "name": "Vcc13",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "44",+ "name": "CLKout6",+ "type": "output",+ "description": "True clock output 6; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "45",+ "name": "CLKout6*",+ "type": "output",+ "description": "Complementary clock output 6; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "46",+ "name": "Vcc14",+ "type": "power_in",+ "description": "Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical) per the recommended operating conditions."+ },+ {+ "number": "47",+ "name": "CLKout7",+ "type": "output",+ "description": "True clock output 7; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "48",+ "name": "CLKout7*",+ "type": "output",+ "description": "Complementary clock output 7; LVDS on the LMK01010 per the device configuration table."+ },+ {+ "number": "49",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The pin table prints the MICROWIRE pin as 'CLKuWire', 'DATAuWire' and 'LEuWire' (the 'u' appears to ; The exposed die attach pad is listed as 'DAP' rather than a numbered pin. It is included with that i; Pin 36 'Bias' is listed as type I in the datasheet, but it is a bias bypass node, so it is typed pas",+ "exposed pad 49 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 9,+ "cost_usd": 0.084,+ "at": "2026-10-08T19:43:01"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lmk01020",+ "pages": 28,+ "sha256": "8f668476c4ca1696",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 49,+ "described": 49,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lmk01010isqe.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7,+ 7,+ 0.77+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "f2b38b0b4bf967c77e683e8d4599608b9f0503055ec535b93c4ebb5d0163e916",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lmk01010isqe-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7,+ 7,+ 0.77+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "cb397e1a1e28f18a15236e36c616cb56ab86f6ebfcaeb2bee72e1feadcd97741",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}