component
LMH1219RTWR
Public Made by Adomby adom
Texas Instruments Video Interface ICs, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+61@@ -0,0 +1,61 @@+# LMH1219RTWR++**Texas Instruments** · Video Interface ICs · WQFN-24-EP(4x4)++LMH1219RTWR from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN0+ | input | 75-Ω single-ended complementary input for adaptive cable equalizer with internal termination and return loss compensation network; requires external 4.7-µF AC coupling capacitor. |+| 2 | IN0- | input | 75-Ω complementary input for adaptive cable equalizer with internal termination to internal common mode voltage; requires external 4.7-µF AC coupling capacitor. |+| 3 | VSS | power_in | Ground reference. |+| 4 | IN1+ | input | Differential complementary input with internal 100-Ω termination for PCB trace signals; requires external 4.7-µF AC coupling capacitor. |+| 5 | IN1- | input | Differential complementary input with internal 100-Ω termination for PCB trace signals; requires external 4.7-µF AC coupling capacitor. |+| 6 | MODE_SEL | input | 4-level control pin to select SPI (float) or SMBus (1 kΩ to VSS) serial interface mode; setting is read at power-up. |+| 7 | SS_N_ADDR0 | input | Functions as SPI Slave Select active-low LVCMOS input or as 4-level SMBus address strap read at power-up. |+| 8 | IN_OUT_SEL | input | 4-level control pin selecting signal flow from IN0 or IN1 inputs to outputs; overridable by register control. |+| 9 | VSS | power_in | Ground reference. |+| 10 | MOSI_SDA | bidirectional | Functions as SPI master-output-slave-input LVCMOS input or as SMBus open-drain bidirectional data line (SDA) requiring 2-5 kΩ external pull-up to 3.6 V. |+| 11 | VOD_DE | input | 4-level control pin selecting output driver amplitude and de-emphasis level for OUT0 and OUT1 outputs; overridable by register control. |+| 12 | LOCK_N | tri_state | 3.3 V tolerant open-drain active-low output indicating reclocker lock status, carrier detect, or interrupts; requires 2-5 kΩ external pull-up resistor to logic supply. |+| 13 | VDD_CDR | power_in | 2.5 V ± 5% power supply for reclocker circuitry. |+| 14 | OUT1- | output | Differential complementary analog output with 100-Ω internal termination; requires external 4.7-µF AC coupling capacitor. |+| 15 | OUT1+ | output | Differential analog output with 100-Ω internal termination; requires external 4.7-µF AC coupling capacitor. |+| 16 | VSS | power_in | Ground reference. |+| 17 | OUT0- | output | Differential complementary analog output with 100-Ω internal termination; requires external 4.7-µF AC coupling capacitor. |+| 18 | OUT0+ | output | Differential analog output with 100-Ω internal termination; requires external 4.7-µF AC coupling capacitor. |+| 19 | OUT_CTRL | input | 4-level control pin selecting output signal flow (raw data, recovered data, clock, or equalized data); overridable by register control. |+| 20 | MISO_ADDR1 | tri_state | Functions as SPI master-input-slave-output LVCMOS tristatable output or as 4-level SMBus address strap read at power-up. |+| 21 | SCK_SCL | input | Functions as SPI serial clock input LVCMOS or as SMBus open-drain clock input tolerant to 3.3 V; requires 2-5 kΩ external pull-up resistor. |+| 22 | VDDIO | power_in | 2.5 V ± 5% power supply for LVCMOS I/O and 4-level input logic. |+| 23 | VDD_LDO | bidirectional | Output of internal 1.8 V LDO regulator when VIN = 2.5 V (requires 1-µF and 0.1-µF bypass capacitors), or input when VIN = 1.8 V for lower power dual-supply operation. |+| 24 | VIN | power_in | Power supply input accepting 2.5 V ± 5% (with internal LDO generating VDD_LDO) or 1.8 V ± 5% (dual-supply mode). |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-24-EP(4x4) |+| Category | Interface |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `LMH1219RTWR`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmh1219) (58 pp, sha256 `a85c764d93e9de34`, retrieved 2026-09-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lmh1219rtwr-datasheet.pdf)
page.jsonadded+243@@ -0,0 +1,243 @@+{+ "slug": "lmh1219rtwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Video Interface ICs, WQFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "lmh1219rtwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lmh1219rtwr.kicad_sym",+ "lmh1219rtwr.kicad_mod",+ "lmh1219rtwr.glb",+ "lmh1219rtwr.step",+ "lmh1219rtwr.lbr",+ "docs/hero.png",+ "docs/lmh1219rtwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LMH1219RTWR",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-24-EP(4x4)",+ "pin_count": 25,+ "category": "Interface",+ "subcategory": "Video Interface ICs",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lmh1219",+ "parts": {+ "symbol": "lmh1219rtwr.kicad_sym",+ "footprint": "lmh1219rtwr.kicad_mod",+ "model_3d": "lmh1219rtwr.glb",+ "model_3d_step": "lmh1219rtwr.step",+ "lbr": "lmh1219rtwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2869723"+ },+ "pins": [+ {+ "number": "1",+ "name": "IN0+",+ "type": "input",+ "description": "75-Ω single-ended complementary input for adaptive cable equalizer with internal termination and return loss compensation network; requires external 4.7-µF AC coupling capacitor."+ },+ {+ "number": "2",+ "name": "IN0-",+ "type": "input",+ "description": "75-Ω complementary input for adaptive cable equalizer with internal termination to internal common mode voltage; requires external 4.7-µF AC coupling capacitor."+ },+ {+ "number": "3",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference."+ },+ {+ "number": "4",+ "name": "IN1+",+ "type": "input",+ "description": "Differential complementary input with internal 100-Ω termination for PCB trace signals; requires external 4.7-µF AC coupling capacitor."+ },+ {+ "number": "5",+ "name": "IN1-",+ "type": "input",+ "description": "Differential complementary input with internal 100-Ω termination for PCB trace signals; requires external 4.7-µF AC coupling capacitor."+ },+ {+ "number": "6",+ "name": "MODE_SEL",+ "type": "input",+ "description": "4-level control pin to select SPI (float) or SMBus (1 kΩ to VSS) serial interface mode; setting is read at power-up."+ },+ {+ "number": "7",+ "name": "SS_N_ADDR0",+ "type": "input",+ "description": "Functions as SPI Slave Select active-low LVCMOS input or as 4-level SMBus address strap read at power-up."+ },+ {+ "number": "8",+ "name": "IN_OUT_SEL",+ "type": "input",+ "description": "4-level control pin selecting signal flow from IN0 or IN1 inputs to outputs; overridable by register control."+ },+ {+ "number": "9",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference."+ },+ {+ "number": "10",+ "name": "MOSI_SDA",+ "type": "bidirectional",+ "description": "Functions as SPI master-output-slave-input LVCMOS input or as SMBus open-drain bidirectional data line (SDA) requiring 2-5 kΩ external pull-up to 3.6 V."+ },+ {+ "number": "11",+ "name": "VOD_DE",+ "type": "input",+ "description": "4-level control pin selecting output driver amplitude and de-emphasis level for OUT0 and OUT1 outputs; overridable by register control."+ },+ {+ "number": "12",+ "name": "LOCK_N",+ "type": "tri_state",+ "description": "3.3 V tolerant open-drain active-low output indicating reclocker lock status, carrier detect, or interrupts; requires 2-5 kΩ external pull-up resistor to logic supply."+ },+ {+ "number": "13",+ "name": "VDD_CDR",+ "type": "power_in",+ "description": "2.5 V ± 5% power supply for reclocker circuitry."+ },+ {+ "number": "14",+ "name": "OUT1-",+ "type": "output",+ "description": "Differential complementary analog output with 100-Ω internal termination; requires external 4.7-µF AC coupling capacitor."+ },+ {+ "number": "15",+ "name": "OUT1+",+ "type": "output",+ "description": "Differential analog output with 100-Ω internal termination; requires external 4.7-µF AC coupling capacitor."+ },+ {+ "number": "16",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference."+ },+ {+ "number": "17",+ "name": "OUT0-",+ "type": "output",+ "description": "Differential complementary analog output with 100-Ω internal termination; requires external 4.7-µF AC coupling capacitor."+ },+ {+ "number": "18",+ "name": "OUT0+",+ "type": "output",+ "description": "Differential analog output with 100-Ω internal termination; requires external 4.7-µF AC coupling capacitor."+ },+ {+ "number": "19",+ "name": "OUT_CTRL",+ "type": "input",+ "description": "4-level control pin selecting output signal flow (raw data, recovered data, clock, or equalized data); overridable by register control."+ },+ {+ "number": "20",+ "name": "MISO_ADDR1",+ "type": "tri_state",+ "description": "Functions as SPI master-input-slave-output LVCMOS tristatable output or as 4-level SMBus address strap read at power-up."+ },+ {+ "number": "21",+ "name": "SCK_SCL",+ "type": "input",+ "description": "Functions as SPI serial clock input LVCMOS or as SMBus open-drain clock input tolerant to 3.3 V; requires 2-5 kΩ external pull-up resistor."+ },+ {+ "number": "22",+ "name": "VDDIO",+ "type": "power_in",+ "description": "2.5 V ± 5% power supply for LVCMOS I/O and 4-level input logic."+ },+ {+ "number": "23",+ "name": "VDD_LDO",+ "type": "bidirectional",+ "description": "Output of internal 1.8 V LDO regulator when VIN = 2.5 V (requires 1-µF and 0.1-µF bypass capacitors), or input when VIN = 1.8 V for lower power dual-supply operation."+ },+ {+ "number": "24",+ "name": "VIN",+ "type": "power_in",+ "description": "Power supply input accepting 2.5 V ± 5% (with internal LDO generating VDD_LDO) or 1.8 V ± 5% (dual-supply mode)."+ },+ {+ "number": "25",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 25 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 58,+ "cost_usd": 0.6137,+ "at": "2026-09-17T19:20:43"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lmh1219",+ "pages": 58,+ "sha256": "a85c764d93e9de34",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}