LMH1218RTWR

@@ -1,13 +1,238 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lmh1218rtwr",+  "title": "LMH1218RTWR",+  "brief": "Texas Instruments Video Interface ICs, WQFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments Video Interface ICs, WQFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "interface",     "lmh1218rtwr"   ],+  "component": {+    "mpn": "LMH1218RTWR",+    "manufacturer": "Texas Instruments",+    "package": "WQFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Interface",+    "subcategory": "Video Interface ICs",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lmh1218",+    "parts": {+      "symbol": "lmh1218rtwr.kicad_sym",+      "footprint": "lmh1218rtwr.kicad_mod",+      "model_3d": "lmh1218rtwr.glb",+      "model_3d_step": "lmh1218rtwr.step",+      "lbr": "lmh1218rtwr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "MODE_SEL",+        "type": "input",+        "description": "4-level input that selects the device host interface. Tie to 1 k\u03a9\u2192VDD to select SPI mode; other level codes select SMBus / address options (see Initialization Set Up)."+      },+      {+        "number": "2",+        "name": "IN_OUT_SEL_SPI_SS_N_ADR0",+        "type": "input",+        "description": "In SPI mode this pin is SS_N, the SPI slave select input (has an internal pullup, 2-Level). In SMBus mode it is IN_OUT_SEL and ADR0, providing input/output selection and SMBus address bit 0."+      },+      {+        "number": "3",+        "name": "EQ_SCL_SCK",+        "type": "input",+        "description": "In SPI mode this pin is SCK, the 2.5 V LVCMOS SPI serial clock input. In SMBus mode it is SCL, the SMBus clock, and it can also serve as an EQ strap."+      },+      {+        "number": "4",+        "name": "OUT_CTRL_MOSI_SDA",+        "type": "bidirectional",+        "description": "In SPI mode this pin is MOSI, the 2-Level SPI master-output/slave-input data receive line. In SMBus mode it is SDA (SMBus data) / OUT_CTRL strap."+      },+      {+        "number": "5",+        "name": "RESERVED",+        "type": "unconnected",+        "description": "Reserved. No Connect."+      },+      {+        "number": "6",+        "name": "ENABLE",+        "type": "input",+        "description": "4-Level enable input. 1 k\u03a9\u2192VDD or Float(Default): power-down until valid signal detected. 20 k\u03a9\u2192GND: Reserved. 1 k\u03a9\u2192GND: full power-down including signal detects and register reset on power-up."+      },+      {+        "number": "7",+        "name": "VDD",+        "type": "power_in",+        "description": "2.5 V \u00b15% supply input for the device core and I/O."+      },+      {+        "number": "8",+        "name": "IN1+",+        "type": "input",+        "description": "Noninverting analog differential input of channel 1. On-chip 100 \u03a9 terminating resistor connects IN1+ to IN1-; inputs require 4.7 \u00b5F AC-coupling capacitors."+      },+      {+        "number": "9",+        "name": "IN1-",+        "type": "input",+        "description": "Inverting analog differential input of channel 1. On-chip 100 \u03a9 terminating resistor connects IN1+ to IN1-; inputs require 4.7 \u00b5F AC-coupling capacitors."+      },+      {+        "number": "10",+        "name": "VSS",+        "type": "power_in",+        "description": "Device ground return."+      },+      {+        "number": "11",+        "name": "IN0+",+        "type": "input",+        "description": "Noninverting analog differential input of channel 0. On-chip 100 \u03a9 terminating resistor connects IN0+ to IN0-; inputs require 4.7 \u00b5F AC-coupling capacitors."+      },+      {+        "number": "12",+        "name": "IN0-",+        "type": "input",+        "description": "Inverting analog differential input of channel 0. On-chip 100 \u03a9 terminating resistor connects IN0+ to IN0-; inputs require 4.7 \u00b5F AC-coupling capacitors."+      },+      {+        "number": "13",+        "name": "LOS_INT_N",+        "type": "output",+        "description": "LVCMOS open-drain, 2-Level programmable interrupt output. Asserts on change in Loss-of-Signal state or violation of the internal eye-monitor threshold. Requires an external 4.7 k\u03a9 pullup; 3.3 V LVCMOS tolerant."+      },+      {+        "number": "14",+        "name": "SMPTE_10GbE",+        "type": "unconnected",+        "description": "No Connect in SPI mode. In SMBus mode this pin functions as the SMPTE / 10GbE mode strap."+      },+      {+        "number": "15",+        "name": "VOD_MISO_ADR1",+        "type": "output",+        "description": "In SPI mode this pin is MISO, the 2.5 V LVCMOS 2-Level SPI master-input/slave-output data transmit line. In SMBus mode it serves as VOD strap and SMBus address bit 1."+      },+      {+        "number": "16",+        "name": "LOCK",+        "type": "output",+        "description": "CDR lock-detect status output, 2.5 V LVCMOS 2-Level. High indicates CDR is locked; low indicates unlocked."+      },+      {+        "number": "17",+        "name": "RESERVED",+        "type": "unconnected",+        "description": "Reserved. No Connect."+      },+      {+        "number": "18",+        "name": "RESERVED",+        "type": "unconnected",+        "description": "Reserved. No Connect."+      },+      {+        "number": "19",+        "name": "OUT0-",+        "type": "output",+        "description": "Inverting 75 \u03a9 CML-compatible differential output of channel 0. On-chip 75 \u03a9 terminating resistor connects OUT0+ and OUT0- to VDD; outputs require 4.7 \u00b5F AC-coupling capacitors."+      },+      {+        "number": "20",+        "name": "OUT0+",+        "type": "output",+        "description": "Noninverting 75 \u03a9 CML-compatible differential output of channel 0. On-chip 75 \u03a9 terminating resistor connects OUT0+ and OUT0- to VDD; outputs require 4.7 \u00b5F AC-coupling capacitors."+      },+      {+        "number": "21",+        "name": "VDD",+        "type": "power_in",+        "description": "2.5 V \u00b15% supply input."+      },+      {+        "number": "22",+        "name": "OUT1-",+        "type": "output",+        "description": "Inverting analog differential output of channel 1. On-chip 100 \u03a9 terminating resistor connects OUT1+ to OUT1-; outputs require 4.7 \u00b5F AC-coupling capacitors."+      },+      {+        "number": "23",+        "name": "OUT1+",+        "type": "output",+        "description": "Noninverting analog differential output of channel 1. On-chip 100 \u03a9 terminating resistor connects OUT1+ to OUT1-; outputs require 4.7 \u00b5F AC-coupling capacitors."+      },+      {+        "number": "24",+        "name": "VSS",+        "type": "power_in",+        "description": "Device ground return."+      },+      {+        "number": "DAP",+        "name": "DAP",+        "type": "power_in",+        "description": "Exposed die-attach pad. Connect to GND with at least 5 vias (see package drawing) for electrical ground and thermal dissipation."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lmh1218",+        "pages": 58,+        "sha256": "8819557a1c9f9747",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "WQFN-24-EP(4x4)",+      "Category": "Interface",+      "Pins": "25"+    }+  },+  "variants": [+    {+      "mpn": "LMH1218RTWR",+      "kind": "packaging"+    },+    {+      "mpn": "LMH1218RTWRRTWT",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lmh1218rtwr"+  ],+  "discovery_pitch": "LMH1218RTWR (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +250,5 @@     "docs/lmh1218rtwr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file