← Commit history

lmc555cmx: factory component page (tier=mfr)

Ray ·7f8db1afad · ·parent cf5aa94
1 file changed +116−8
page.json+116−8
@@ -1,13 +1,126 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lmc555cmx",+  "title": "LMC555CMX",+  "brief": "Texas Instruments Timers / Clock Oscillators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments Timers / Clock Oscillators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "rtc",     "lmc555cmx"   ],+  "component": {+    "mpn": "LMC555CMX",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "RTC",+    "subcategory": "Timers / Clock Oscillators",+    "datasheet": "https://www.ti.com/lit/ds/symlink/lmc555cmx.pdf",+    "parts": {+      "symbol": "lmc555cmx.kicad_sym",+      "footprint": "lmc555cmx.kicad_mod",+      "model_3d": "lmc555cmx.glb",+      "model_3d_step": "lmc555cmx.step",+      "lbr": "lmc555cmx.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference voltage. All voltages in the datasheet are measured with respect to this pin."+      },+      {+        "number": "2",+        "name": "TRIG",+        "type": "input",+        "description": "Trigger input (active low). Responsible for transition of the flip-flop from set to reset. A negative-going pulse below 1/3 Vcc sets the output high. Typical trigger voltage ~1.67 V at Vs = 5 V; trigger current ~10 pA."+      },+      {+        "number": "3",+        "name": "OUT",+        "type": "output",+        "description": "Output driven waveform. CMOS/TTL-compatible push-pull output rated to source/sink up to ~50 mA at 5 V supply (tested at -10 mA / 50 mA output current levels)."+      },+      {+        "number": "4",+        "name": "RESET",+        "type": "input",+        "description": "Active-low reset input. Negative pulse applied to this pin disables or resets the timer. When not used for reset purposes it should be tied to V+ to avoid false triggering. VRES typ 0.7 V at Vs = 1.5 V (Vs must be >= 2.0 V if RESET is used at -20 degC or below)."+      },+      {+        "number": "5",+        "name": "CTRL",+        "type": "input",+        "description": "Control voltage input. Sets the threshold and trigger comparator levels (nominally 2/3 Vcc). Typically bypassed to GND with a 0.01 uF capacitor; can be driven externally to modulate the output waveform."+      },+      {+        "number": "6",+        "name": "THRES",+        "type": "input",+        "description": "Threshold input. Compares the applied voltage against the internal 2/3 Vcc reference; when exceeded, the flip-flop is reset and the output goes low. Threshold input current ~10 pA at Vs = 5 V."+      },+      {+        "number": "7",+        "name": "DISCH",+        "type": "output",+        "description": "Open-drain discharge output. Discharges the external timing capacitor between intervals (in phase with OUT). Toggles from high-impedance to low when the timing capacitor voltage reaches 2/3 Vcc. Discharge saturation voltage typ 150 mV at IDIS = 10 mA (Vs = 5 V)."+      },+      {+        "number": "8",+        "name": "V+",+        "type": "power_in",+        "description": "Positive supply voltage with respect to GND. Recommended operating range 1.5 V to 15 V (absolute max 15 V). Typical supply current 100 uA at Vs = 5 V."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/lmc555cmx.pdf",+        "pages": 30,+        "sha256": "3ac8d41ac202b0b0",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "SOIC-8",+      "Category": "RTC",+      "Pins": "8"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lmc555cmx"+  ],+  "discovery_pitch": "LMC555CMX (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +138,5 @@     "docs/lmc555cmx-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file