← Commit history
Publish 0.2.1
4 files changed
+435−11
lmc555cmmx-hero.glbadded⋯ 1 unchanged line ⋯
lmc555cmmx-hero.overlay.jsonadded+260@@ -0,0 +1,260 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LMC555CMMX",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 4.05,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.324,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.55,+ 1.55,+ -0.86,+ 0.86+ ],+ "pads_bbox_mm": [+ -2.025,+ 2.025,+ -0.925,+ 0.925+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "lmc555cmmx-etched.glb",+ "glb_sha256": "c65aa8f2e0f2e8d21683d4d8f7629f35b2901904c84da00421dd2e6b4ce9e91d",+ "footprint": "lmc555cmmx.kicad_mod",+ "footprint_sha256": "dca72da69de3263affb64fd1abd218db3cf30ff727c784b3f02c8c588a2875a8",+ "pins": "page.json component.pins",+ "pins_sha256": "94f2f98273da4b743a041d59084bff80f272cb49aa1fbd8be994d29271b1f961"+ },+ "generator": "adom-wiki 1.8.31 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "GND",+ "x": -2.125,+ "y": -0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "2",+ "text": "TRIG",+ "x": -2.125,+ "y": -0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "3",+ "text": "OUT",+ "x": -2.125,+ "y": 0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "4",+ "text": "RESET",+ "x": -2.125,+ "y": 0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "5",+ "text": "CONT",+ "x": 2.125,+ "y": 0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "6",+ "text": "THRES",+ "x": 2.125,+ "y": 0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "7",+ "text": "DISCH",+ "x": 2.125,+ "y": -0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "8",+ "text": "V+",+ "x": 2.125,+ "y": -0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -1.4,+ -0.75+ ],+ "size_mm": [+ 1.25,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -1.4,+ -0.25+ ],+ "size_mm": [+ 1.25,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -1.4,+ 0.25+ ],+ "size_mm": [+ 1.25,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -1.4,+ 0.75+ ],+ "size_mm": [+ 1.25,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 1.4,+ 0.75+ ],+ "size_mm": [+ 1.25,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 1.4,+ 0.25+ ],+ "size_mm": [+ 1.25,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 1.4,+ -0.25+ ],+ "size_mm": [+ 1.25,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 1.4,+ -0.75+ ],+ "size_mm": [+ 1.25,+ 0.35+ ],+ "rot": 0.0+ }+ ]+}
package.json+165−4@@ -1,6 +1,6 @@ { "slug": "lmc555cmmx",- "version": "0.2.0",+ "version": "0.2.1", "type": "component", "description": "Texas Instruments Timers / Clock Oscillators, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -20,11 +20,172 @@ "lmc555cmmx.kicad_mod", "lmc555cmmx.glb", "lmc555cmmx.step",+ "lmc555cmmx-etched.step", "lmc555cmmx.lbr", "docs/hero.png", "docs/lmc555cmmx-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "pads.json"- ]-}+ "pads.json",+ "lmc555cmmx-hero.glb",+ "lmc555cmmx-hero.overlay.json"+ ],+ "component": {+ "mpn": "LMC555CMMX",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-8-0.65mm",+ "pin_count": 8,+ "category": "RTC",+ "subcategory": "Timers / Clock Oscillators",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lmc555cmmx.pdf",+ "parts": {+ "symbol": "lmc555cmmx.kicad_sym",+ "footprint": "lmc555cmmx.kicad_mod",+ "model_3d": "lmc555cmmx-hero.glb",+ "model_3d_plain": "lmc555cmmx.glb",+ "model_3d_step": "lmc555cmmx-etched.step",+ "model_3d_step_plain": "lmc555cmmx.step",+ "lbr": "lmc555cmmx.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference (0 V) for the device. Connect to the negative supply rail."+ },+ {+ "number": "2",+ "name": "TRIG",+ "type": "input",+ "description": "Trigger input. A negative pulse below 1/3 V+ on this pin sets the internal flip-flop, driving OUT high and starting the timing cycle."+ },+ {+ "number": "3",+ "name": "OUT",+ "type": "output",+ "description": "Push-pull timer output. Swings between GND and V+ and can source or sink load current (typ. up to ~50 mA at V+ = 15 V)."+ },+ {+ "number": "4",+ "name": "RESET",+ "type": "input",+ "description": "Active-low reset. Pulling below ~0.7 V forces OUT low and discharges the timing capacitor regardless of TRIG. Tie to V+ when unused."+ },+ {+ "number": "5",+ "name": "CONT",+ "type": "input",+ "description": "Control voltage. Provides access to the internal 2/3 V+ threshold reference; can be driven externally to modulate timing or pulse width. Typically bypassed to GND via a 10 nF capacitor when unused."+ },+ {+ "number": "6",+ "name": "THRES",+ "type": "input",+ "description": "Threshold input. When the voltage on this pin exceeds 2/3 V+, the internal flip-flop is reset, driving OUT low and turning on the discharge transistor."+ },+ {+ "number": "7",+ "name": "DISCH",+ "type": "output",+ "description": "Discharge. Open-drain output from an internal N-channel MOSFET; used to discharge the external timing capacitor when OUT is low."+ },+ {+ "number": "8",+ "name": "V+",+ "type": "power_in",+ "description": "Positive supply voltage, 1.5 V to 15 V. Bypass to GND with a 100 nF ceramic capacitor placed close to the pin."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "docs/lmc555cmmx-datasheet.pdf",+ "pages": 32,+ "sha256": "23c01b550f0a28cb",+ "source_tier": "mfr",+ "maker_url_dead": "https://www.ti.com/lit/ds/symlink/lmc555cmmx.pdf",+ "citation": "Texas Instruments datasheet",+ "citation_note": "maker link no longer resolves; copy stored with this page"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "pin1": {+ "pad": "1",+ "at": [+ -1.4,+ -0.75+ ],+ "corner": "top-left",+ "source": "silk-marker",+ "derived_from": "VSSOP-8_2.3x2mm_P0.5mm@sha256:dca72da69de3263a",+ "mark": "drawn"+ },+ "models_3d": [+ {+ "file": "lmc555cmmx.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2,+ 0.85+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lmc555cmmx-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2,+ 0.85+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "bbc099c942ab2aefb6726e6de90c967ad72021c43613f81acd9fb5a7c1509e47",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "LMC555CMMX",+ "brief": "Texas Instruments Timers / Clock Oscillators, VSSOP-8-0.65mm. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "VSSOP-8-0.65mm",+ "Category": "RTC",+ "Pins": "8"+ }+ },+ "discovery_triggers": [+ "lmc555cmmx"+ ],+ "discovery_pitch": "LMC555CMMX (Texas Instruments) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+10−7@@ -4,7 +4,7 @@ "slug": "lmc555cmmx", "title": "LMC555CMMX", "brief": "Texas Instruments Timers / Clock Oscillators, VSSOP-8-0.65mm. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.2.0",+ "version": "0.2.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -193,11 +193,12 @@ "docs/hero.png", "docs/lmc555cmmx-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json",+ "lmc555cmmx-hero.glb",+ "lmc555cmmx-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "variants": [ { "mpn": "LMC555CMMX",@@ -212,5 +213,7 @@ "kind": "packaging" } ],- "updated_at": "2026-09-28T17:13:10.109Z"-}+ "updated_at": "2026-09-28T17:13:10.109Z",+ "description": "Texas Instruments Timers / Clock Oscillators, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}