component
LMC555 CMOS Timer
Public Made by Adomby adom
CMOS version of the 555 timer with low power, high frequency, and single-supply operation.
← Commit history
page.json+122−8@@ -1,8 +1,11 @@ {+ "schema_version": 1,+ "type": "component", "slug": "lmc555",+ "title": "LMC555 CMOS Timer",+ "brief": "CMOS version of the 555 timer with low power, high frequency, and single-supply operation.", "version": "0.1.0",- "type": "component",- "description": "CMOS version of the 555 timer with low power, high frequency, and single-supply operation.",+ "license": "CC-BY-SA-4.0", "tags": [ "timer", "555",@@ -12,6 +15,122 @@ "ti", "soic-8" ],+ "component": {+ "mpn": "LMC555",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Analog",+ "subcategory": "Timer",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lmc555.pdf",+ "parts": {+ "symbol": "lmc555.kicad_sym",+ "footprint": "lmc555.kicad_mod",+ "model_3d": "lmc555.glb",+ "model_3d_step": "lmc555.step"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference voltage (0 V return for the supply)."+ },+ {+ "number": "2",+ "name": "TRIGGER",+ "type": "input",+ "description": "Trigger input responsible for transition of the internal flip-flop from set to reset. The output pulse of the timer depends on the amplitude of the external trigger pulse applied to this pin. Trigger threshold is nominally 1/3 V+."+ },+ {+ "number": "3",+ "name": "OUTPUT",+ "type": "output",+ "description": "Output driven waveform. Sources/sinks up to 10 mA (VS=5 V) or 50 mA (VS=12 V) to directly drive TTL and CMOS loads."+ },+ {+ "number": "4",+ "name": "RESET",+ "type": "input",+ "description": "Active-low reset. A negative pulse applied to this pin disables/resets the timer. When not used for reset purposes, connect this pin to V+ to avoid false triggering. Typical VRES = 0.7 V at VS = 1.5 V."+ },+ {+ "number": "5",+ "name": "CONTROL_VOLTAGE",+ "type": "input",+ "description": "Control-voltage input sets the internal threshold and trigger levels (nominally 2/3 V+). An external voltage applied here modulates the output pulse width/waveform. Typically decoupled to ground with 0.01 uF when unused."+ },+ {+ "number": "6",+ "name": "THRESHOLD",+ "type": "input",+ "description": "Threshold comparator input; compared against an internal reference of 2/3 V+. The voltage at this pin sets the reset state of the internal flip-flop."+ },+ {+ "number": "7",+ "name": "DISCHARGE",+ "type": "output",+ "description": "Open-collector (open-drain) discharge pin that shorts the external timing capacitor to ground between intervals (in phase with OUTPUT). Toggles the output from high to low when THRESHOLD reaches 2/3 V+."+ },+ {+ "number": "8",+ "name": "V+",+ "type": "power_in",+ "description": "Positive supply voltage with respect to ground. Operating range 1.5 V to 15 V."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/lmc555.pdf",+ "pages": 35,+ "sha256": "993be6e487fb5fe6",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Type": "CMOS timer (555-type)",+ "Supply voltage": "1.5 V to 15 V",+ "Max frequency": "3 MHz",+ "Supply current": "100 uA typ at 5 V",+ "Modes": "Astable, monostable",+ "Timing": "External R and C",+ "Operating temperature": "-40 C to 85 C"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "555 timer",+ "CMOS 555",+ "oscillator",+ "pulse generator",+ "monostable timer"+ ],+ "discovery_pitch": "A low-power CMOS 555 that oscillates to 3 MHz and runs down to 1.5 V, for timers, PWM, and pulse generation.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -28,10 +147,5 @@ "docs/lmc555-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }