← Commit history

Initial commit: component/lm95235dimmx

Ray ·a2e5e67740 ·
2 files changed +88
README.mdadded+54
@@ -0,0 +1,54 @@+# LM95235DIMMX++**Texas Instruments** · Temperature Sensors · VSSOP-8-0.65mm++LM95235DIMMX from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Device power supply, 3.0 V to 3.6 V. Requires a 10 µF bypass capacitor in parallel with 0.1 µF and 100 pF, with the 100 pF placed closest to the pin. Typical supply current is 350 µA at a 1 Hz conversion rate. |+| 2 | D+ | passive | Positive analog input from the remote thermal diode (anode). Connects to the diode-connected transistor's base/collector (MMBT3904) or the D+ node of an on-die processor thermal diode. Route with D- as a tightly coupled differential pair; a 100 pF filter capacitor across D+/D- close to the LM95235 is recommended. |+| 3 | D- | passive | Negative analog input from the remote thermal diode (cathode/emitter). Provides the return path for the temperature-sensing bias currents; internally referenced but should not be tied directly to board ground - return to LM95235 GND through the analog input pair only. |+| 4 | T_CRIT | output | Critical-temperature comparator output. Open-drain, active-low; requires an external pull-up resistor (typ. 1.3 kΩ to 3.3 V). Asserted when either unmasked channel exceeds its programmed T_CRIT limit; typically used for system shutdown or fan control. |+| 5 | GND | power_in | Device ground reference for both digital and analog circuitry. |+| 6 | OS/A0 | bidirectional | Dual-function pin. Defaults after power-up as a three-level SMBus slave address input (A0): tie to VDD, GND, or to the mid-point of a resistor divider between VDD and GND to pick one of three slave addresses. When reprogrammed via the configuration register it becomes the OS (over-temperature shutdown) comparator output - active-low, open-drain, requiring an external pull-up. |+| 7 | SMBDAT | bidirectional | SMBus 2.0 serial data line (SMBus/I²C-compatible). Open-drain; requires an external pull-up resistor (typ. 1.3 kΩ to 3.3 V). Supports the SMBus TIMEOUT feature. |+| 8 | SMBCLK | input | SMBus 2.0 serial clock input (SMBus/I²C-compatible). Driven by the SMBus master; requires an external pull-up (typ. 1.3 kΩ to 3.3 V) on the bus. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8-0.65mm |+| Category | Sensors |+| Pins | 8 |++## Ordering variants++Same part, different packaging or reel option.++- `LM95235DIMMX/NOPB`+- `LM95235DIMM/NOPB`+- `LM95235DIMMXCIMMX/NOPB`+- `LM95235DIMMXCIMM/NOPB`+- `LM95235DIMMXEIMM/NOPB`+- `LM95235DIMMXQEIMM/NOPB`++## CAD (KiCad official)++- Symbol: `LM95235DIMMX`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm95235) (None pp, sha256 `5d83385b378f1386`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm95235dimmx-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lm95235dimmx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Temperature Sensors, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensors",+    "lm95235dimmx"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm95235dimmx.kicad_sym",+    "lm95235dimmx.kicad_mod",+    "lm95235dimmx.glb",+    "lm95235dimmx.step",+    "lm95235dimmx.lbr",+    "docs/hero.png",+    "docs/lm95235dimmx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file