← Commit history

lm7905ct: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·eadd83638c · ·parent 9f60e7f
2 files changed +87−7
package.json+45−5
@@ -53,19 +53,19 @@         "number": "1",         "name": "GND",         "type": "power_in",-        "description": "Ground/common reference pin; low ground-pin current (quiescent current 1 mA typ, 2 mA max at TJ=25\u00b0C) allows the output voltage to be boosted above the preset value with an external resistor divider."+        "description": "Ground/common reference pin; low ground-pin current (quiescent current 1 mA typ, 2 mA max at TJ=25°C) allows the output voltage to be boosted above the preset value with an external resistor divider."       },       {         "number": "2",         "name": "INPUT",         "type": "power_in",-        "description": "Unregulated negative supply input; absolute maximum input voltage is \u221225V for the \u22125V output version, and a 2.2\u00b5F input bypass capacitor (solid tantalum, or 25\u00b5F aluminum electrolytic) is recommended if the regulator is more than 3\" from the raw supply filter capacitor."+        "description": "Unregulated negative supply input; absolute maximum input voltage is −25V for the −5V output version, and a 2.2µF input bypass capacitor (solid tantalum, or 25µF aluminum electrolytic) is recommended if the regulator is more than 3\" from the raw supply filter capacitor."       },       {         "number": "3",         "name": "OUTPUT",         "type": "power_out",-        "description": "Regulated \u22125V output (\u22124.8V to \u22125.2V at TJ=25\u00b0C), rated for 1.5A continuous output current (2.2A peak) and requiring a 1\u00b5F output capacitor (solid tantalum) for stability."+        "description": "Regulated −5V output (−4.8V to −5.2V at TJ=25°C), rated for 1.5A continuous output current (2.2A peak) and requiring a 1µF output capacitor (solid tantalum) for stability."       }     ],     "provenance": {@@ -103,6 +103,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm7905ct.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          10.25,+          4.455,+          28.525+        ],+        "zmin_mm": -9.75,+        "centre_offset_mm": 0.932,+        "footprint_binding": "identity",+        "sha256": "7cb065d935df5771f0ba6e48ddd180863a121af76483dad7f18e667a7b68204a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm7905ct-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          10.25,+          4.455,+          28.525+        ],+        "zmin_mm": -9.75,+        "centre_offset_mm": 0.932,+        "footprint_binding": "identity",+        "sha256": "6fcd1663182f509dbaf919b031a1f7f52f1dcacf5fd1098f2e93ad0ebe47adaf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -88,7 +88,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm7905ct.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          10.25,+          4.455,+          28.525+        ],+        "zmin_mm": -9.75,+        "centre_offset_mm": 0.932,+        "footprint_binding": "identity",+        "sha256": "7cb065d935df5771f0ba6e48ddd180863a121af76483dad7f18e667a7b68204a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm7905ct-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          10.25,+          4.455,+          28.525+        ],+        "zmin_mm": -9.75,+        "centre_offset_mm": 0.932,+        "footprint_binding": "identity",+        "sha256": "6fcd1663182f509dbaf919b031a1f7f52f1dcacf5fd1098f2e93ad0ebe47adaf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -135,4 +175,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}