component
LM75BIMMX-3
Public Made by Adomby adom
Texas Instruments Temperature and Humidity Sensor, VSSOP-8-0.65mm. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -32,7 +32,7 @@ "number": "1", "name": "SDA", "type": "bidirectional",- "description": "I2C serial bi-directional data line. Open-drain; requires an external pullup resistor or current source to +VS. VIH = +VS \u00d7 0.7 min, VIL = +VS \u00d7 0.3 max. Absolute-max voltage 6.5 V."+ "description": "I2C serial bi-directional data line. Open-drain; requires an external pullup resistor or current source to +VS. VIH = +VS × 0.7 min, VIL = +VS × 0.3 max. Absolute-max voltage 6.5 V." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "O.S.", "type": "output",- "description": "Over-temperature shutdown output. Open-drain; requires a pullup resistor to the controller interrupt line. Active-low when the measured temperature exceeds the programmed T_OS limit (default 80\u00b0C, T_HYST 75\u00b0C). O.S. output saturation voltage 0.8 V max at 4 mA sink; max sink current 10 mA."+ "description": "Over-temperature shutdown output. Open-drain; requires a pullup resistor to the controller interrupt line. Active-low when the measured temperature exceeds the programmed T_OS limit (default 80°C, T_HYST 75°C). O.S. output saturation voltage 0.8 V max at 4 mA sink; max sink current 10 mA." }, { "number": "4",@@ -56,25 +56,25 @@ "number": "5", "name": "A2", "type": "input",- "description": "User-set I2C address input (MSB of the 3-bit address selector). Tie to GND (logic 0) or +VS (logic 1). Absolute-max voltage (+VS + 0.3) V and must be \u2264 6.5 V."+ "description": "User-set I2C address input (MSB of the 3-bit address selector). Tie to GND (logic 0) or +VS (logic 1). Absolute-max voltage (+VS + 0.3) V and must be ≤ 6.5 V." }, { "number": "6", "name": "A1", "type": "input",- "description": "User-set I2C address input. Tie to GND (logic 0) or +VS (logic 1). Absolute-max voltage (+VS + 0.3) V and must be \u2264 6.5 V."+ "description": "User-set I2C address input. Tie to GND (logic 0) or +VS (logic 1). Absolute-max voltage (+VS + 0.3) V and must be ≤ 6.5 V." }, { "number": "7", "name": "A0", "type": "input",- "description": "User-set I2C address input (LSB of the 3-bit address selector). Tie to GND (logic 0) or +VS (logic 1). Absolute-max voltage (+VS + 0.3) V and must be \u2264 6.5 V."+ "description": "User-set I2C address input (LSB of the 3-bit address selector). Tie to GND (logic 0) or +VS (logic 1). Absolute-max voltage (+VS + 0.3) V and must be ≤ 6.5 V." }, { "number": "8", "name": "+VS", "type": "power_in",- "description": "Positive supply voltage input. DC 3 V to 5.5 V (LM75BIMMX-3 nominal 3.3 V). Decouple with a 100-nF bypass capacitor close to the pin plus 10-\u00b5F bulk capacitance in the near vicinity. Operating supply current 280 \u00b5A typical; shutdown 4 \u00b5A typical."+ "description": "Positive supply voltage input. DC 3 V to 5.5 V (LM75BIMMX-3 nominal 3.3 V). Decouple with a 100-nF bypass capacitor close to the pin plus 10-µF bulk capacitance in the near vicinity. Operating supply current 280 µA typical; shutdown 4 µA typical." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/lm75bimmx-3-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }