← Commit history
page.json+11−8@@ -32,19 +32,19 @@ "number": "1", "name": "SDA", "type": "bidirectional",- "description": "I2C serial data line. Open-drain bidirectional data pin; requires an external pull-up (typ. 10 k\u03a9) to VCC. VIH \u2265 0.7\u00b7VCC, VIL \u2264 0.3\u00b7VCC; VOL \u2264 0.4 V at IOL = 3 mA."+ "description": "I2C serial data line. Open-drain bidirectional data pin; requires an external pull-up (typ. 10 kΩ) to VCC. VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC; VOL ≤ 0.4 V at IOL = 3 mA." }, { "number": "2", "name": "SCL", "type": "input",- "description": "I2C serial clock input from the bus master. Supports 20 Hz to 400 kHz (Fast-mode). Requires an external pull-up (typ. 10 k\u03a9) to VCC. Must not be left floating."+ "description": "I2C serial clock input from the bus master. Supports 20 Hz to 400 kHz (Fast-mode). Requires an external pull-up (typ. 10 kΩ) to VCC. Must not be left floating." }, { "number": "3", "name": "OS", "type": "output",- "description": "Overtemperature Shutdown alert output (open-drain). Asserts when the measured temperature exceeds the programmable TTH(OTS) threshold (default 80\u00b0C) and clears when it drops below THYS (default 75\u00b0C). Configurable as comparator or interrupt mode; requires a pull-up to VCC. VOL \u2264 0.4 V at IOL = 3 mA; max sink 10 mA."+ "description": "Overtemperature Shutdown alert output (open-drain). Asserts when the measured temperature exceeds the programmable TTH(OTS) threshold (default 80°C) and clears when it drops below THYS (default 75°C). Configurable as comparator or interrupt mode; requires a pull-up to VCC. VOL ≤ 0.4 V at IOL = 3 mA; max sink 10 mA." }, { "number": "4",@@ -56,25 +56,25 @@ "number": "5", "name": "A2", "type": "input",- "description": "I2C slave-address user bit 2. Tie to GND or VCC to set the lower three bits of the 7-bit I2C slave address (upper 4 bits fixed at 1001b). Must not be left floating; VIH \u2265 0.7\u00b7VCC, VIL \u2264 0.3\u00b7VCC (150 mV hysteresis)."+ "description": "I2C slave-address user bit 2. Tie to GND or VCC to set the lower three bits of the 7-bit I2C slave address (upper 4 bits fixed at 1001b). Must not be left floating; VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC (150 mV hysteresis)." }, { "number": "6", "name": "A1", "type": "input",- "description": "I2C slave-address user bit 1. Tie to GND or VCC to set the address. Must not be left floating; VIH \u2265 0.7\u00b7VCC, VIL \u2264 0.3\u00b7VCC (150 mV hysteresis)."+ "description": "I2C slave-address user bit 1. Tie to GND or VCC to set the address. Must not be left floating; VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC (150 mV hysteresis)." }, { "number": "7", "name": "A0", "type": "input",- "description": "I2C slave-address user bit 0. Tie to GND or VCC to set the address. Must not be left floating; VIH \u2265 0.7\u00b7VCC, VIL \u2264 0.3\u00b7VCC (150 mV hysteresis)."+ "description": "I2C slave-address user bit 0. Tie to GND or VCC to set the address. Must not be left floating; VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC (150 mV hysteresis)." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Supply voltage input, 2.8 V to 5.5 V (absolute max 6 V). Typical IDD \u2248 100 \u00b5A (active), ~0.2 \u00b5A in shutdown. Decouple to GND with a 0.1 \u00b5F ceramic capacitor."+ "description": "Supply voltage input, 2.8 V to 5.5 V (absolute max 6 V). Typical IDD ≈ 100 µA (active), ~0.2 µA in shutdown. Decouple to GND with a 0.1 µF ceramic capacitor." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/lm75bdp-ms-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }