← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# LM75BDP-MS++**MSKSEMI** · Temperature and Humidity Sensor · MSOP-8++LM75BDP-MS from MSKSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SDA | bidirectional | I2C serial data line. Open-drain bidirectional data pin; requires an external pull-up (typ. 10 kΩ) to VCC. VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC; VOL ≤ 0.4 V at IOL = 3 mA. |+| 2 | SCL | input | I2C serial clock input from the bus master. Supports 20 Hz to 400 kHz (Fast-mode). Requires an external pull-up (typ. 10 kΩ) to VCC. Must not be left floating. |+| 3 | OS | output | Overtemperature Shutdown alert output (open-drain). Asserts when the measured temperature exceeds the programmable TTH(OTS) threshold (default 80°C) and clears when it drops below THYS (default 75°C). Configurable as comparator or interrupt mode; requires a pull-up to VCC. VOL ≤ 0.4 V at IOL = 3 mA; max sink 10 mA. |+| 4 | GND | power_in | Device ground reference (0 V). |+| 5 | A2 | input | I2C slave-address user bit 2. Tie to GND or VCC to set the lower three bits of the 7-bit I2C slave address (upper 4 bits fixed at 1001b). Must not be left floating; VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC (150 mV hysteresis). |+| 6 | A1 | input | I2C slave-address user bit 1. Tie to GND or VCC to set the address. Must not be left floating; VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC (150 mV hysteresis). |+| 7 | A0 | input | I2C slave-address user bit 0. Tie to GND or VCC to set the address. Must not be left floating; VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC (150 mV hysteresis). |+| 8 | VCC | power_in | Supply voltage input, 2.8 V to 5.5 V (absolute max 6 V). Typical IDD ≈ 100 µA (active), ~0.2 µA in shutdown. Decouple to GND with a 0.1 µF ceramic capacitor. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MSKSEMI |+| Package | MSOP-8 |+| Category | Sensor |+| Pins | 8 |++## Ordering variants++- `LM75BDP-MS`+- `LM75BDP-MSDR`+- `LM75BDP-MSSOP-8`++## CAD (KiCad official)++- Symbol: `LM75BDP-MS`+- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`+- 3D model: MSOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MSKSEMI datasheet](docs/lm75bdp-ms-datasheet.pdf) (16 pp, sha256 `51829265141856b5`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm75bdp-ms-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lm75bdp-ms",+ "version": "0.1.0",+ "type": "component",+ "description": "MSKSEMI Temperature and Humidity Sensor, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "sensor",+ "lm75bdp-ms"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm75bdp-ms.kicad_sym",+ "lm75bdp-ms.kicad_mod",+ "lm75bdp-ms.glb",+ "lm75bdp-ms.step",+ "lm75bdp-ms.lbr",+ "docs/hero.png",+ "docs/lm75bdp-ms-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}