← Commit history

Initial commit: component/lm5575mhx

Ray ·3db3af54fa ·
2 files changed +95
README.mdadded+61
@@ -0,0 +1,61 @@+# LM5575MHX++**Texas Instruments** · DC-DC Converters · HTSSOP-16-EP++LM5575MHX from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC | power_out | Bias regulator output. VCC tracks VIN up to ~9V then regulates to ~7V. Requires 0.1 µF to 1 µF ceramic decoupling capacitor. Can be back-fed from an external 7.5-14V rail to reduce internal power dissipation. |+| 2 | SD | input | Shutdown / UVLO input. Below 0.7V the regulator is in low-power shutdown; 0.7V-1.225V puts the part in standby; above 1.225V enables normal operation. Internally pulled up by ~5 µA current source. |+| 3 | VIN | power_in | Input supply voltage. Nominal operating range 6V to 75V. |+| 4 | SYNC | bidirectional | Oscillator synchronization input or output. Can be driven by an external clock or by another LM5575 for master/slave synchronization of multiple devices. |+| 5 | COMP | output | Internal error amplifier output. Loop-compensation network connects between COMP and FB. |+| 6 | FB | input | Feedback input from the regulated output. Connected to the inverting input of the internal error amplifier; regulation threshold is 1.225V. |+| 7 | RT | input | Internal oscillator frequency-set input. An external resistor from RT to AGND programs the switching frequency (50 kHz to 500 kHz). |+| 8 | RAMP | input | Ramp-control signal for emulated current-mode control. External capacitor from RAMP to AGND sets the current-sense ramp slope; recommended 50 pF to 2000 pF. |+| 9 | AGND | power_in | Analog ground. Internal reference return for the regulator control circuitry. |+| 10 | SS | input | Soft-start. An external capacitor with an internal 10 µA current source sets the error amplifier reference ramp-up time. Held low during standby, VCC UVLO, and thermal shutdown. |+| 11 | OUT | input | Output-voltage sense/connection. Connects directly to the regulator output voltage. |+| 12 | PGND | power_in | Power ground. Low-side return for the PRE switch and the IS current-sense resistor. |+| 13 | IS | input | Current-sense input for the recirculating (freewheel) diode current. An internal sense resistor and sample/hold measures diode current at end of the off-time to provide the emulated current-mode ramp DC level. |+| 14 | SW | power_out | Switch node. Source terminal of the internal buck switch; connects to the external Schottky freewheel diode and the buck inductor. |+| 15 | PRE | output | Auxiliary bootstrap-capacitor pre-charge output. Open-drain output connected to SW for pre-charging the bootstrap capacitor at very light loads or prior to enable. Internal pre-charge MOSFET turns on ~250 ns before each buck switch on-time. |+| 16 | BST | power_in | Bootstrap-capacitor boost input. External 0.022 µF ceramic capacitor between BST and SW; charged from VCC through an internal diode during the buck switch off-time. |+| EP | EP | passive | Exposed thermal pad on the underside of the package. Recommended to connect to the PCB ground plane for improved thermal dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-16-EP |+| Category | PMIC |+| Pins | 17 |++## Ordering variants++Same part, different packaging or reel option.++- `LM5575MHX`+- `LM5575MHXQMH`+- `LM5575MHXQMHX`++## CAD (KiCad official)++- Symbol: `LM5575MHX`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](docs/lm5575mhx-datasheet.pdf) (24 pp, sha256 `3b7d52abfb20c293`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5575mhx-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lm5575mhx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "lm5575mhx"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm5575mhx.kicad_sym",+    "lm5575mhx.kicad_mod",+    "lm5575mhx.glb",+    "lm5575mhx.step",+    "lm5575mhx.lbr",+    "docs/hero.png",+    "docs/lm5575mhx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file