← Commit history

lm5574mtx: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·5795e46f5c · ·parent 00a4822
1 file changed +123−1
page.json+123−1
@@ -33,5 +33,127 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "LM5574MTX",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "DC-DC Converters",+    "datasheet": "https://www.ti.com/lit/ds/symlink/lm5574mtx.pdf",+    "parts": {+      "symbol": "lm5574mtx.kicad_sym",+      "footprint": "lm5574mtx.kicad_mod",+      "model_3d": "lm5574mtx-etched.glb",+      "model_3d_plain": "lm5574mtx.glb",+      "model_3d_step": "lm5574mtx-etched.step",+      "model_3d_step_plain": "lm5574mtx.step",+      "lbr": "lm5574mtx.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VCC",+        "type": "power_out",+        "description": "Output of the internal bias regulator. Vcc tracks Vin up to 9V; above 9V it is regulated to ~7V. Requires a 0.1µF-1µF ceramic decoupling capacitor. An external 7.5V-14V supply may be applied here to reduce internal power dissipation."+      },+      {+        "number": "2",+        "name": "SD",+        "type": "input",+        "description": "Shutdown / UVLO input. VSD < 0.7V = low-power shutdown; 0.7V-1.225V = standby; > 1.225V = operational. A resistor divider from VIN sets a line-UVLO threshold; if left open a 5µA internal pull-up enables the regulator."+      },+      {+        "number": "3",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage. Nominal operating range 6V to 75V (absolute maximum 76V)."+      },+      {+        "number": "4",+        "name": "SYNC",+        "type": "bidirectional",+        "description": "Oscillator synchronization input/output. Can be driven by an external clock through an external pull-down device, or tied between multiple LM5574 devices to self-synchronize. Source impedance ~11kΩ, sink impedance ~110Ω, falling threshold 1.3V, min pulse 15ns."+      },+      {+        "number": "5",+        "name": "COMP",+        "type": "output",+        "description": "Output of the internal transconductance error amplifier. Connect the loop-compensation network between this pin and FB. Sink/source capability ~3mA, unity-gain bandwidth ~3MHz."+      },+      {+        "number": "6",+        "name": "FB",+        "type": "input",+        "description": "Feedback input to the internal error amplifier (inverting input). Regulation reference is 1.225V ±1.5%; bias current ~17nA."+      },+      {+        "number": "7",+        "name": "RT",+        "type": "input",+        "description": "Oscillator frequency-set input. A single resistor from RT to AGND programs the switching frequency between 50kHz and 500kHz (e.g. RT = 32.4kΩ → ~200kHz; RT = 11kΩ → ~485kHz)."+      },+      {+        "number": "8",+        "name": "RAMP",+        "type": "input",+        "description": "Ramp-control signal for the emulated current-mode PWM. An external capacitor (50pF-2000pF) from RAMP to AGND sets the emulated ramp slope."+      },+      {+        "number": "9",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground. Internal reference for the regulator control functions; return for RT and RAMP timing components."+      },+      {+        "number": "10",+        "name": "SS",+        "type": "input",+        "description": "Soft-start. An external capacitor and an internal 10µA current source set the rise time of the error-amp reference. Held low during standby, VCC UVLO, and thermal shutdown."+      },+      {+        "number": "11",+        "name": "OUT",+        "type": "input",+        "description": "Output-voltage sense connection. Connect directly to the regulated output voltage rail; used by the diode current-sense/emulated-ramp circuitry."+      },+      {+        "number": "12",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground. Low-side reference for the pre-charge (PRE) switch and for the internal IS current-sense resistor."+      },+      {+        "number": "13",+        "name": "IS",+        "type": "input",+        "description": "Current-sense input for the external re-circulating (Schottky) diode. An internal 250mΩ sense resistor and sample/hold measure diode current near the end of the off-time, providing the DC level of the emulated current ramp."+      },+      {+        "number": "14",+        "name": "SW",+        "type": "output",+        "description": "Switching node - source of the internal 75V/750mΩ N-channel buck MOSFET. Connect to the external Schottky recirculation diode and the buck inductor. Steady-state minimum rating -1.5V."+      },+      {+        "number": "15",+        "name": "PRE",+        "type": "output",+        "description": "Pre-charge assist for the bootstrap capacitor. Open-drain output (Rds(on) ~70Ω) that turns on for ~250ns each cycle just before the buck-switch on-time; usually tied to SW to keep BST charged under very light load or when the output is pre-charged before enable."+      },+      {+        "number": "16",+        "name": "BST",+        "type": "power_in",+        "description": "Bootstrap-capacitor input for the high-side gate drive. Connect a ~0.022µF ceramic capacitor between BST and SW; the cap is recharged from VCC through an internal diode during the buck-switch off-time. BOOST UVLO ~4V."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}