← Commit history

Initial commit: component/lm536035qpwptq1

Ray ·ee02f4f83b ·
2 files changed +264
README.mdadded+54
@@ -0,0 +1,54 @@+# LM536035QPWPTQ1++**Texas Instruments** · DC-DC Converters · HTSSOP-16-EP++LM536035QPWPTQ1 from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Regulator switch node with voltage range -0.3 V to VIN+0.3 V; connect pins 1 and 2 together on PCB to power inductor. |+| 2 | SW | output | Regulator switch node with voltage range -0.3 V to VIN+0.3 V; connect pins 1 and 2 together on PCB to power inductor. |+| 3 | CBOOT | power_in | Bootstrap supply input for high-side gate driver with voltage range -0.3 V to 3.6 V; connect 470 nF capacitor to SW. |+| 4 | VCC | power_in | Internal 3.15 V regulator output with voltage range -0.3 V to 4.2 V supplying internal control circuits; connect 3.3 µF capacitor to GND. |+| 5 | BIAS | input | Input to internal LDO voltage regulator with voltage range -0.3 V to 16 V; connect to output voltage with 0.1 µF capacitor to GND. |+| 6 | SYNC | input | Synchronization input to regulator with voltage range -0.3 V to 5.5 V and logic thresholds VIH=1.5 V, VIL=0.4 V; ground when not used. |+| 7 | FPWM | input | Mode control input for forced PWM (high) or auto mode (low) with voltage range -0.3 V to 5.5 V and logic thresholds VIH=1.5 V, VIL=0.4 V. |+| 8 | RESET | output | Open-drain reset output with voltage range -0.3 V to 8 V and maximum 1 mA current; high indicates power OK, low indicates fault or EN low. |+| 9 | FB | input | Feedback input to regulator with voltage range -0.3 V to 16 V (fixed modes) or -0.3 V to 5.5 V (ADJ option); connect to output voltage for fixed or divider tap for ADJ. |+| 10 | AGND | power_in | Analog ground reference with voltage offset ±0.3 V to PGND (±2 V transient tolerance); connect to EP and PGND on PCB. |+| 11 | EN | input | Enable input with voltage range -0.3 V to 40 V; rising threshold 2 V for ON, falling threshold 0.8 V for complete shutdown. |+| 12 | VIN | power_in | Input supply voltage with nominal range 3.9 V to 36 V and 42 V transient peak; connect bypass capacitors to PGND with pins 12 and 13 shorted on PCB. |+| 13 | VIN | power_in | Input supply voltage with nominal range 3.9 V to 36 V and 42 V transient peak; connect bypass capacitors to PGND with pins 12 and 13 shorted on PCB. |+| 14 | N/C | unconnected | No electrical connection to the device. |+| 15 | PGND | power_in | Power ground for internal low-side MOSFET with voltage offset -0.3 V to +0.3 V to AGND; connect pins 15 and 16 together on PCB to system ground. |+| 16 | PGND | power_in | Power ground for internal low-side MOSFET with voltage offset -0.3 V to +0.3 V to AGND; connect pins 15 and 16 together on PCB to system ground. |+| 17 | EP | power_in | Exposed die attach thermal pad for heat sinking and ground connection; connect to ground plane with minimum 4×4 array of 10 mil thermal vias. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-16-EP |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `LM536035QPWPTQ1`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `lm536035qpwptq1-etched.step` / `lm536035qpwptq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm536035qpwptq1.step` / `lm536035qpwptq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm53602-q1) (42 pp, sha256 `b2d0d78814aaf2aa`, retrieved 2026-09-25, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm536035qpwptq1-datasheet.pdf)
page.jsonadded+210
@@ -0,0 +1,210 @@+{+  "slug": "lm536035qpwptq1",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm536035qpwptq1",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm536035qpwptq1.kicad_sym",+    "lm536035qpwptq1.kicad_mod",+    "lm536035qpwptq1.glb",+    "lm536035qpwptq1.step",+    "lm536035qpwptq1.lbr",+    "docs/hero.png",+    "docs/lm536035qpwptq1-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM536035QPWPTQ1",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-16-EP",+    "pin_count": 17,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm53602-q1",+    "parts": {+      "symbol": "lm536035qpwptq1.kicad_sym",+      "footprint": "lm536035qpwptq1.kicad_mod",+      "model_3d": "lm536035qpwptq1-etched.glb",+      "model_3d_plain": "lm536035qpwptq1.glb",+      "model_3d_step": "lm536035qpwptq1-etched.step",+      "model_3d_step_plain": "lm536035qpwptq1.step",+      "lbr": "lm536035qpwptq1.lbr"+    },+    "distributor_links": {+      "lcsc": "C2073259",+      "digikey": "296-42429-2-ND",+      "mouser": "595-LM536035QPWPTQ1"+    },+    "distributor_check": {+      "checked_at": "2026-09-25T14:12:07Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-42429-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-LM536035QPWPTQ1",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "SW",+        "type": "output",+        "description": "Regulator switch node with voltage range -0.3 V to VIN+0.3 V; connect pins 1 and 2 together on PCB to power inductor."+      },+      {+        "number": "2",+        "name": "SW",+        "type": "output",+        "description": "Regulator switch node with voltage range -0.3 V to VIN+0.3 V; connect pins 1 and 2 together on PCB to power inductor."+      },+      {+        "number": "3",+        "name": "CBOOT",+        "type": "power_in",+        "description": "Bootstrap supply input for high-side gate driver with voltage range -0.3 V to 3.6 V; connect 470 nF capacitor to SW."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "Internal 3.15 V regulator output with voltage range -0.3 V to 4.2 V supplying internal control circuits; connect 3.3 µF capacitor to GND."+      },+      {+        "number": "5",+        "name": "BIAS",+        "type": "input",+        "description": "Input to internal LDO voltage regulator with voltage range -0.3 V to 16 V; connect to output voltage with 0.1 µF capacitor to GND."+      },+      {+        "number": "6",+        "name": "SYNC",+        "type": "input",+        "description": "Synchronization input to regulator with voltage range -0.3 V to 5.5 V and logic thresholds VIH=1.5 V, VIL=0.4 V; ground when not used."+      },+      {+        "number": "7",+        "name": "FPWM",+        "type": "input",+        "description": "Mode control input for forced PWM (high) or auto mode (low) with voltage range -0.3 V to 5.5 V and logic thresholds VIH=1.5 V, VIL=0.4 V."+      },+      {+        "number": "8",+        "name": "RESET",+        "type": "output",+        "description": "Open-drain reset output with voltage range -0.3 V to 8 V and maximum 1 mA current; high indicates power OK, low indicates fault or EN low."+      },+      {+        "number": "9",+        "name": "FB",+        "type": "input",+        "description": "Feedback input to regulator with voltage range -0.3 V to 16 V (fixed modes) or -0.3 V to 5.5 V (ADJ option); connect to output voltage for fixed or divider tap for ADJ."+      },+      {+        "number": "10",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground reference with voltage offset ±0.3 V to PGND (±2 V transient tolerance); connect to EP and PGND on PCB."+      },+      {+        "number": "11",+        "name": "EN",+        "type": "input",+        "description": "Enable input with voltage range -0.3 V to 40 V; rising threshold 2 V for ON, falling threshold 0.8 V for complete shutdown."+      },+      {+        "number": "12",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage with nominal range 3.9 V to 36 V and 42 V transient peak; connect bypass capacitors to PGND with pins 12 and 13 shorted on PCB."+      },+      {+        "number": "13",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage with nominal range 3.9 V to 36 V and 42 V transient peak; connect bypass capacitors to PGND with pins 12 and 13 shorted on PCB."+      },+      {+        "number": "14",+        "name": "N/C",+        "type": "unconnected",+        "description": "No electrical connection to the device."+      },+      {+        "number": "15",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground for internal low-side MOSFET with voltage offset -0.3 V to +0.3 V to AGND; connect pins 15 and 16 together on PCB to system ground."+      },+      {+        "number": "16",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground for internal low-side MOSFET with voltage offset -0.3 V to +0.3 V to AGND; connect pins 15 and 16 together on PCB to system ground."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "power_in",+        "description": "Exposed die attach thermal pad for heat sinking and ground connection; connect to ground plane with minimum 4×4 array of 10 mil thermal vias."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 42,+        "cost_usd": 0.4124,+        "at": "2026-09-25T14:11:44"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm53602-q1",+        "pages": 42,+        "sha256": "b2d0d78814aaf2aa",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file