← Commit history

lm5175pwpr: factory component page (tier=mfr)

Ray ·c9cbb900da · ·parent 78de6ab
1 file changed +242−8
page.json+242−8
@@ -1,13 +1,252 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lm5175pwpr",+  "title": "LM5175PWPR",+  "brief": "Texas Instruments DC-DC Converters, HTSSOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments DC-DC Converters, HTSSOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "lm5175pwpr"   ],+  "component": {+    "mpn": "LM5175PWPR",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-28",+    "pin_count": 29,+    "category": "PMIC",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/lit/ds/symlink/lm5175pwpr.pdf",+    "parts": {+      "symbol": "lm5175pwpr.kicad_sym",+      "footprint": "lm5175pwpr.kicad_mod",+      "model_3d": "lm5175pwpr.glb",+      "model_3d_step": "lm5175pwpr.step",+      "lbr": "lm5175pwpr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "EN/UVLO",+        "type": "input",+        "description": "Enable / undervoltage lockout input. EN/UVLO < 0.4 V: shutdown. 0.7 V < EN/UVLO < 1.23 V: standby (VCC regulator on, PWM off). EN/UVLO > 1.23 V: PWM enabled (provided VCC exceeds its UV threshold)."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply pin to the IC. Connect to a supply voltage between 3.5 V and 42 V (60 V absolute max)."+      },+      {+        "number": "3",+        "name": "VISNS",+        "type": "input",+        "description": "VIN sense input. Connect to the input capacitor."+      },+      {+        "number": "4",+        "name": "MODE",+        "type": "input",+        "description": "Operating mode select via RMODE resistor to GND or VCC. Options: GND=DCM/hiccup disabled; 49.9 k\u03a9 to GND=DCM/hiccup enabled; 93.1 k\u03a9 to GND=CCM/hiccup enabled; tied to VCC=CCM/hiccup disabled."+      },+      {+        "number": "5",+        "name": "DITH",+        "type": "input",+        "description": "Dithering programming pin. A capacitor between DITH and AGND is charged/discharged by a 10 \u00b5A current source, modulating fSW by \u00b15%. Ground DITH to disable dithering; in external sync mode DITH is ignored."+      },+      {+        "number": "6",+        "name": "RT/SYNC",+        "type": "input",+        "description": "Switching-frequency programming / external clock sync pin. Resistor from RT/SYNC to AGND sets fSW (100-600 kHz); can also be driven by an external clock for synchronization."+      },+      {+        "number": "7",+        "name": "SLOPE",+        "type": "passive",+        "description": "Slope-compensation programming pin. A capacitor between SLOPE and AGND provides the slope-compensation ramp for stable current-mode operation in both buck and boost modes."+      },+      {+        "number": "8",+        "name": "SS",+        "type": "passive",+        "description": "Soft-start programming pin. A capacitor between SS and AGND programs the soft-start time (charged by ~5.65 \u00b5A)."+      },+      {+        "number": "9",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output. External RC network between COMP and AGND compensates the regulator feedback loop."+      },+      {+        "number": "10",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground reference for the IC. Tie to the system ground plane; also the return for the exposed PowerPAD."+      },+      {+        "number": "11",+        "name": "FB",+        "type": "input",+        "description": "Feedback pin for output voltage regulation. Connect a resistor divider from VOUT to FB; internal reference is 0.800 V. OVP triggers at ~0.86 V, PGOOD window \u00b110%."+      },+      {+        "number": "12",+        "name": "VOSNS",+        "type": "input",+        "description": "VOUT sense input. Connect to the output capacitor for output-side sensing."+      },+      {+        "number": "13",+        "name": "ISNS(-)",+        "type": "input",+        "description": "Negative input of the average current-sense amplifier. Used with ISNS(+) across an optional current-sense resistor on the input or output side for constant-current (CC) control. Short ISNS(+) and ISNS(-) together to disable."+      },+      {+        "number": "14",+        "name": "ISNS(+)",+        "type": "input",+        "description": "Positive input of the average current-sense amplifier. CC loop activates when VISNS(+)-ISNS(-) reaches ~50 mV (average current-limit target)."+      },+      {+        "number": "15",+        "name": "CSG",+        "type": "input",+        "description": "Negative (ground) input of the PWM current-sense amplifier. Connect directly to the low-side ground of the current-sense resistor."+      },+      {+        "number": "16",+        "name": "CS",+        "type": "input",+        "description": "Positive input to the PWM current-sense amplifier. Senses inductor/switch current for cycle-by-cycle peak current-mode control."+      },+      {+        "number": "17",+        "name": "PGOOD",+        "type": "output",+        "description": "Power-Good open-drain output. Pulled low when FB is outside a 0.8 V \u00b110% regulation window. Sink capability ~4.2 mA at 0.4 V; requires external pull-up."+      },+      {+        "number": "18",+        "name": "SW2",+        "type": "power_out",+        "description": "Boost-side switching node. Connect to the inductor and the source of the high-side boost MOSFET / drain of the low-side boost MOSFET. Also the SW reference for BOOT2/HDRV2."+      },+      {+        "number": "19",+        "name": "HDRV2",+        "type": "output",+        "description": "High-side gate-driver output for the boost-side MOSFET. Peak source/sink ~1.8 A / 2.2 A; connect directly to the MOSFET gate."+      },+      {+        "number": "20",+        "name": "BOOT2",+        "type": "power_in",+        "description": "Bootstrap supply for the boost-side high-side gate driver. Connect a capacitor between BOOT2 and SW2; 68 V absolute max to GND."+      },+      {+        "number": "21",+        "name": "LDRV2",+        "type": "output",+        "description": "Low-side gate-driver output for the boost-side MOSFET. Connect directly to the MOSFET gate; referenced to PGND."+      },+      {+        "number": "22",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground of the IC. High-current ground return for the low-side gate drivers."+      },+      {+        "number": "23",+        "name": "VCC",+        "type": "power_out",+        "description": "Output of the internal VCC bias regulator (~7.35 V typ). Bypass with a capacitor to ground; supplies the gate drivers and internal analog."+      },+      {+        "number": "24",+        "name": "BIAS",+        "type": "power_in",+        "description": "Optional input to the VCC bias regulator. Powering VCC from an external supply (rather than VIN) reduces power loss at high VIN. For VBIAS > ~8 V the VCC regulator draws from BIAS. VBIAS must not exceed 40 V."+      },+      {+        "number": "25",+        "name": "LDRV1",+        "type": "output",+        "description": "Low-side gate-driver output for the buck-side MOSFET. Connect directly to the MOSFET gate; referenced to PGND."+      },+      {+        "number": "26",+        "name": "BOOT1",+        "type": "power_in",+        "description": "Bootstrap supply for the buck-side high-side gate driver. Connect a capacitor between BOOT1 and SW1; 68 V absolute max to GND."+      },+      {+        "number": "27",+        "name": "HDRV1",+        "type": "output",+        "description": "High-side gate-driver output for the buck-side MOSFET. Peak source/sink ~1.8 A / 2.2 A; connect directly to the MOSFET gate."+      },+      {+        "number": "28",+        "name": "SW1",+        "type": "power_out",+        "description": "Buck-side switching node. Connect to the inductor and the source of the buck-side high-side MOSFET / drain of the buck-side low-side MOSFET. Also the SW reference for BOOT1/HDRV1."+      },+      {+        "number": "29",+        "name": "PAD",+        "type": "power_in",+        "description": "Exposed thermal PowerPAD on the underside of the HTSSOP-28 package. Solder to the analog ground copper pour and use thermal vias to an internal ground plane for heat dissipation."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/lm5175pwpr.pdf",+        "pages": 42,+        "sha256": "c2cf8e014f0da459",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 29,+        "described": 29,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "HTSSOP-28",+      "Category": "PMIC",+      "Pins": "29"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lm5175pwpr"+  ],+  "discovery_pitch": "LM5175PWPR (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +264,5 @@     "docs/lm5175pwpr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file