← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# LM5164DDAR++**Texas Instruments** · DC-DC Converters · SO-8-EP++LM5164DDAR from Texas Instruments, in a SO-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground connection for internal circuits. Solder the exposed pad (EP) to this pin and connect to a large copper plane to reduce thermal resistance. |+| 2 | VIN | power_in | Regulator supply input pin to the high-side power MOSFET and internal bias regulator. Operating range 6 V to 100 V (absolute max 100 V). Connect directly to the input supply of the buck converter with short, low-impedance paths. |+| 3 | EN/UVLO | input | Precision enable and undervoltage lockout (UVLO) programming pin. Below 1.1 V the converter is in shutdown with all functions disabled; between 1.1 V and 1.5 V it is in standby with internal VCC operational and no switching; above 1.5 V (typ) the start-up sequence begins. |+| 4 | RON | input | On-time programming pin. A resistor between this pin and GND sets the buck switch on-time (programmable range ~50 ns to 10000 ns). |+| 5 | FB | input | Feedback input of the voltage regulation comparator. Regulates to VREF = 1.2 V (typ) via an external resistor divider from VOUT. |+| 6 | PGOOD | output | Power good indicator, open-drain output. Connect to a source voltage through an external pull-up resistor between 10 kΩ and 100 kΩ. Internal pull-down resistance ~30 Ω. |+| 7 | BST | power_in | Bootstrap gate-drive supply. Requires a 2.2-nF 50-V X7R ceramic capacitor between BST and SW to bias the internal high-side gate driver. BST-to-SW absolute max is 5.5 V. |+| 8 | SW | passive | Switching node internally connected to the source of the high-side NMOS buck switch and the drain of the low-side NMOS synchronous rectifier. Connect to the switching node of the power inductor. High-side RDSON ~0.725 Ω, low-side RDSON ~0.34 Ω. |+| EP | EP | power_in | Exposed pad of the package. No internal electrical connection. Solder the EP to the GND pin and connect to a large copper plane to reduce thermal resistance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SO-8-EP |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++- `LM5164DDAR`++## CAD (KiCad official)++- Symbol: `LM5164DDAR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SO-8-EP (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm5164ddar.pdf) (35 pp, sha256 `7fe36c48561a3b2c`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5164ddar-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lm5164ddar",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, SO-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "lm5164ddar"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm5164ddar.kicad_sym",+ "lm5164ddar.kicad_mod",+ "lm5164ddar.glb",+ "lm5164ddar.step",+ "lm5164ddar.lbr",+ "docs/hero.png",+ "docs/lm5164ddar-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}