← Commit history

Publish 0.1.1

Ray ·9d774564a7 · ·parent e3e0575
4 files changed +599−41
lm5122mh-hero.glbadded
⋯ 1 unchanged line ⋯
lm5122mh-hero.overlay.jsonadded+537
@@ -0,0 +1,537 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "LM5122MH",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 21,+      "span_mm": 9.2,+      "dash_mm": 0.23,+      "gap_mm": 0.138,+      "pad_stroke_mm": 0.0552+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 3,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 20,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.58,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.205,+      3.205,+      -3.075,+      3.075+    ],+    "pads_bbox_mm": [+      -3.625,+      3.625,+      -3.125,+      3.125+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "lm5122mh-etched.glb",+    "glb_sha256": "de689cc9339a09ebfd521e11e7d16d1d492e4abc0f7e4a3a50dd3364d867e4b3",+    "footprint": "lm5122mh.kicad_mod",+    "footprint_sha256": "67d5d3fffa56b501ab023130eba99e0ca4408b552c9ea891778c8a79f13b6163",+    "pins": "page.json component.pins",+    "pins_sha256": "4fdd30cd07776624e37905290567cf1b6030309beaf5ce01339bc57b13c4e369"+  },+  "generator": "adom-wiki 1.8.25 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "SYNCOUT",+      "x": -4.32,+      "y": -2.925,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "2",+      "text": "OPT",+      "x": -3.725,+      "y": -2.275,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "3",+      "text": "CSN",+      "x": -3.725,+      "y": -1.625,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "4",+      "text": "CSP",+      "x": -3.725,+      "y": -0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "5",+      "text": "VIN",+      "x": -3.725,+      "y": -0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "6",+      "text": "UVLO",+      "x": -3.725,+      "y": 0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "7",+      "text": "SS",+      "x": -3.725,+      "y": 0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "8",+      "text": "SYNCIN/RT",+      "x": -3.725,+      "y": 1.625,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "9",+      "text": "AGND",+      "x": -3.725,+      "y": 2.275,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "10",+      "text": "FB",+      "x": -3.725,+      "y": 2.925,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "11",+      "text": "COMP",+      "x": 3.725,+      "y": 2.925,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "12",+      "text": "SLOPE",+      "x": 3.725,+      "y": 2.275,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "13",+      "text": "MODE",+      "x": 3.725,+      "y": 1.625,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "14",+      "text": "RES",+      "x": 3.725,+      "y": 0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "15",+      "text": "PGND",+      "x": 3.725,+      "y": 0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "16",+      "text": "LO",+      "x": 3.725,+      "y": -0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "17",+      "text": "VCC",+      "x": 3.725,+      "y": -0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "18",+      "text": "SW",+      "x": 3.725,+      "y": -1.625,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "19",+      "text": "HO",+      "x": 3.725,+      "y": -2.275,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "20",+      "text": "BST",+      "x": 3.725,+      "y": -2.925,+      "align": "left",+      "vertical": false,+      "h": 0.325+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        -2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        -2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        -1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        -0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        -0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        -0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        -0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        -1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        -2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        -2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "rect",+      "center_mm": [+        0.0,+        0.0+      ],+      "size_mm": [+        2.15,+        3.35+      ],+      "rot": 0.0+    }+  ]+}
package.json+53−35
@@ -1,6 +1,6 @@ {   "slug": "lm5122mh",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -26,7 +26,10 @@     "docs/hero.png",     "docs/lm5122mh-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "lm5122mh-etched.step",+    "lm5122mh-hero.glb",+    "lm5122mh-hero.overlay.json"   ],   "component": {     "mpn": "LM5122MH",@@ -49,7 +52,7 @@       "lcsc": "C2859988"     },     "distributor_check": {-      "checked_at": "2026-10-01T18:01:13Z",+      "checked_at": "2026-10-01T18:23:54Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -65,121 +68,121 @@         "number": "1",         "name": "SYNCOUT",         "type": "output",-        "description": "Clock output pin providing 180° phase shift (3.3-4.3V high level) for interleaved multi-phase boost converter operation; can be left floating when not used."+        "description": "Clock output pin providing 180° phase-shifted clock for interleaved multi-phase operation."       },       {         "number": "2",         "name": "OPT",         "type": "input",-        "description": "Master/slave configuration and SYNCOUT enable control input; voltage >2.7V enables master2 mode and disables SYNCOUT; must not be left floating."+        "description": "Clock synchronization selection pin enabling/disabling SYNCOUT for master/slave configuration."       },       {         "number": "3",         "name": "CSN",         "type": "input",-        "description": "Inverting input to 10V/V current sense amplifier; connect to negative terminal of current sense resistor."+        "description": "Inverting input of current sense amplifier, connect to negative terminal of current sense resistor."       },       {         "number": "4",         "name": "CSP",         "type": "input",-        "description": "Non-inverting input to 10V/V current sense amplifier with 75-mV cycle-by-cycle current limit threshold; operating range 3-65V common-mode."+        "description": "Non-inverting input of current sense amplifier, connect to positive terminal of current sense resistor."       },       {         "number": "5",         "name": "VIN",         "type": "power_in",-        "description": "Input supply voltage source (3V at soft-start, 4.5-65V operating range) for internal VCC regulator and power stage with 9μA shutdown current."+        "description": "Supply voltage input for VCC regulator, operating range 4.5V to 65V with 3V minimum after startup."       },       {         "number": "6",         "name": "UVLO",         "type": "input",-        "description": "Programmable undervoltage lockout with three operational modes: <0.4V shutdown, 0.4-1.2V standby with VCC regulator active, >1.2V startup and normal operation; internal 10μA hysteresis current."+        "description": "Undervoltage lockout programming pin providing shutdown below 0.4V and standby mode below 1.2V threshold."       },       {         "number": "7",         "name": "SS",         "type": "input",-        "description": "Soft-start capacitor programming input with internal 10μA charging current source and pulldown discharge switch for gradual voltage ramp control."+        "description": "Soft-start programming pin controlled by internal 10-μA current source setting error amplifier ramp rate."       },       {         "number": "8",         "name": "SYNCIN/RT",         "type": "input",-        "description": "Resistor-programmed oscillator frequency input (1.2V reference, 400-975kHz adjustable range) and external synchronization clock input accepting 100ns minimum pulse width."+        "description": "Oscillator frequency programming resistor connection or external synchronization pulse input up to 1MHz."       },       {         "number": "9",         "name": "AGND",         "type": "power_in",-        "description": "Analog ground connection serving as return path for internal voltage reference, error amplifier, and analog sensing circuits."+        "description": "Analog ground connection providing return for internal voltage reference and analog circuits."       },       {         "number": "10",         "name": "FB",         "type": "input",-        "description": "Feedback input to error amplifier with 1.2V regulation threshold; resistor divider programs output voltage; FB >2.7V at startup enables slave-mode."+        "description": "Feedback inverting input of error amplifier with 1.2V regulation threshold for output voltage control."       },       {         "number": "11",         "name": "COMP",         "type": "output",-        "description": "Error amplifier output (0.25V low to 3.4V high depending on VCC supply) for Type 2 feedback compensation network connection to FB pin."+        "description": "Error amplifier output for connection to loop compensation network between COMP and FB pins."       },       {         "number": "12",         "name": "SLOPE",         "type": "input",-        "description": "Slope compensation resistor programming input (1.2V reference, 1.4-1.9V signal amplitude) for sub-harmonic oscillation elimination at duty cycles above 50%."+        "description": "Slope compensation programming pin controlled by single resistor between SLOPE and AGND."       },       {         "number": "13",         "name": "MODE",         "type": "input",-        "description": "Switching mode control with 1.2V threshold; >1.2V enables forced-PWM with reverse conduction allowed, <1.2V enables diode-emulation mode with optional skip-cycle."+        "description": "Switching mode selection pin determining forced PWM mode above 1.2V or diode emulation mode below 1.2V."       },       {         "number": "14",         "name": "RES",         "type": "output",-        "description": "Restart timer capacitor programming pin with 1.2V restart threshold and 30μA fault-state charging current for hiccup-mode overload protection; connect to AGND if not used."+        "description": "Restart timer pin for external capacitor configuring hiccup mode off-time and reload delay."       },       {         "number": "15",         "name": "PGND",         "type": "power_in",-        "description": "Power ground connection for low-side MOSFET gate driver; must be directly connected to low-side MOSFET source terminal for proper adaptive dead-time operation."+        "description": "Power ground connection for low-side MOSFET driver, connect directly to low-side switch source."       },       {         "number": "16",         "name": "LO",         "type": "output",-        "description": "Low-side N-channel MOSFET gate driver output with 0.1-0.25V on-state voltage drop, 3.2A peak sink current, and 50-145ns adaptive dead-time delay."+        "description": "Low-side MOSFET gate drive output with robust 3A integrated driver through short, low-inductance path."       },       {         "number": "17",         "name": "VCC",-        "type": "power_in",-        "description": "Regulated 7.6V bias supply output with 50-62mA current sourcing limit, 0.25-0.5V dropout from VIN, and 3.9-4.1V rising undervoltage threshold for driver operation."+        "type": "power_out",+        "description": "VCC bias supply pin providing regulated 6.9V to 8.3V from internal regulator, locally decouple to PGND."       },       {         "number": "18",         "name": "SW",         "type": "bidirectional",-        "description": "Boost converter switching node (-5V to +105V voltage rating) where bootstrap capacitor, high-side MOSFET source, and low-side MOSFET drain connect through low inductance paths."+        "description": "Switching node of boost regulator connected to bootstrap capacitor and both high-side and low-side switches."       },       {         "number": "19",         "name": "HO",         "type": "output",-        "description": "High-side N-channel MOSFET gate driver output with 0.15-0.24V source voltage drop, 3.2A peak source current, and operation from 3.8-14V bootstrap supply."+        "description": "High-side MOSFET gate drive output with robust 3A integrated driver through short, low-inductance path."       },       {         "number": "20",         "name": "BST",         "type": "power_in",-        "description": "Bootstrap supply node (3.8-14V operating range, 5.3-9V SW-referenced regulation) for high-side gate driver, charged via external diode with internal 200μA charge pump for bypass mode."+        "description": "Bootstrap supply for high-side gate driver, connect to bootstrap diode cathode and capacitor."       },       {         "number": "21",@@ -189,19 +192,19 @@       }     ],     "provenance": {-      "extractor": "extract_pins 0.2",+      "extractor": "extract_pins 0.3",       "factory_chain": {         "factory": "2.0.0",-        "extractor": "extract_pins 0.2",+        "extractor": "extract_pins 0.3",         "primary_model": "claude-haiku-4-5-20251001",         "primary_mode": "text",-        "consensus_model": "claude-sonnet-4-6",+        "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [],-        "pages_sent": 57,-        "cost_usd": 0.6152,-        "at": "2026-10-01T18:00:50"+        "pages_sent": 11,+        "cost_usd": 0.3199,+        "at": "2026-10-01T18:23:37"       },       "datasheet": {         "url": "https://www.ti.com/cn/lit/gpn/lm5122",@@ -234,8 +237,8 @@           6.5,           1.2         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "154ad4ddbecc61b0b23331dd2bbd83d64be310597cd524f32a76caf1cd1bb48d",         "checked": "2026-10-07",@@ -253,13 +256,28 @@           6.5,           1.2         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "54db6ff17df3bec8a27c8410ddc0d4103321151c9609893a07a1eb9558a642d6",         "checked": "2026-10-16",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]-  }+  },+  "title": "LM5122MH",+  "brief": "Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "HTSSOP-20-EP",+      "Category": "Power Management (PMIC)",+      "Pins": "21"+    }+  },+  "discovery_triggers": [+    "lm5122mh"+  ],+  "discovery_pitch": "LM5122MH (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",+  "visibility": "public" }
page.json+9−6
@@ -4,7 +4,7 @@   "slug": "lm5122mh",   "title": "LM5122MH",   "brief": "Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -286,9 +286,12 @@     "docs/hero.png",     "docs/lm5122mh-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "lm5122mh-etched.step",+    "lm5122mh-hero.glb",+    "lm5122mh-hero.overlay.json"   ],-  "visibility": {-    "public": true-  }-}+  "visibility": "public",+  "description": "Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file