component
LM5106MM
Public Made by Adomby adom
Texas Instruments Gate Drivers, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+46@@ -0,0 +1,46 @@+# LM5106MM++**Texas Instruments** · Gate Drivers · VSSOP-10-0.5mm++LM5106MM from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Positive gate drive supply with recommended operating voltage 8-14 V; decouple to VSS using a low ESR/ESL capacitor placed as close to the IC as possible. |+| 2 | HB | power_in | Bootstrap supply positive rail; connect positive terminal of bootstrap capacitor here with voltage relative to HS of 8-14 V. |+| 3 | HO | output | High-side gate driver output; connect to the gate of the high-side N-MOS device through a short, low inductance path. |+| 4 | HS | power_in | High-side MOSFET source node and bootstrap capacitor negative terminal connection; voltage floats from -1 to 100 V relative to VSS. |+| 5 | NC | unconnected | Not connected; no internal connection to the die. |+| 6 | RDT | input | Dead-time programming input; connect resistor from RDT to VSS to program the turnon delay of both MOSFETs with voltage range -0.3 to 5 V. |+| 7 | EN | input | TTL-compatible logic input for driver enable/disable with hysteresis; LO and HO held in low state when EN is low. |+| 8 | IN | input | TTL-compatible logic input for gate driver control with hysteresis; high-side MOSFET turned on and low-side turned off when IN is high. |+| 9 | VSS | power_in | Ground return; all signals are referenced to this ground. |+| 10 | LO | output | Low-side gate driver output; connect to the gate of the low-side N-MOS device through a short, low inductance path. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-10-0.5mm |+| Category | Motor Driver ICs |+| Pins | 10 |++## CAD (KiCad official)++- Symbol: `LM5106MM`+- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`+- 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)+- 3D model files: `lm5106mm-etched.step` / `lm5106mm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5106mm.step` / `lm5106mm.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5106) (28 pp, sha256 `1e623b370d6f5134`, retrieved 2026-10-03, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5106mm-datasheet.pdf)
page.jsonadded+173@@ -0,0 +1,173 @@+{+ "slug": "lm5106mm",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Gate Drivers, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "lm5106mm",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm5106mm.kicad_sym",+ "lm5106mm.kicad_mod",+ "lm5106mm.glb",+ "lm5106mm.step",+ "lm5106mm.lbr",+ "docs/hero.png",+ "docs/lm5106mm-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lm5106mm-hero.glb",+ "lm5106mm-hero.overlay.json"+ ],+ "component": {+ "mpn": "LM5106MM",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-10-0.5mm",+ "pin_count": 10,+ "category": "Motor Driver ICs",+ "subcategory": "Gate Drivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm5106",+ "parts": {+ "symbol": "lm5106mm.kicad_sym",+ "footprint": "lm5106mm.kicad_mod",+ "model_3d": "lm5106mm-hero.glb",+ "model_3d_plain": "lm5106mm.glb",+ "model_3d_step": "lm5106mm-etched.step",+ "model_3d_step_plain": "lm5106mm.step",+ "lbr": "lm5106mm.lbr"+ },+ "distributor_links": {+ "lcsc": 544493,+ "digikey": "LM5106MMTR-ND",+ "mouser": "926-LM5106MM"+ },+ "distributor_check": {+ "checked_at": "2026-10-03T01:10:52Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "LM5106MMTR-ND",+ "status": "found",+ "lifecycle": "Obsolete"+ },+ "mouser": {+ "pn": "926-LM5106MM",+ "status": "found",+ "lifecycle": "Obsolete"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive gate drive supply with recommended operating voltage 8-14 V; decouple to VSS using a low ESR/ESL capacitor placed as close to the IC as possible."+ },+ {+ "number": "2",+ "name": "HB",+ "type": "power_in",+ "description": "Bootstrap supply positive rail; connect positive terminal of bootstrap capacitor here with voltage relative to HS of 8-14 V."+ },+ {+ "number": "3",+ "name": "HO",+ "type": "output",+ "description": "High-side gate driver output; connect to the gate of the high-side N-MOS device through a short, low inductance path."+ },+ {+ "number": "4",+ "name": "HS",+ "type": "power_in",+ "description": "High-side MOSFET source node and bootstrap capacitor negative terminal connection; voltage floats from -1 to 100 V relative to VSS."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected; no internal connection to the die."+ },+ {+ "number": "6",+ "name": "RDT",+ "type": "input",+ "description": "Dead-time programming input; connect resistor from RDT to VSS to program the turnon delay of both MOSFETs with voltage range -0.3 to 5 V."+ },+ {+ "number": "7",+ "name": "EN",+ "type": "input",+ "description": "TTL-compatible logic input for driver enable/disable with hysteresis; LO and HO held in low state when EN is low."+ },+ {+ "number": "8",+ "name": "IN",+ "type": "input",+ "description": "TTL-compatible logic input for gate driver control with hysteresis; high-side MOSFET turned on and low-side turned off when IN is high."+ },+ {+ "number": "9",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground return; all signals are referenced to this ground."+ },+ {+ "number": "10",+ "name": "LO",+ "type": "output",+ "description": "Low-side gate driver output; connect to the gate of the low-side N-MOS device through a short, low inductance path."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 7,+ "cost_usd": 0.0924,+ "at": "2026-10-03T01:10:31"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm5106",+ "pages": 28,+ "sha256": "1e623b370d6f5134",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 10,+ "described": 10,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}