component
LM5088MHX-2
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -44,13 +44,13 @@ "number": "2", "name": "EN", "type": "input",- "description": "Enable input with tri-level control: below 0.4 V shutdown, 0.4 V to 1.2 V standby mode, above 1.2 V operational, with 5-\u00b5A internal pull-up current."+ "description": "Enable input with tri-level control: below 0.4 V shutdown, 0.4 V to 1.2 V standby mode, above 1.2 V operational, with 5-µA internal pull-up current." }, { "number": "3", "name": "SS", "type": "input",- "description": "Soft start input; internal 11-\u00b5A current source charges external capacitor, with 1.2 V reference and 120 mV clamp above FB voltage."+ "description": "Soft start input; internal 11-µA current source charges external capacitor, with 1.2 V reference and 120 mV clamp above FB voltage." }, { "number": "4",@@ -80,7 +80,7 @@ "number": "8", "name": "FB", "type": "input",- "description": "Feedback signal input to inverting input of error amplifier with 1.205 V regulation threshold and \u00b118 nA maximum input bias current."+ "description": "Feedback signal input to inverting input of error amplifier with 1.205 V regulation threshold and ±18 nA maximum input bias current." }, { "number": "9",@@ -92,7 +92,7 @@ "number": "10", "name": "RES", "type": "output",- "description": "Restart timer output for hiccup mode (LM5088-2 only); external capacitor sets restart delay with 50-\u00b5A charge and 25-\u00b5A discharge current sources, 1.2 V upper and 0.2 V lower thresholds."+ "description": "Restart timer output for hiccup mode (LM5088-2 only); external capacitor sets restart delay with 50-µA charge and 25-µA discharge current sources, 1.2 V upper and 0.2 V lower thresholds." }, { "number": "11",@@ -122,13 +122,13 @@ "number": "15", "name": "BOOT", "type": "passive",- "description": "Bootstrap capacitor connection; external 0.022 \u00b5F minimum ceramic capacitor required between BOOT and SW pins, charged from VCC via internal diode."+ "description": "Bootstrap capacitor connection; external 0.022 µF minimum ceramic capacitor required between BOOT and SW pins, charged from VCC via internal diode." }, { "number": "16", "name": "VCC", "type": "power_out",- "description": "Bias regulator output; 7.8 V typical regulation from VIN with 30 mA internal current limit, requires 0.1 \u00b5F to 10 \u00b5F ceramic decoupling capacitor."+ "description": "Bias regulator output; 7.8 V typical regulation from VIN with 30 mA internal current limit, requires 0.1 µF to 10 µF ceramic decoupling capacitor." }, { "number": "17",@@ -214,5 +214,8 @@ "docs/lm5088mhx-2-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }