← Commit history

Initial commit: component/lm5085qmyx

Ray ·cc74f6dd4a ·
2 files changed +207
README.mdadded+45
@@ -0,0 +1,45 @@+# LM5085QMYX++**Texas Instruments** · DC-DC Converters · MSOP-8-EP++LM5085QMYX from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ADJ | input | Current Limit Adjust input; the current limit threshold is set by an external resistor from VIN to ADJ in conjunction with the external sense resistor or the PFET's RDS(ON). |+| 2 | RT | input | On-Time Control and Shutdown input; an external resistor from VIN to RT sets the buck switch on-time and switching frequency, or grounding this pin shuts down the controller. |+| 3 | FB | input | Voltage Feedback input to the regulation and over-voltage comparators with regulation level of 1.25V. |+| 4 | GND | power_in | Circuit Ground reference for all internal circuitry. |+| 5 | ISEN | input | Current Sense Input for current limit detection; connect to the PFET drain when using RDS(ON) current sense or to the PFET source and sense resistor when using a current sense resistor. |+| 6 | PGATE | output | Gate Driver Output that swings between VIN when Q1 is off and VCC when Q1 is on; connect to the gate of the external PFET. |+| 7 | VCC | power_out | Output of the negative voltage regulator (relative to VIN) that biases the PFET gate driver; a low ESR capacitor is required from VIN to VCC located close to the pins. |+| 8 | VIN | power_in | Input Supply Voltage with operating input range from 4.5V to 75V; a low ESR bypass capacitor must be located as close as possible to the VIN and GND pins. |+| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-8-EP |+| Category | Power Management (PMIC) |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `LM5085QMYX`+- Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm`+- 3D model: MSOP-8-EP (KiCad packages3D, STEP)+- 3D model files: `lm5085qmyx-etched.step` / `lm5085qmyx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5085qmyx.step` / `lm5085qmyx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5085-q1) (39 pp, sha256 `5a34a0aa7ad4c733`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5085qmyx-datasheet.pdf)
page.jsonadded+162
@@ -0,0 +1,162 @@+{+  "slug": "lm5085qmyx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm5085qmyx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm5085qmyx.kicad_sym",+    "lm5085qmyx.kicad_mod",+    "lm5085qmyx.glb",+    "lm5085qmyx.step",+    "lm5085qmyx.lbr",+    "docs/hero.png",+    "docs/lm5085qmyx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM5085QMYX",+    "manufacturer": "Texas Instruments",+    "package": "MSOP-8-EP",+    "pin_count": 9,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5085-q1",+    "parts": {+      "symbol": "lm5085qmyx.kicad_sym",+      "footprint": "lm5085qmyx.kicad_mod",+      "model_3d": "lm5085qmyx-etched.glb",+      "model_3d_plain": "lm5085qmyx.glb",+      "model_3d_step": "lm5085qmyx-etched.step",+      "model_3d_step_plain": "lm5085qmyx.step",+      "lbr": "lm5085qmyx.lbr"+    },+    "distributor_links": {+      "lcsc": "C1848487"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T06:15:26Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "ADJ",+        "type": "input",+        "description": "Current Limit Adjust input; the current limit threshold is set by an external resistor from VIN to ADJ in conjunction with the external sense resistor or the PFET's RDS(ON)."+      },+      {+        "number": "2",+        "name": "RT",+        "type": "input",+        "description": "On-Time Control and Shutdown input; an external resistor from VIN to RT sets the buck switch on-time and switching frequency, or grounding this pin shuts down the controller."+      },+      {+        "number": "3",+        "name": "FB",+        "type": "input",+        "description": "Voltage Feedback input to the regulation and over-voltage comparators with regulation level of 1.25V."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Circuit Ground reference for all internal circuitry."+      },+      {+        "number": "5",+        "name": "ISEN",+        "type": "input",+        "description": "Current Sense Input for current limit detection; connect to the PFET drain when using RDS(ON) current sense or to the PFET source and sense resistor when using a current sense resistor."+      },+      {+        "number": "6",+        "name": "PGATE",+        "type": "output",+        "description": "Gate Driver Output that swings between VIN when Q1 is off and VCC when Q1 is on; connect to the gate of the external PFET."+      },+      {+        "number": "7",+        "name": "VCC",+        "type": "power_out",+        "description": "Output of the negative voltage regulator (relative to VIN) that biases the PFET gate driver; a low ESR capacitor is required from VIN to VCC located close to the pins."+      },+      {+        "number": "8",+        "name": "VIN",+        "type": "power_in",+        "description": "Input Supply Voltage with operating input range from 4.5V to 75V; a low ESR bypass capacitor must be located as close as possible to the VIN and GND pins."+      },+      {+        "number": "9",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 9 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 12,+        "cost_usd": 0.144,+        "at": "2026-10-01T06:15:12"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm5085-q1",+        "pages": 39,+        "sha256": "5a34a0aa7ad4c733",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file