← Commit history

Initial commit: component/lm5032mtcx

Ray ·8369f76a04 ·
2 files changed +241
README.mdadded+52
@@ -0,0 +1,52 @@+# LM5032MTCX++**Texas Instruments** · DC-DC Converters · TSSOP-16++LM5032MTCX from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Input supply to the startup regulator with operating input range of 13V to 100V and transient capability to 105V. |+| 2 | COMP1 | input | PWM control input for Controller 1 providing voltage feedback to PWM comparator through 3:1 divider with internal 5-kΩ pull-up resistor to 5.0V for opto-coupler bias. |+| 3 | CS1 | input | Current sense input for Controller 1 for current mode control and cycle-by-cycle current limiting with 0.5V threshold, maximum voltage 1.25V. |+| 4 | SS1 | input | Soft-start input for Controller 1 with internal 50-µA charging current source, reduced to 1-µA during current limit restart, shutdown when forced below 0.5V. |+| 5 | UVLO | input | VIN under-voltage lockout input with 1.25V comparator reference, switched 20-µA current source for hysteresis, and controls maximum duty cycle. |+| 6 | VCC | power_out | Startup regulator output providing 7.7V regulated supply with current limit minimum of 19mA. |+| 7 | OUT1 | output | Main gate driver output for Controller 1 switching between VCC and GND1 at frequency equal to half oscillator frequency. |+| 8 | GND1 | power_in | Ground connection for Controller 1 including gate driver, PWM controller, soft-start and support functions. |+| 9 | GND2 | power_in | Ground connection for Controller 2 including gate driver, PWM controller and soft-start. |+| 10 | OUT2 | output | Main gate driver output for Controller 2 switching between VCC and GND2 at frequency equal to half oscillator frequency. |+| 11 | RES | input | Hiccup mode restart adjust input with external capacitor setting time delay before forced restart during sustained current limiting, threshold at 2.55V. |+| 12 | SS2 | input | Soft-start input for Controller 2 with internal 50-µA charging current source, reduced to 1-µA during current limit restart, shutdown when forced below 0.5V. |+| 13 | CS2 | input | Current sense input for Controller 2 for current mode control and cycle-by-cycle current limiting with 0.5V threshold, maximum voltage 1.25V. |+| 14 | COMP2 | input | PWM control input for Controller 2 providing voltage feedback to PWM comparator through 3:1 divider with internal 5-kΩ pull-up resistor to 5.0V for opto-coupler bias. |+| 15 | DCL | input | Duty cycle limit input with external resistor setting maximum allowed duty cycle at OUT1 and OUT2. |+| 16 | RT/SYNC | input | Oscillator frequency adjustment and synchronization input with external resistor setting oscillator frequency and accepting ac-coupled external synchronization pulses. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Power Management (PMIC) |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `LM5032MTCX`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `lm5032mtcx-etched.step` / `lm5032mtcx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5032mtcx.step` / `lm5032mtcx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5032) (36 pp, sha256 `7d2e1777413cf7ed`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5032mtcx-datasheet.pdf)
page.jsonadded+189
@@ -0,0 +1,189 @@+{+  "slug": "lm5032mtcx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm5032mtcx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm5032mtcx.kicad_sym",+    "lm5032mtcx.kicad_mod",+    "lm5032mtcx.glb",+    "lm5032mtcx.step",+    "lm5032mtcx.lbr",+    "docs/hero.png",+    "docs/lm5032mtcx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM5032MTCX",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5032",+    "parts": {+      "symbol": "lm5032mtcx.kicad_sym",+      "footprint": "lm5032mtcx.kicad_mod",+      "model_3d": "lm5032mtcx-etched.glb",+      "model_3d_plain": "lm5032mtcx.glb",+      "model_3d_step": "lm5032mtcx-etched.step",+      "model_3d_step_plain": "lm5032mtcx.step",+      "lbr": "lm5032mtcx.lbr"+    },+    "distributor_links": {+      "lcsc": "C527408"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply to the startup regulator with operating input range of 13V to 100V and transient capability to 105V."+      },+      {+        "number": "2",+        "name": "COMP1",+        "type": "input",+        "description": "PWM control input for Controller 1 providing voltage feedback to PWM comparator through 3:1 divider with internal 5-kΩ pull-up resistor to 5.0V for opto-coupler bias."+      },+      {+        "number": "3",+        "name": "CS1",+        "type": "input",+        "description": "Current sense input for Controller 1 for current mode control and cycle-by-cycle current limiting with 0.5V threshold, maximum voltage 1.25V."+      },+      {+        "number": "4",+        "name": "SS1",+        "type": "input",+        "description": "Soft-start input for Controller 1 with internal 50-µA charging current source, reduced to 1-µA during current limit restart, shutdown when forced below 0.5V."+      },+      {+        "number": "5",+        "name": "UVLO",+        "type": "input",+        "description": "VIN under-voltage lockout input with 1.25V comparator reference, switched 20-µA current source for hysteresis, and controls maximum duty cycle."+      },+      {+        "number": "6",+        "name": "VCC",+        "type": "power_out",+        "description": "Startup regulator output providing 7.7V regulated supply with current limit minimum of 19mA."+      },+      {+        "number": "7",+        "name": "OUT1",+        "type": "output",+        "description": "Main gate driver output for Controller 1 switching between VCC and GND1 at frequency equal to half oscillator frequency."+      },+      {+        "number": "8",+        "name": "GND1",+        "type": "power_in",+        "description": "Ground connection for Controller 1 including gate driver, PWM controller, soft-start and support functions."+      },+      {+        "number": "9",+        "name": "GND2",+        "type": "power_in",+        "description": "Ground connection for Controller 2 including gate driver, PWM controller and soft-start."+      },+      {+        "number": "10",+        "name": "OUT2",+        "type": "output",+        "description": "Main gate driver output for Controller 2 switching between VCC and GND2 at frequency equal to half oscillator frequency."+      },+      {+        "number": "11",+        "name": "RES",+        "type": "input",+        "description": "Hiccup mode restart adjust input with external capacitor setting time delay before forced restart during sustained current limiting, threshold at 2.55V."+      },+      {+        "number": "12",+        "name": "SS2",+        "type": "input",+        "description": "Soft-start input for Controller 2 with internal 50-µA charging current source, reduced to 1-µA during current limit restart, shutdown when forced below 0.5V."+      },+      {+        "number": "13",+        "name": "CS2",+        "type": "input",+        "description": "Current sense input for Controller 2 for current mode control and cycle-by-cycle current limiting with 0.5V threshold, maximum voltage 1.25V."+      },+      {+        "number": "14",+        "name": "COMP2",+        "type": "input",+        "description": "PWM control input for Controller 2 providing voltage feedback to PWM comparator through 3:1 divider with internal 5-kΩ pull-up resistor to 5.0V for opto-coupler bias."+      },+      {+        "number": "15",+        "name": "DCL",+        "type": "input",+        "description": "Duty cycle limit input with external resistor setting maximum allowed duty cycle at OUT1 and OUT2."+      },+      {+        "number": "16",+        "name": "RT/SYNC",+        "type": "input",+        "description": "Oscillator frequency adjustment and synchronization input with external resistor setting oscillator frequency and accepting ac-coupled external synchronization pulses."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 36,+        "cost_usd": 0.3642,+        "at": "2026-09-24T11:00:13"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm5032",+        "pages": 36,+        "sha256": "7d2e1777413cf7ed",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file