← Commit history
page.json+182−8@@ -1,13 +1,192 @@ {+ "schema_version": 1,+ "type": "component", "slug": "lm5025amtcx",+ "title": "LM5025AMTCX",+ "brief": "Texas Instruments DC-DC Converters, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments DC-DC Converters, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "lm5025amtcx" ],+ "component": {+ "mpn": "LM5025AMTCX",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "PMIC",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lm5025amtcx.pdf",+ "parts": {+ "symbol": "lm5025amtcx.kicad_sym",+ "footprint": "lm5025amtcx.kicad_mod",+ "model_3d": "lm5025amtcx.glb",+ "model_3d_step": "lm5025amtcx.step",+ "lbr": "lm5025amtcx.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VIN",+ "type": "power_in",+ "description": "Source input voltage to the internal high-voltage start-up regulator. Operating range 13 V to 90 V, with transient capability to 105 V."+ },+ {+ "number": "2",+ "name": "RAMP",+ "type": "input",+ "description": "Modulator ramp input. An external RC circuit from VIN sets the ramp slope; the pin is discharged each cycle by an internal FET triggered by the clock or the Volt-Second clamp comparator."+ },+ {+ "number": "3",+ "name": "CS1",+ "type": "input",+ "description": "Current sense input for cycle-by-cycle current limiting. Outputs enter cycle-by-cycle limit if CS1 exceeds 0.5 V; held low for 50 ns after OUT_A rises (leading-edge blanking)."+ },+ {+ "number": "4",+ "name": "CS2",+ "type": "input",+ "description": "Current sense input for soft restart / cycle skip. If CS2 exceeds 0.5 V the outputs are disabled and a soft-start sequence is initiated; SS is fully discharged then released with a 1-\u00b5A pull-up."+ },+ {+ "number": "5",+ "name": "TIME",+ "type": "input",+ "description": "Output overlap and dead-time control. An RSET resistor from TIME to GND produces in-phase OUT_A/OUT_B with overlap; RSET from TIME to REF produces out-of-phase OUT_A/OUT_B with dead time."+ },+ {+ "number": "6",+ "name": "REF",+ "type": "power_out",+ "description": "Precision 5-V reference output. Sourcing up to 10 mA; decouple locally with a 0.1-\u00b5F capacitor. Remains low until VCC UV comparator is satisfied."+ },+ {+ "number": "7",+ "name": "VCC",+ "type": "power_in",+ "description": "Output of the internal high-voltage start-up regulator, nominally regulated to 7.6 V. Also the bias supply input for the IC; an auxiliary winding raising VCC above the regulation setpoint shuts down the internal start-up regulator to reduce dissipation."+ },+ {+ "number": "8",+ "name": "OUT_A",+ "type": "output",+ "description": "Main switch PWM gate-driver output. 3-A peak sink capability."+ },+ {+ "number": "9",+ "name": "OUT_B",+ "type": "output",+ "description": "Active clamp switch gate-driver output. 1.25-A peak sink capability."+ },+ {+ "number": "10",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground return for the gate drivers. Connect directly to AGND at a single point."+ },+ {+ "number": "11",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground for the control circuitry. Connect directly to PGND; on the WSON package the exposed pad is electrically connected to AGND."+ },+ {+ "number": "12",+ "name": "SS",+ "type": "input",+ "description": "Soft-start control. An external capacitor with the internal 20-\u00b5A source sets the soft-start ramp; source drops to 1 \u00b5A after CS2 overcurrent or over-temperature events."+ },+ {+ "number": "13",+ "name": "COMP",+ "type": "input",+ "description": "PWM comparator input. Includes an internal 5-k\u03a9 pull-up; an external opto-coupler sinks current from COMP to control the PWM duty cycle."+ },+ {+ "number": "14",+ "name": "RT",+ "type": "input",+ "description": "Oscillator timing resistor pin. An external resistor from RT to GND sets the internal oscillator frequency (up to 1 MHz)."+ },+ {+ "number": "15",+ "name": "SYNC",+ "type": "input",+ "description": "Oscillator UP/DOWN synchronization input. Accepts an external clock whose frequency is up to 20% lower than or higher than the internal free-running frequency; no maximum sync-frequency constraint."+ },+ {+ "number": "16",+ "name": "UVLO",+ "type": "input",+ "description": "Line undervoltage shutdown input. External divider sets the shutdown threshold (comparator trip 2.5 V); hysteresis provided by a 20-\u00b5A internal current source switched at the 2.5-V threshold."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/lm5025amtcx.pdf",+ "pages": 34,+ "sha256": "970dbd727e87b319",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "TSSOP-16",+ "Category": "PMIC",+ "Pins": "16"+ }+ },+ "variants": [+ {+ "mpn": "LM5025AMTCX",+ "kind": "packaging"+ },+ {+ "mpn": "LM5025AMTCXSQ",+ "kind": "packaging"+ },+ {+ "mpn": "LM5025AMTCXSQE",+ "kind": "packaging"+ },+ {+ "mpn": "LM5025AMTCXSQX",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "lm5025amtcx"+ ],+ "discovery_pitch": "LM5025AMTCX (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +204,5 @@ "docs/lm5025amtcx-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }