← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "lm5021mmx-1",+ "title": "LM5021MMX-1",+ "brief": "Texas Instruments AC-DC Controllers and Regulators, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments AC-DC Controllers and Regulators, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "lm5021mmx-1" ],+ "component": {+ "mpn": "LM5021MMX-1",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-8-0.65mm",+ "pin_count": 8,+ "category": "PMIC",+ "subcategory": "AC-DC Controllers and Regulators",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2302220030_Texas-Instruments-LM5021MMX-1-NOPB_C2872420.pdf",+ "parts": {+ "symbol": "lm5021mmx-1.kicad_sym",+ "footprint": "lm5021mmx-1.kicad_mod",+ "model_3d": "lm5021mmx-1.glb",+ "model_3d_step": "lm5021mmx-1.step",+ "lbr": "lm5021mmx-1.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "COMP",+ "type": "input",+ "description": "Control input for the PWM and Hiccup comparators. Internally pulled up through a 5 k\u03a9 resistor to allow biasing an opto-coupler transistor for isolated feedback. Open-circuit voltage ~5.1 V, short-circuit current ~1.1 mA."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input to the start-up regulator. Directly connected to the rectified high-voltage bus. Internally clamped to 36 V (typ) by a zener diode; recommended operating range 8-30 V, absolute max 30 V to GND with 5 mA clamp current."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_out",+ "description": "Output of the internal linear bias supply regulator, nominally 8.5 V (regulator current limit ~22 mA). Supplies the controller and gate driver sections. Requires an external bypass capacitor to GND. Regulator enables at ~7 V and disables at ~5.8 V."+ },+ {+ "number": "4",+ "name": "OUT",+ "type": "output",+ "description": "MOSFET gate driver output. High-current push-pull driver to the external power MOSFET gate, with source/sink capability of 0.3 A / 0.7 A respectively."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return for the device. All bypass and timing components should reference this pin with a short, low-inductance path."+ },+ {+ "number": "6",+ "name": "CS",+ "type": "input",+ "description": "Current sense input for current-mode control and over-current protection. Cycle-by-cycle current limit threshold ~0.5 V. If CS exceeds 0.5 V above the OUT-off level (>~0.5 V during a leading edge), OUT is switched low. CS is held low for 90 ns after OUT switches high to blank the leading-edge current spike (internal sinking impedance ~35 \u03a9). Absolute max 1.25 V."+ },+ {+ "number": "7",+ "name": "RT/SYNC",+ "type": "bidirectional",+ "description": "Oscillator timing resistor pin and synchronization input. An external resistor from RT to GND sets the oscillator frequency (e.g. 44.2 k\u03a9 \u2192 150 kHz, 13.3 k\u03a9 \u2192 500 kHz). Also accepts synchronization pulses from an external clock (sync threshold ~3.2 V)."+ },+ {+ "number": "8",+ "name": "SS",+ "type": "output",+ "description": "Soft-start and hiccup timing pin. An external capacitor combined with the internal 22 \u00b5A current source sets the soft-start ramp. The same capacitor controls the hiccup-mode period during persistent overload. Open-circuit voltage ~5.2 V."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2302220030_Texas-Instruments-LM5021MMX-1-NOPB_C2872420.pdf",+ "pages": 37,+ "sha256": "c6cf9f41dac472b2",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "VSSOP-8-0.65mm",+ "Category": "PMIC",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "lm5021mmx-1"+ ],+ "discovery_pitch": "LM5021MMX-1 (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/lm5021mmx-1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }