← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# LM5021MMX-1++**Texas Instruments** · AC-DC Controllers and Regulators · VSSOP-8-0.65mm++LM5021MMX-1 from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | input | Control input for the PWM and Hiccup comparators. Internally pulled up through a 5 kΩ resistor to allow biasing an opto-coupler transistor for isolated feedback. Open-circuit voltage ~5.1 V, short-circuit current ~1.1 mA. |+| 2 | VIN | power_in | Input to the start-up regulator. Directly connected to the rectified high-voltage bus. Internally clamped to 36 V (typ) by a zener diode; recommended operating range 8-30 V, absolute max 30 V to GND with 5 mA clamp current. |+| 3 | VCC | power_out | Output of the internal linear bias supply regulator, nominally 8.5 V (regulator current limit ~22 mA). Supplies the controller and gate driver sections. Requires an external bypass capacitor to GND. Regulator enables at ~7 V and disables at ~5.8 V. |+| 4 | OUT | output | MOSFET gate driver output. High-current push-pull driver to the external power MOSFET gate, with source/sink capability of 0.3 A / 0.7 A respectively. |+| 5 | GND | power_in | Ground return for the device. All bypass and timing components should reference this pin with a short, low-inductance path. |+| 6 | CS | input | Current sense input for current-mode control and over-current protection. Cycle-by-cycle current limit threshold ~0.5 V. If CS exceeds 0.5 V above the OUT-off level (>~0.5 V during a leading edge), OUT is switched low. CS is held low for 90 ns after OUT switches high to blank the leading-edge current spike (internal sinking impedance ~35 Ω). Absolute max 1.25 V. |+| 7 | RT/SYNC | bidirectional | Oscillator timing resistor pin and synchronization input. An external resistor from RT to GND sets the oscillator frequency (e.g. 44.2 kΩ → 150 kHz, 13.3 kΩ → 500 kHz). Also accepts synchronization pulses from an external clock (sync threshold ~3.2 V). |+| 8 | SS | output | Soft-start and hiccup timing pin. An external capacitor combined with the internal 22 µA current source sets the soft-start ramp. The same capacitor controls the hiccup-mode period during persistent overload. Open-circuit voltage ~5.2 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8-0.65mm |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `LM5021MMX-1`+- `LM5021MMX-1MM-1`+- `LM5021MMX-1N-1`++## CAD (KiCad official)++- Symbol: `LM5021MMX-1`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](docs/lm5021mmx-1-datasheet.pdf) (37 pp, sha256 `c6cf9f41dac472b2`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5021mmx-1-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lm5021mmx-1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments AC-DC Controllers and Regulators, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "lm5021mmx-1"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm5021mmx-1.kicad_sym",+ "lm5021mmx-1.kicad_mod",+ "lm5021mmx-1.glb",+ "lm5021mmx-1.step",+ "lm5021mmx-1.lbr",+ "docs/hero.png",+ "docs/lm5021mmx-1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}