← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "COMP", "type": "input",- "description": "Control input for the PWM and Hiccup comparators. Internally pulled up through a 5 k\u03a9 resistor to allow biasing an opto-coupler transistor for isolated feedback. Open-circuit voltage ~5.1 V, short-circuit current ~1.1 mA."+ "description": "Control input for the PWM and Hiccup comparators. Internally pulled up through a 5 kΩ resistor to allow biasing an opto-coupler transistor for isolated feedback. Open-circuit voltage ~5.1 V, short-circuit current ~1.1 mA." }, { "number": "2",@@ -62,19 +62,19 @@ "number": "6", "name": "CS", "type": "input",- "description": "Current sense input for current-mode control and over-current protection. Cycle-by-cycle current limit threshold ~0.5 V. If CS exceeds 0.5 V above the OUT-off level (>~0.5 V during a leading edge), OUT is switched low. CS is held low for 90 ns after OUT switches high to blank the leading-edge current spike (internal sinking impedance ~35 \u03a9). Absolute max 1.25 V."+ "description": "Current sense input for current-mode control and over-current protection. Cycle-by-cycle current limit threshold ~0.5 V. If CS exceeds 0.5 V above the OUT-off level (>~0.5 V during a leading edge), OUT is switched low. CS is held low for 90 ns after OUT switches high to blank the leading-edge current spike (internal sinking impedance ~35 Ω). Absolute max 1.25 V." }, { "number": "7", "name": "RT/SYNC", "type": "bidirectional",- "description": "Oscillator timing resistor pin and synchronization input. An external resistor from RT to GND sets the oscillator frequency (e.g. 44.2 k\u03a9 \u2192 150 kHz, 13.3 k\u03a9 \u2192 500 kHz). Also accepts synchronization pulses from an external clock (sync threshold ~3.2 V)."+ "description": "Oscillator timing resistor pin and synchronization input. An external resistor from RT to GND sets the oscillator frequency (e.g. 44.2 kΩ → 150 kHz, 13.3 kΩ → 500 kHz). Also accepts synchronization pulses from an external clock (sync threshold ~3.2 V)." }, { "number": "8", "name": "SS", "type": "output",- "description": "Soft-start and hiccup timing pin. An external capacitor combined with the internal 22 \u00b5A current source sets the soft-start ramp. The same capacitor controls the hiccup-mode period during persistent overload. Open-circuit voltage ~5.2 V."+ "description": "Soft-start and hiccup timing pin. An external capacitor combined with the internal 22 µA current source sets the soft-start ramp. The same capacitor controls the hiccup-mode period during persistent overload. Open-circuit voltage ~5.2 V." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/lm5021mmx-1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }