← Commit history

Initial commit: component/lm5018mrx

Ray ·e298f041cd ·
2 files changed +83
README.mdadded+49
@@ -0,0 +1,49 @@+# LM5018MRX++**Texas Instruments** · DC-DC Converters · SO-8-EP++LM5018MRX from Texas Instruments, in a SO-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RTN | power_in | Ground return / GND reference of the integrated circuit. Electrically connected to the substrate. Exposed pad must tie to this pin. |+| 2 | VIN | power_in | Input supply voltage. Operating input range is 7.5 V to 100 V. Absolute maximum 100 V to RTN. |+| 3 | UVLO | input | Undervoltage lockout input. External resistor divider from VIN to GND programs the undervoltage detection threshold; an internal current source provides hysteresis. Pulling UVLO below 0.66 V places the device in shutdown. |+| 4 | RON | input | On-time control. A resistor from this pin to VIN sets the switch on-time as a function of VIN. Minimum recommended on-time is 100 ns at maximum input voltage. |+| 5 | FB | input | Feedback input to the inverting input of the internal regulation comparator. Regulation reference level is 1.225 V. |+| 6 | VCC | power_out | Output from the internal high-voltage series-pass regulator, regulated at 7.6 V. Provides bias supply for the gate drivers and internal circuitry. A 1.0-µF decoupling capacitor is recommended. |+| 7 | BST | power_in | Bootstrap capacitor pin for the high-side gate driver. Connect a 0.01-µF ceramic capacitor between BST and SW. Charged from VCC through an internal diode when SW is low. |+| 8 | SW | output | Power switching node. Connect to the output inductor and to the bootstrap capacitor. Absolute maximum -1.5 V to VIN+0.3 V (-5 V to VIN+0.3 V for 100 ns transient) referred to RTN. |+| EP | EP | passive | Exposed thermal pad. Must be connected to the RTN pin and to the system ground plane on the application board for reduced thermal resistance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SO-8-EP |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++- `LM5018MRXDDA`+- `LM5018MRXNGU`++## CAD (KiCad official)++- Symbol: `LM5018MRX`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SO-8-EP (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm5018mrx.pdf) (35 pp, sha256 `9ef883fa4a96358c`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5018mrx-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lm5018mrx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, SO-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "lm5018mrx"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm5018mrx.kicad_sym",+    "lm5018mrx.kicad_mod",+    "lm5018mrx.glb",+    "lm5018mrx.step",+    "lm5018mrx.lbr",+    "docs/hero.png",+    "docs/lm5018mrx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file