← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# LM5009MMX++**Texas Instruments** · DC-DC Converters · VSSOP-8-0.65mm++LM5009MMX from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switching output. Power switching node of the integrated N-channel buck MOSFET. Connect to the buck inductor, recirculating (freewheeling) diode, and the bottom plate of the bootstrap capacitor. Absolute maximum steady-state SW voltage is -1 V referenced to RTN. |+| 2 | BST | power_in | Boost pin. External bootstrap capacitor (0.022 uF ceramic recommended) between BST and SW that provides gate drive for the internal high-side buck switch. An internal diode charges the bootstrap capacitor from VCC. BST-to-VCC absolute maximum is 100 V; BST-to-SW absolute maximum is 14 V. |+| 3 | RCL | input | Current limit off-time set pin. A resistor from RCL to RTN programs the off-time asserted when a current limit event is detected. Off-time defaults to 35 us when FB = 0 V (RCL = 100 kOhm). |+| 4 | RTN | power_in | Ground return pin. Ground reference for the entire circuit and current-return path for the internal buck switch and control logic. |+| 5 | FB | input | Feedback input from the regulated output. Connects to the inverting input of the internal regulation comparator with an internal 2.5-V reference (2% accurate over -40 C to +125 C). An overvoltage threshold at 2.875 V turns the switch off. FB bias current is 1 nA typical. |+| 6 | RON/SD | input | On-time set pin and remote shutdown. A resistor from RON/SD to VIN sets the switch on-time as a function of VIN (feed-forward). Minimum recommended on-time is 250 ns at maximum input voltage. Pulling this pin below ~0.7 V (typ) shuts the device down; IN shutdown current is 76 uA typical. |+| 7 | VCC | power_out | Output of the internal high-voltage startup regulator (7.0 V typical, 6.6 V to 7.4 V). Provides gate-drive power for the internal buck switch. If an auxiliary voltage above ~7 V is applied, the internal pass regulator shuts down to reduce dissipation; do not exceed 14 V. An internal diode connects VCC to BST. A 0.1-uF local decoupling capacitor is required. |+| 8 | VIN | power_in | Input voltage supply pin. Recommended operating range 9.5 V to 95 V; absolute maximum 100 V referenced to RTN. Supplies the internal startup regulator and the top of the buck switch through the internal MOSFET. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8-0.65mm |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++Same part, different packaging or reel option.++- `LM5009MMX`+- `LM5009MMXDGK`+- `LM5009MMXSD`+- `LM5009MMXSDX`+- `LM5009MMXNGU`++## CAD (KiCad official)++- Symbol: `LM5009MMX`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm5009mmx.pdf) (26 pp, sha256 `21d1709ee8fe241d`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5009mmx-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lm5009mmx",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "lm5009mmx"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm5009mmx.kicad_sym",+ "lm5009mmx.kicad_mod",+ "lm5009mmx.glb",+ "lm5009mmx.step",+ "lm5009mmx.lbr",+ "docs/hero.png",+ "docs/lm5009mmx-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}