← Commit history

Initial commit: component/lm5007mmx

Ray ·329ff46808 ·
2 files changed +83
README.mdadded+49
@@ -0,0 +1,49 @@+# LM5007MMX++**Texas Instruments** · DC-DC Converters · VSSOP-8-0.65mm++LM5007MMX from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switching node. Drain of the internal N-channel buck switch; connect to the LC output filter (inductor to VOUT and freewheel diode to GND). Also referenced by the BST bootstrap capacitor. |+| 2 | BST | input | Boot-strap capacitor input for the high-side gate driver. An external 0.01 uF ceramic capacitor is required between BST and SW; an internal diode from VCC to BST completes the bootstrap network. |+| 3 | RCL | input | Current-limit off-time programming pin. A resistor from RCL to RTN sets the off-time per cycle in current limit: Toff = 1e-5 / (0.59 + (FB / 7.22e-6 x RCL)). Off-time preset to 17 us when FB = 0 V and decreases as FB rises. |+| 4 | RTN | power_in | Circuit ground return for the device. |+| 5 | FB | input | Feedback signal from the regulated output; connected to the inverting input of the internal regulation comparator. Internal reference threshold is 2.5 V (2.445 V min / 2.550 V max); FB bias current 100 nA typ; FB over-voltage trip 2.875 V. |+| 6 | RON | input | On-time set pin (also serves as the shutdown input). A resistor between RON and VIN programs the switch on-time: Ton = 1.42e-10 x RON / VIN. Minimum recommended on-time is 300 ns at max VIN. Pulling RON low (0 V) shuts the device down (remote shutdown threshold ~0.7 V). |+| 7 | VCC | power_out | Output of the internal high-voltage bias regulator, nominally 7 V (6.6 to 7.4 V). Provides gate-drive power for the internal buck switch and feeds the BST diode. Requires a local 0.1 uF decoupling capacitor. Series pass regulator is current limited to ~10 mA (11 mA typ). An external voltage above 7 V on FB will shut the internal regulator down; do not exceed 14 V on this pin. |+| 8 | VIN | power_in | Input supply voltage. Recommended operating range 9 V to 75 V; absolute-maximum 80 V. Drain of the internal buck switch is powered from this rail. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8-0.65mm |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `LM5007MMX`+- `LM5007MMXSD`+- `LM5007MMXSDX`++## CAD (KiCad official)++- Symbol: `LM5007MMX`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm5007mmx.pdf) (25 pp, sha256 `13e9052ebcf1f85b`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5007mmx-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lm5007mmx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "lm5007mmx"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm5007mmx.kicad_sym",+    "lm5007mmx.kicad_mod",+    "lm5007mmx.glb",+    "lm5007mmx.step",+    "lm5007mmx.lbr",+    "docs/hero.png",+    "docs/lm5007mmx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file