← Commit history

lm4990mmx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·489988f9af · ·parent 7a1d3d2
2 files changed +92−12
package.json+50−10
@@ -67,49 +67,49 @@         "number": "1",         "name": "SHUTDOWN",         "type": "input",-        "description": "Active-low shutdown control input; pulling low (same state as internally-tied GND SD MODE) enters ultra-low-power shutdown; ISD = 0.1 \u00b5A typ, 2.0 \u00b5A max."+        "description": "Active-low shutdown control input; pulling low (same state as internally-tied GND SD MODE) enters ultra-low-power shutdown; ISD = 0.1 µA typ, 2.0 µA max."       },       {         "number": "2",         "name": "BYPASS",         "type": "passive",-        "description": "Half-supply voltage bypass pin; connect a 1.0 \u00b5F capacitor to GND here to set the internal mid-supply reference and minimize turn-on pop."+        "description": "Half-supply voltage bypass pin; connect a 1.0 µF capacitor to GND here to set the internal mid-supply reference and minimize turn-on pop."       },       {         "number": "3",         "name": "+IN",         "type": "input",-        "description": "Non-inverting audio signal input to amplifier 1; input voltage range \u22120.3 V to VDD + 0.3 V; input impedance set by external Ri."+        "description": "Non-inverting audio signal input to amplifier 1; input voltage range −0.3 V to VDD + 0.3 V; input impedance set by external Ri."       },       {         "number": "4",         "name": "-IN",         "type": "input",-        "description": "Inverting audio signal input to amplifier 1; closed-loop gain set by external Rf/Ri ratio; AVD = 2\u00d7(Rf/Ri)."+        "description": "Inverting audio signal input to amplifier 1; closed-loop gain set by external Rf/Ri ratio; AVD = 2×(Rf/Ri)."       },       {         "number": "5",         "name": "VO1",         "type": "output",-        "description": "BTL output of amplifier 1 (externally gain-configurable); biased at VDD/2 quiescent; drives one end of the speaker load; 1.25 W typ into 8 \u03a9 at 5 V, 1% THD+N."+        "description": "BTL output of amplifier 1 (externally gain-configurable); biased at VDD/2 quiescent; drives one end of the speaker load; 1.25 W typ into 8 Ω at 5 V, 1% THD+N."       },       {         "number": "6",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply voltage; operating range 2.2 V to 5.5 V; absolute maximum 6.0 V; decouple with 10 \u00b5F bulk and local ceramic capacitor as close as possible to pin."+        "description": "Positive supply voltage; operating range 2.2 V to 5.5 V; absolute maximum 6.0 V; decouple with 10 µF bulk and local ceramic capacitor as close as possible to pin."       },       {         "number": "7",         "name": "GND",         "type": "power_in",-        "description": "Ground reference for all internal circuitry; \u03b8JA = 190 \u00b0C/W for the VSSOP package; all voltages measured with respect to this pin."+        "description": "Ground reference for all internal circuitry; θJA = 190 °C/W for the VSSOP package; all voltages measured with respect to this pin."       },       {         "number": "8",         "name": "VO2",         "type": "output",-        "description": "BTL output of amplifier 2 (internally fixed unity-gain inverting); 180\u00b0 out of phase with VO1; biased at VDD/2 quiescent; completes the differential bridge drive."+        "description": "BTL output of amplifier 2 (internally fixed unity-gain inverting); 180° out of phase with VO1; biased at VDD/2 quiescent; completes the differential bridge drive."       }     ],     "provenance": {@@ -146,6 +146,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm4990mmx.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.1,+          2.0,+          0.85+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm4990mmx-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.1,+          2.0,+          0.85+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "ce934b2f3f5f67c5e8bac2a4478c790588c588f023c16076a5e645596a59e63d",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -131,7 +131,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm4990mmx.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.1,+          2.0,+          0.85+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm4990mmx-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.1,+          2.0,+          0.85+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "ce934b2f3f5f67c5e8bac2a4478c790588c588f023c16076a5e645596a59e63d",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -178,4 +218,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}