← Commit history

Initial commit: component/lm4890mx

Ray ·8edaa84045 ·
2 files changed +187
README.mdadded+44
@@ -0,0 +1,44 @@+# LM4890MX++**Texas Instruments** · Audio Amplifiers · SOIC-8++LM4890MX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SHUTDOWN | input | Active-low shutdown control input: driving this pin to a logic low (VSDIL ≤ 0.4V max) puts the device into ultra-low-power shutdown (ISD = 0.1µA typ, 2.0µA max), while a logic high (VSDIH ≥ 1.2V min) enables normal operation; wake-up time is 170ms typ/220ms max at VDD=5V. |+| 2 | BYPASS | passive | Half-supply bypass node; an external capacitor (CBYPASS, recommended 1.0µF) connected from this pin to ground filters the internal half-supply reference to improve PSRR and minimize turn-on/turn-off pop noise. |+| 3 | +IN | input | Non-inverting audio input of internal amplifier A1, part of the differential input pair used to set closed-loop gain with the external RIN/Rf network; input voltage range is -0.3V to VDD+0.3V per Absolute Maximum Ratings. |+| 4 | -IN | input | Inverting audio input of internal amplifier A1; connects through external RIN and CIN to the audio source and receives feedback through Rf, setting the differential closed-loop gain AVD = 2*(Rf/RIN). |+| 5 | Vo1 | output | BTL (bridge-tied load) amplifier output 1; together with Vo2 drives the load (typically 8Ω) differentially, delivering up to 1W typ at VDD=5V/1%THD without requiring output coupling, snubber, or bootstrap capacitors. |+| 6 | VDD | power_in | Positive power supply input; operating range is 2.2V to 5.5V (absolute maximum 6.0V), with quiescent supply current IDD typically 4mA (8mA max, no load) at VDD=5V. |+| 7 | GND | power_in | Ground reference pin; all device voltages are measured with respect to this pin. |+| 8 | Vo2 | output | BTL amplifier output 2, driven by the internally fixed unity-gain inverting amplifier A2 (set by two internal 20kΩ resistors); together with Vo1 drives the load differentially 180° out of phase. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Amplifiers/Comparators |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `LM4890MX`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `lm4890mx-etched.step` / `lm4890mx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm4890mx.step` / `lm4890mx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm4890) (40 pp, sha256 `13ec1db10db71b3a`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-5` (text+vision), consensus `claude-opus-4-8` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm4890mx-datasheet.pdf)
page.jsonadded+143
@@ -0,0 +1,143 @@+{+  "slug": "lm4890mx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Audio Amplifiers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "amplifiers-comparators",+    "lm4890mx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm4890mx.kicad_sym",+    "lm4890mx.kicad_mod",+    "lm4890mx.glb",+    "lm4890mx.step",+    "lm4890mx.lbr",+    "docs/hero.png",+    "docs/lm4890mx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM4890MX",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Amplifiers/Comparators",+    "subcategory": "Audio Amplifiers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm4890",+    "parts": {+      "symbol": "lm4890mx.kicad_sym",+      "footprint": "lm4890mx.kicad_mod",+      "model_3d": "lm4890mx-etched.glb",+      "model_3d_plain": "lm4890mx.glb",+      "model_3d_step": "lm4890mx-etched.step",+      "model_3d_step_plain": "lm4890mx.step",+      "lbr": "lm4890mx.lbr"+    },+    "distributor_links": {+      "lcsc": "C117476"+    },+    "pins": [+      {+        "number": "1",+        "name": "SHUTDOWN",+        "type": "input",+        "description": "Active-low shutdown control input: driving this pin to a logic low (VSDIL ≤ 0.4V max) puts the device into ultra-low-power shutdown (ISD = 0.1µA typ, 2.0µA max), while a logic high (VSDIH ≥ 1.2V min) enables normal operation; wake-up time is 170ms typ/220ms max at VDD=5V."+      },+      {+        "number": "2",+        "name": "BYPASS",+        "type": "passive",+        "description": "Half-supply bypass node; an external capacitor (CBYPASS, recommended 1.0µF) connected from this pin to ground filters the internal half-supply reference to improve PSRR and minimize turn-on/turn-off pop noise."+      },+      {+        "number": "3",+        "name": "+IN",+        "type": "input",+        "description": "Non-inverting audio input of internal amplifier A1, part of the differential input pair used to set closed-loop gain with the external RIN/Rf network; input voltage range is -0.3V to VDD+0.3V per Absolute Maximum Ratings."+      },+      {+        "number": "4",+        "name": "-IN",+        "type": "input",+        "description": "Inverting audio input of internal amplifier A1; connects through external RIN and CIN to the audio source and receives feedback through Rf, setting the differential closed-loop gain AVD = 2*(Rf/RIN)."+      },+      {+        "number": "5",+        "name": "Vo1",+        "type": "output",+        "description": "BTL (bridge-tied load) amplifier output 1; together with Vo2 drives the load (typically 8Ω) differentially, delivering up to 1W typ at VDD=5V/1%THD without requiring output coupling, snubber, or bootstrap capacitors."+      },+      {+        "number": "6",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive power supply input; operating range is 2.2V to 5.5V (absolute maximum 6.0V), with quiescent supply current IDD typically 4mA (8mA max, no load) at VDD=5V."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference pin; all device voltages are measured with respect to this pin."+      },+      {+        "number": "8",+        "name": "Vo2",+        "type": "output",+        "description": "BTL amplifier output 2, driven by the internally fixed unity-gain inverting amplifier A2 (set by two internal 20kΩ resistors); together with Vo1 drives the load differentially 180° out of phase."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-sonnet-5",+        "primary_mode": "text+vision",+        "consensus_model": "claude-opus-4-8",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "vision extraction: provenance cannot be text-verified; needs consensus"+        ],+        "pages_sent": 40,+        "cost_usd": 1.0763,+        "at": "2026-09-23T10:11:23"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm4890",+        "pages": 40,+        "sha256": "13ec1db10db71b3a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file