component
LM48511SQX
Public Made by Adomby adom
Texas Instruments Audio Amplifiers, WQFN-24-EP(4x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+61@@ -0,0 +1,61 @@+# LM48511SQX++**Texas Instruments** · Audio Amplifiers · WQFN-24-EP(4x5)++LM48511SQX from Texas Instruments, in a WQFN-24-EP(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | FB_SEL | input | Regulator feedback select input; connect to VDD to select feedback network connected to FB_GND1, or connect to GND to select feedback network connected to FB_GND0. |+| 2 | SW | passive | Drain of the internal FET switch for boost converter switching stage. |+| 3 | SW | passive | Drain of the internal FET switch for boost converter switching stage. |+| 4 | SOFTSTART | passive | Soft-start capacitor connection point for limiting transient current at start-up. |+| 5 | SD_AMP | input | Amplifier active-low shutdown input; connect to VDD for normal operation or to GND to disable amplifier. |+| 6 | SS/FF | input | Modulation mode select input; connect to VDD for spread spectrum mode (SS) or to GND for fixed frequency mode (FF). |+| 7 | GND | power_in | Signal ground for analog circuits and Class D amplifier. |+| 8 | LS+ | output | Amplifier noninverting output; supplies current to positive terminal of speaker load. |+| 9 | LSGND | power_in | Amplifier H-Bridge ground, part of the output stage power return path. |+| 10 | PV1 | power_in | Amplifier H-Bridge power supply input; must be connected to V1 for proper operation. |+| 11 | LSGND | power_in | Amplifier H-Bridge ground, part of the output stage power return path. |+| 12 | LS- | output | Amplifier inverting output; supplies current to negative terminal of speaker load. |+| 13 | V1 | power_in | Amplifier supply voltage node; connect to PV1 from boost converter output. |+| 14 | VGO+ | output | Amplifier noninverting gain output stage signal for feedback resistor network. |+| 15 | IN- | input | Amplifier inverting input for differential audio signal; input impedance determined by external input resistors. |+| 16 | IN+ | input | Amplifier noninverting input for differential audio signal; input impedance determined by external input resistors. |+| 17 | VGO- | output | Amplifier inverting gain output stage signal for feedback resistor network. |+| 18 | VDD | power_in | Power supply input, operating range 3 V to 5.5 V with 9 V absolute maximum rating. |+| 19 | FB | input | Regulator feedback input connected to midpoint of external voltage divider network to set boost output voltage. |+| 20 | FB_GND1 | power_in | Ground return for R2 resistor in voltage divider network; selected when FB_SEL = VDD. |+| 21 | FB_GND0 | power_in | Ground return for R1 resistor in voltage divider network; selected when FB_SEL = GND. |+| 22 | REGGND | power_in | Power ground for boost converter switching stage and regulator circuits. |+| 23 | REGGND | power_in | Power ground for boost converter switching stage and regulator circuits. |+| 24 | SD_BOOST | input | Regulator active-low shutdown input; connect to VDD for normal operation or to GND to disable boost regulator. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-24-EP(4x5) |+| Category | Amplifiers/Comparators |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `LM48511SQX`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm`+- 3D model: WQFN-24-EP(4x5) (KiCad packages3D, STEP)+- 3D model files: `lm48511sqx-etched.step` / `lm48511sqx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm48511sqx.step` / `lm48511sqx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm48511) (28 pp, sha256 `47fbd38c5dc884f1`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm48511sqx-datasheet.pdf)
page.jsonadded+245@@ -0,0 +1,245 @@+{+ "slug": "lm48511sqx",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Audio Amplifiers, WQFN-24-EP(4x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "lm48511sqx",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm48511sqx.kicad_sym",+ "lm48511sqx.kicad_mod",+ "lm48511sqx.glb",+ "lm48511sqx.step",+ "lm48511sqx.lbr",+ "docs/hero.png",+ "docs/lm48511sqx-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LM48511SQX",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-24-EP(4x5)",+ "pin_count": 25,+ "category": "Amplifiers/Comparators",+ "subcategory": "Audio Amplifiers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm48511",+ "parts": {+ "symbol": "lm48511sqx.kicad_sym",+ "footprint": "lm48511sqx.kicad_mod",+ "model_3d": "lm48511sqx-etched.glb",+ "model_3d_plain": "lm48511sqx.glb",+ "model_3d_step": "lm48511sqx-etched.step",+ "model_3d_step_plain": "lm48511sqx.step",+ "lbr": "lm48511sqx.lbr"+ },+ "distributor_links": {+ "lcsc": "C527406"+ },+ "pins": [+ {+ "number": "1",+ "name": "FB_SEL",+ "type": "input",+ "description": "Regulator feedback select input; connect to VDD to select feedback network connected to FB_GND1, or connect to GND to select feedback network connected to FB_GND0."+ },+ {+ "number": "2",+ "name": "SW",+ "type": "passive",+ "description": "Drain of the internal FET switch for boost converter switching stage."+ },+ {+ "number": "3",+ "name": "SW",+ "type": "passive",+ "description": "Drain of the internal FET switch for boost converter switching stage."+ },+ {+ "number": "4",+ "name": "SOFTSTART",+ "type": "passive",+ "description": "Soft-start capacitor connection point for limiting transient current at start-up."+ },+ {+ "number": "5",+ "name": "SD_AMP",+ "type": "input",+ "description": "Amplifier active-low shutdown input; connect to VDD for normal operation or to GND to disable amplifier."+ },+ {+ "number": "6",+ "name": "SS/FF",+ "type": "input",+ "description": "Modulation mode select input; connect to VDD for spread spectrum mode (SS) or to GND for fixed frequency mode (FF)."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Signal ground for analog circuits and Class D amplifier."+ },+ {+ "number": "8",+ "name": "LS+",+ "type": "output",+ "description": "Amplifier noninverting output; supplies current to positive terminal of speaker load."+ },+ {+ "number": "9",+ "name": "LSGND",+ "type": "power_in",+ "description": "Amplifier H-Bridge ground, part of the output stage power return path."+ },+ {+ "number": "10",+ "name": "PV1",+ "type": "power_in",+ "description": "Amplifier H-Bridge power supply input; must be connected to V1 for proper operation."+ },+ {+ "number": "11",+ "name": "LSGND",+ "type": "power_in",+ "description": "Amplifier H-Bridge ground, part of the output stage power return path."+ },+ {+ "number": "12",+ "name": "LS–",+ "type": "output",+ "description": "Amplifier inverting output; supplies current to negative terminal of speaker load."+ },+ {+ "number": "13",+ "name": "V1",+ "type": "power_in",+ "description": "Amplifier supply voltage node; connect to PV1 from boost converter output."+ },+ {+ "number": "14",+ "name": "VGO+",+ "type": "output",+ "description": "Amplifier noninverting gain output stage signal for feedback resistor network."+ },+ {+ "number": "15",+ "name": "IN–",+ "type": "input",+ "description": "Amplifier inverting input for differential audio signal; input impedance determined by external input resistors."+ },+ {+ "number": "16",+ "name": "IN+",+ "type": "input",+ "description": "Amplifier noninverting input for differential audio signal; input impedance determined by external input resistors."+ },+ {+ "number": "17",+ "name": "VGO–",+ "type": "output",+ "description": "Amplifier inverting gain output stage signal for feedback resistor network."+ },+ {+ "number": "18",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply input, operating range 3 V to 5.5 V with 9 V absolute maximum rating."+ },+ {+ "number": "19",+ "name": "FB",+ "type": "input",+ "description": "Regulator feedback input connected to midpoint of external voltage divider network to set boost output voltage."+ },+ {+ "number": "20",+ "name": "FB_GND1",+ "type": "power_in",+ "description": "Ground return for R2 resistor in voltage divider network; selected when FB_SEL = VDD."+ },+ {+ "number": "21",+ "name": "FB_GND0",+ "type": "power_in",+ "description": "Ground return for R1 resistor in voltage divider network; selected when FB_SEL = GND."+ },+ {+ "number": "22",+ "name": "REGGND",+ "type": "power_in",+ "description": "Power ground for boost converter switching stage and regulator circuits."+ },+ {+ "number": "23",+ "name": "REGGND",+ "type": "power_in",+ "description": "Power ground for boost converter switching stage and regulator circuits."+ },+ {+ "number": "24",+ "name": "SD_BOOST",+ "type": "input",+ "description": "Regulator active-low shutdown input; connect to VDD for normal operation or to GND to disable boost regulator."+ },+ {+ "number": "25",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 25 added from the footprint"+ ],+ "pages_sent": 28,+ "cost_usd": 0.3385,+ "at": "2026-09-23T13:12:23"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm48511",+ "pages": 28,+ "sha256": "47fbd38c5dc884f1",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}