← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# LM46000PWPR++**Texas Instruments** · DC-DC Converters · HTSSOP-16-EP++LM46000PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switching output of the regulator internally connected to both power MOSFETs; connect to power inductor. |+| 2 | SW | output | Switching output of the regulator internally connected to both power MOSFETs; connect to power inductor. |+| 3 | CBOOT | passive | Bootstrap capacitor connection for high-side driver; connect a high-quality 470-nF capacitor from CBOOT to SW. |+| 4 | VCC | power_out | Internal bias supply output for bypassing; connect bypass capacitor from this pin to AGND and do not connect external load. |+| 5 | BIAS | power_in | Optional internal LDO supply input for 3.3 V ≤ VOUT ≤ 28 V with bypass capacitor (1 to 10 µF), or tie to ground when VOUT < 3.3 V. |+| 6 | SYNC | input | Clock input to synchronize switching action to external clock with frequency range 200 kHz to 2.2 MHz; use high-speed termination. |+| 7 | RT | passive | Resistor connection to AGND to program switching frequency from 200 kHz to 2.2 MHz, or leave floating for 500-kHz default. |+| 8 | PGOOD | tri_state | Open-drain output for power-good flag indicating VOUT regulation status; use 10-kΩ to 100-kΩ pullup resistor to voltage not exceeding 12 V. |+| 9 | FB | input | Feedback sense input pin connected to midpoint of feedback divider to set VOUT; do not short to ground during operation. |+| 10 | AGND | power_in | Analog ground pin serving as ground reference for internal references and logic; connect to system ground. |+| 11 | SS/TRK | input | Soft-start control pin for internal 4.1 ms soft-start time, extendable via external capacitor, or trackable via external voltage ramp. |+| 12 | EN | input | Enable input controlling ON/OFF functionality; high enables operation, low (<0.4 V) shuts down; do not float. |+| 13 | VIN | power_in | Supply input pin to internal LDO and high-side power FET with operating range 3.5 V to 60 V. |+| 14 | VIN | power_in | Supply input pin to internal LDO and high-side power FET with operating range 3.5 V to 60 V. |+| 15 | PGND | power_in | Power ground pin connected to low-side power FET; connect to system ground, PAD, AGND, and CIN/COUT grounds. |+| 16 | PGND | power_in | Power ground pin connected to low-side power FET; connect to system ground, PAD, AGND, and CIN/COUT grounds. |+| 17 | PAD | power_in | Thermal pad providing low-impedance ground connection and major heat dissipation path; must be used for heat sinking to ground plane. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-16-EP |+| Category | Power Supply Chip |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `LM46000PWPR`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `lm46000pwpr-etched.step` / `lm46000pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm46000pwpr.step` / `lm46000pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm46000) (56 pp, sha256 `aa402663c9468ce0`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm46000pwpr-datasheet.pdf)
page.jsonadded+195@@ -0,0 +1,195 @@+{+ "slug": "lm46000pwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "lm46000pwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm46000pwpr.kicad_sym",+ "lm46000pwpr.kicad_mod",+ "lm46000pwpr.glb",+ "lm46000pwpr.step",+ "lm46000pwpr.lbr",+ "docs/hero.png",+ "docs/lm46000pwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LM46000PWPR",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-16-EP",+ "pin_count": 17,+ "category": "Power Supply Chip",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm46000",+ "parts": {+ "symbol": "lm46000pwpr.kicad_sym",+ "footprint": "lm46000pwpr.kicad_mod",+ "model_3d": "lm46000pwpr-etched.glb",+ "model_3d_plain": "lm46000pwpr.glb",+ "model_3d_step": "lm46000pwpr-etched.step",+ "model_3d_step_plain": "lm46000pwpr.step",+ "lbr": "lm46000pwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2070627"+ },+ "pins": [+ {+ "number": "1",+ "name": "SW",+ "type": "output",+ "description": "Switching output of the regulator internally connected to both power MOSFETs; connect to power inductor."+ },+ {+ "number": "2",+ "name": "SW",+ "type": "output",+ "description": "Switching output of the regulator internally connected to both power MOSFETs; connect to power inductor."+ },+ {+ "number": "3",+ "name": "CBOOT",+ "type": "passive",+ "description": "Bootstrap capacitor connection for high-side driver; connect a high-quality 470-nF capacitor from CBOOT to SW."+ },+ {+ "number": "4",+ "name": "VCC",+ "type": "power_out",+ "description": "Internal bias supply output for bypassing; connect bypass capacitor from this pin to AGND and do not connect external load."+ },+ {+ "number": "5",+ "name": "BIAS",+ "type": "power_in",+ "description": "Optional internal LDO supply input for 3.3 V ≤ VOUT ≤ 28 V with bypass capacitor (1 to 10 µF), or tie to ground when VOUT < 3.3 V."+ },+ {+ "number": "6",+ "name": "SYNC",+ "type": "input",+ "description": "Clock input to synchronize switching action to external clock with frequency range 200 kHz to 2.2 MHz; use high-speed termination."+ },+ {+ "number": "7",+ "name": "RT",+ "type": "passive",+ "description": "Resistor connection to AGND to program switching frequency from 200 kHz to 2.2 MHz, or leave floating for 500-kHz default."+ },+ {+ "number": "8",+ "name": "PGOOD",+ "type": "tri_state",+ "description": "Open-drain output for power-good flag indicating VOUT regulation status; use 10-kΩ to 100-kΩ pullup resistor to voltage not exceeding 12 V."+ },+ {+ "number": "9",+ "name": "FB",+ "type": "input",+ "description": "Feedback sense input pin connected to midpoint of feedback divider to set VOUT; do not short to ground during operation."+ },+ {+ "number": "10",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground pin serving as ground reference for internal references and logic; connect to system ground."+ },+ {+ "number": "11",+ "name": "SS/TRK",+ "type": "input",+ "description": "Soft-start control pin for internal 4.1 ms soft-start time, extendable via external capacitor, or trackable via external voltage ramp."+ },+ {+ "number": "12",+ "name": "EN",+ "type": "input",+ "description": "Enable input controlling ON/OFF functionality; high enables operation, low (<0.4 V) shuts down; do not float."+ },+ {+ "number": "13",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply input pin to internal LDO and high-side power FET with operating range 3.5 V to 60 V."+ },+ {+ "number": "14",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply input pin to internal LDO and high-side power FET with operating range 3.5 V to 60 V."+ },+ {+ "number": "15",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground pin connected to low-side power FET; connect to system ground, PAD, AGND, and CIN/COUT grounds."+ },+ {+ "number": "16",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground pin connected to low-side power FET; connect to system ground, PAD, AGND, and CIN/COUT grounds."+ },+ {+ "number": "17",+ "name": "PAD",+ "type": "power_in",+ "description": "Thermal pad providing low-impedance ground connection and major heat dissipation path; must be used for heat sinking to ground plane."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 56,+ "cost_usd": 0.5826,+ "at": "2026-09-23T03:22:29"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm46000",+ "pages": 56,+ "sha256": "aa402663c9468ce0",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}