← Commit history

lm43602pwpr: factory component page (tier=mfr)

Ray ·230269b0d2 · ·parent d74c4f4
1 file changed +180−8
page.json+180−8
@@ -1,13 +1,190 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lm43602pwpr",+  "title": "LM43602PWPR",+  "brief": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "lm43602pwpr"   ],+  "component": {+    "mpn": "LM43602PWPR",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-16-EP",+    "pin_count": 17,+    "category": "PMIC",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/lit/ds/symlink/lm43602pwpr.pdf",+    "parts": {+      "symbol": "lm43602pwpr.kicad_sym",+      "footprint": "lm43602pwpr.kicad_mod",+      "model_3d": "lm43602pwpr.glb",+      "model_3d_step": "lm43602pwpr.step",+      "lbr": "lm43602pwpr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "SW",+        "type": "power_out",+        "description": "Switching node output of the regulator, internally connected to both power MOSFETs. Connect to the external power inductor. Pins 1 and 2 are shorted internally."+      },+      {+        "number": "2",+        "name": "SW",+        "type": "power_out",+        "description": "Switching node output of the regulator, internally connected to both power MOSFETs. Connect to the external power inductor. Pins 1 and 2 are shorted internally."+      },+      {+        "number": "3",+        "name": "CBOOT",+        "type": "passive",+        "description": "Boot-strap capacitor connection for the high-side gate driver. Connect a high quality 470-nF capacitor from CBOOT to SW."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_out",+        "description": "Internal bias supply output (approx. 3.28 V) for bypassing. Connect a bypass capacitor from this pin to AGND. Do not connect external loading; never short to ground during operation."+      },+      {+        "number": "5",+        "name": "BIAS",+        "type": "power_in",+        "description": "Optional internal LDO supply input. Tie to VOUT when 3.3 V \u2264 VOUT \u2264 28 V, or to an external 3.3 V or 5 V rail, to improve efficiency. Place a 1-\u00b5F to 10-\u00b5F bypass capacitor to ground when used; tie to ground when not used."+      },+      {+        "number": "6",+        "name": "SYNC",+        "type": "input",+        "description": "Clock input to synchronize switching action to an external clock. Use proper high-speed termination to prevent ringing. Connect to ground if not used."+      },+      {+        "number": "7",+        "name": "RT",+        "type": "input",+        "description": "Switching frequency programming pin. Connect a resistor R_T from this pin to AGND to set the switching frequency between 200 kHz and 2.2 MHz. Leave floating for 500 kHz default."+      },+      {+        "number": "8",+        "name": "PGOOD",+        "type": "output",+        "description": "Open-drain power-good flag output. Use a 10-k\u03a9 to 100-k\u03a9 pull-up resistor to a logic rail or other DC voltage no higher than 12 V."+      },+      {+        "number": "9",+        "name": "FB",+        "type": "input",+        "description": "Feedback sense input pin. Connect to the midpoint of the external feedback divider to set VOUT. Do not short this pin to ground during operation."+      },+      {+        "number": "10",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground pin. Ground reference for internal references and logic. Connect to system ground."+      },+      {+        "number": "11",+        "name": "SS/TRK",+        "type": "input",+        "description": "Soft-start / tracking control pin. Leave floating for the internal 4.1-ms soft-start slew rate. Connect a capacitor to extend soft-start time, or connect to an external voltage ramp for output tracking."+      },+      {+        "number": "12",+        "name": "EN",+        "type": "input",+        "description": "Precision enable input to the internal LDO and regulator. High = ON, low = OFF. Connect to VIN, or to VIN through a resistor divider (for programmable UVLO), or to an external voltage/logic source. Do not float."+      },+      {+        "number": "13",+        "name": "VIN",+        "type": "power_in",+        "description": "Supply input pin to the internal LDO and the high-side power FET (3.5 V to 36 V operating, 42 V abs max). Connect to the input supply and bypass capacitor C_IN. Pins 13 and 14 are shorted internally; the path from VIN to high-frequency bypass C_IN and PGND must be as short as possible."+      },+      {+        "number": "14",+        "name": "VIN",+        "type": "power_in",+        "description": "Supply input pin to the internal LDO and the high-side power FET (3.5 V to 36 V operating, 42 V abs max). Connect to the input supply and bypass capacitor C_IN. Pins 13 and 14 are shorted internally; the path from VIN to high-frequency bypass C_IN and PGND must be as short as possible."+      },+      {+        "number": "15",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground pin, connected internally to the low-side power FET. Connect to system ground, PAD, AGND, and the ground pins of C_IN and C_OUT. Path to C_IN must be as short as possible."+      },+      {+        "number": "16",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground pin, connected internally to the low-side power FET. Connect to system ground, PAD, AGND, and the ground pins of C_IN and C_OUT. Path to C_IN must be as short as possible."+      },+      {+        "number": "17",+        "name": "PAD",+        "type": "power_in",+        "description": "Exposed thermal pad. Low-impedance connection to AGND; connect to PGND on the PCB. Major heat-dissipation path of the die; must be soldered to a copper ground plane for thermal performance."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/lm43602pwpr.pdf",+        "pages": 49,+        "sha256": "a3b4d1cca14b806e",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "HTSSOP-16-EP",+      "Category": "PMIC",+      "Pins": "17"+    }+  },+  "variants": [+    {+      "mpn": "LM43602PWPR",+      "kind": "packaging"+    },+    {+      "mpn": "LM43602PWPRDSU",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lm43602pwpr"+  ],+  "discovery_pitch": "LM43602PWPR (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +202,5 @@     "docs/lm43602pwpr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file