component
LM3670MFX-ADJ
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+41@@ -0,0 +1,41 @@+# LM3670MFX-ADJ++**Texas Instruments** · DC-DC Converters · SOT-23-5++LM3670MFX-ADJ from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Power supply input, connected to the input filter capacitor; recommended input voltage range is 2.5 V to 5.5 V. |+| 2 | GND | power_in | Ground pin. |+| 3 | EN | input | Digital enable input; pulling EN low puts the device in shutdown, where it draws 0.1 µA typical. |+| 4 | FB | input | Analog feedback input, connected to the output filter capacitor; on the adjustable version it sets the output voltage (0.7 V to 2.5 V). |+| 5 | SW | output | Switching node connecting the internal PFET switch and NFET synchronous rectifier to the inductor; the inductor saturation current rating must exceed the 750-mA maximum switch peak current limit. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOT-23-5 |+| Category | Power Management (PMIC) |+| Pins | 5 |++## CAD (KiCad official)++- Symbol: `LM3670MFX-ADJ`+- Footprint: `Package_TO_SOT_SMD:SOT-23-5`+- 3D model: SOT-23-5 (KiCad packages3D, STEP)+- 3D model files: `lm3670mfx-adj-etched.step` / `lm3670mfx-adj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm3670mfx-adj.step` / `lm3670mfx-adj.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm3670) (29 pp, sha256 `facbd196af963148`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm3670mfx-adj-datasheet.pdf)
page.jsonadded+181@@ -0,0 +1,181 @@+{+ "slug": "lm3670mfx-adj",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lm3670mfx-adj",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm3670mfx-adj.kicad_sym",+ "lm3670mfx-adj.kicad_mod",+ "lm3670mfx-adj.glb",+ "lm3670mfx-adj.step",+ "lm3670mfx-adj.lbr",+ "docs/hero.png",+ "docs/lm3670mfx-adj-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lm3670mfx-adj-hero.glb",+ "lm3670mfx-adj-hero.overlay.json"+ ],+ "component": {+ "mpn": "LM3670MFX-ADJ",+ "manufacturer": "Texas Instruments",+ "package": "SOT-23-5",+ "pin_count": 5,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm3670",+ "parts": {+ "symbol": "lm3670mfx-adj.kicad_sym",+ "footprint": "lm3670mfx-adj.kicad_mod",+ "model_3d": "lm3670mfx-adj-hero.glb",+ "model_3d_plain": "lm3670mfx-adj.glb",+ "model_3d_step": "lm3670mfx-adj-etched.step",+ "model_3d_step_plain": "lm3670mfx-adj.step",+ "lbr": "lm3670mfx-adj.lbr"+ },+ "distributor_links": {+ "lcsc": "C82372",+ "digikey": "2156-LM3670MFX-ADJ-ND"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T18:53:04Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "2156-LM3670MFX-ADJ-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VIN",+ "type": "power_in",+ "description": "Power supply input, connected to the input filter capacitor; recommended input voltage range is 2.5 V to 5.5 V."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Digital enable input; pulling EN low puts the device in shutdown, where it draws 0.1 µA typical."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Analog feedback input, connected to the output filter capacitor; on the adjustable version it sets the output voltage (0.7 V to 2.5 V)."+ },+ {+ "number": "5",+ "name": "SW",+ "type": "output",+ "description": "Switching node connecting the internal PFET switch and NFET synchronous rectifier to the inductor; the inductor saturation current rating must exceed the 750-mA maximum switch peak current limit."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The pinout is taken from the single 5-pin DBV (SOT-23) package table on page 3. Page 22 lists LM3670; The datasheet gives SW only as 'Analog'. The KiCad type 'output' was chosen because SW is the conver; The FB description's 0.7 V to 2.5 V range is the adjustable output range from the Features list on p"+ ],+ "pages_sent": 8,+ "cost_usd": 0.0553,+ "at": "2026-10-08T18:52:18"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm3670",+ "pages": 29,+ "sha256": "facbd196af963148",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 5,+ "described": 5,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lm3670mfx-adj.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm3670mfx-adj-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "564c795562bbf7f0c847144cba65526a8307786aba2b3e31a204c434fb127b22",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}