component
LM3489MM
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# LM3489MM++**Texas Instruments** · DC-DC Converters · VSSOP-8-0.65mm++LM3489MM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ISENSE | input | The current sense input must be connected to the PFET drain terminal directly or through a series resistor up to 600 Ω for 28 V > VIN > 35 V (limit as printed in the datasheet). |+| 2 | GND | power_in | Signal ground for the controller. |+| 3 | EN | input | Enable pin: connect to ground to shut down the part or float to enable operation (internally pulled high and clamped at 8 V typical); recommended EN voltage is 5.5 V maximum, and it can also be used for a UVLO function. |+| 4 | FB | input | Feedback input; connect to a resistor voltage divider between the output and GND to set the adjustable output voltage. |+| 5 | ADJ | input | Current limit threshold adjustment pin tied to an internal 5.5 µA current source; a resistor between this pin and VIN sets the overcurrent threshold compared against the ISENSE voltage. |+| 6 | PGND | power_in | Power ground for the external PFET gate drive. |+| 7 | PGATE | output | Gate drive output for the external PFET, which swings between VIN and VIN minus 5 V. |+| 8 | VIN | power_in | Power supply input pin; recommended VIN supply range is 4.5 V to 35 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8-0.65mm |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `LM3489MM`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)+- 3D model files: `lm3489mm-etched.step` / `lm3489mm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm3489mm.step` / `lm3489mm.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm3489) (28 pp, sha256 `8486c86e0ce9150d`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm3489mm-datasheet.pdf)
page.jsonadded+201@@ -0,0 +1,201 @@+{+ "slug": "lm3489mm",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lm3489mm",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm3489mm.kicad_sym",+ "lm3489mm.kicad_mod",+ "lm3489mm.glb",+ "lm3489mm.step",+ "lm3489mm.lbr",+ "docs/hero.png",+ "docs/lm3489mm-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lm3489mm-hero.glb",+ "lm3489mm-hero.overlay.json"+ ],+ "component": {+ "mpn": "LM3489MM",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-8-0.65mm",+ "pin_count": 8,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm3489",+ "parts": {+ "symbol": "lm3489mm.kicad_sym",+ "footprint": "lm3489mm.kicad_mod",+ "model_3d": "lm3489mm-hero.glb",+ "model_3d_plain": "lm3489mm.glb",+ "model_3d_step": "lm3489mm-etched.step",+ "model_3d_step_plain": "lm3489mm.step",+ "lbr": "lm3489mm.lbr"+ },+ "distributor_links": {+ "lcsc": "C129961",+ "digikey": "LM3489MMTR-ND",+ "mouser": "926-LM3489MM"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T02:21:21Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "LM3489MMTR-ND",+ "status": "found",+ "lifecycle": "Obsolete"+ },+ "mouser": {+ "pn": "926-LM3489MM",+ "status": "found",+ "lifecycle": "Obsolete"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "ISENSE",+ "type": "input",+ "description": "The current sense input must be connected to the PFET drain terminal directly or through a series resistor up to 600 Ω for 28 V > VIN > 35 V (limit as printed in the datasheet)."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Signal ground for the controller."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Enable pin: connect to ground to shut down the part or float to enable operation (internally pulled high and clamped at 8 V typical); recommended EN voltage is 5.5 V maximum, and it can also be used for a UVLO function."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Feedback input; connect to a resistor voltage divider between the output and GND to set the adjustable output voltage."+ },+ {+ "number": "5",+ "name": "ADJ",+ "type": "input",+ "description": "Current limit threshold adjustment pin tied to an internal 5.5 µA current source; a resistor between this pin and VIN sets the overcurrent threshold compared against the ISENSE voltage."+ },+ {+ "number": "6",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground for the external PFET gate drive."+ },+ {+ "number": "7",+ "name": "PGATE",+ "type": "output",+ "description": "Gate drive output for the external PFET, which swings between VIN and VIN minus 5 V."+ },+ {+ "number": "8",+ "name": "VIN",+ "type": "power_in",+ "description": "Power supply input pin; recommended VIN supply range is 4.5 V to 35 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The ISENSE series-resistor limit is garbled in the extracted text ('for 28 V > VIN > 35 V'), which i; The PGATE swing is printed as 'VIN and VIN 5-V' with the minus sign apparently lost in extraction. I; The datasheet lists VIN as type 'I'. I mapped it to KiCad power_in because it is the supply input; t"+ ],+ "pages_sent": 7,+ "cost_usd": 0.0498,+ "at": "2026-10-08T02:21:07"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm3489",+ "pages": 28,+ "sha256": "8486c86e0ce9150d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lm3489mm.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2,+ 0.85+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm3489mm-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2,+ 0.85+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "0a18b7aaac57bf8393c1161ef54b661e24a6f934700a5c127e0e6f6b55c33a2e",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}